Teamson Home RJ-19048

Download PDF
Contents

Teamson Home Modern Curved Faux Slate Waterfall Fountain

Model: RJ-19048

Product Overview

The Teamson Home Modern Curved Faux Slate Waterfall Fountain is designed to bring tranquility and style to any indoor or outdoor space. Its sleek curved silhouette and textured faux slate wall, in black and gray tones, create a natural aesthetic. Water flows continuously down the surface, creating a gentle, soothing sound. Built-in LED lighting at the top and base enhances the visual appeal, making it a focal point day or night.

Teamson Home Curved Faux Slate Waterfall Fountain

Image: Front view of the Teamson Home Curved Faux Slate Waterfall Fountain with LED lights illuminated.

Teamson Home Curved Faux Slate Waterfall Fountain in an indoor setting

Image: The fountain placed indoors, showcasing its elegant design within a home environment.

Teamson Home Curved Faux Slate Waterfall Fountain in an outdoor garden

Image: The fountain situated outdoors in a garden, demonstrating its suitability for exterior decor.

Setup Instructions

  1. Unpack Components: Carefully remove all components from the packaging. Ensure all parts listed in the packing list are present.
  2. Position the Fountain: Place the fountain on a flat, level surface in your desired indoor or outdoor location. Ensure it is near a power outlet.
  3. Assemble the Fountain: The top section of the fountain slides securely into the bottom reservoir. Ensure a snug fit to prevent water leakage.
  4. Connect the Pump: Locate the pump inside the bottom reservoir. Connect the pump's tubing to the water outlet tube located at the top of the fountain.
  5. Add Water: Fill the bottom reservoir with distilled water until the pump is fully submerged and the water level is sufficient for continuous flow. The fountain has a 1.98-gallon capacity.
  6. Arrange Decorative Rocks: Place the provided decorative rocks into the bottom reservoir around the LED lights.
  7. Connect Power: Plug the power cord (72.04 inches long) into a standard electrical outlet. The water feature and LED lights will activate automatically.
Close-up of fountain base with decorative rocks and LED lights

Image: Detailed view of the fountain's base, showing the placement of decorative rocks and the illuminated LED lights.

Operating Instructions

  • Turning On/Off: The fountain operates by simply plugging it into a power outlet. To turn it off, unplug the power cord.
  • LED Lights: The fountain features built-in LED lights at the top and bottom. These lights are powered by separate plugs on the back of the unit, allowing you to turn them on or off independently of the water flow.
  • Water Flow Adjustment: The pump typically provides a consistent water flow. Ensure the water level is maintained to prevent the pump from running dry.
Close-up of fountain top with illuminated LED light

Image: Close-up of the fountain's top section, highlighting the LED light that illuminates the cascading water.

Maintenance

  • Water Level: Regularly check the water level in the reservoir. Refill with distilled water as needed to ensure the pump remains submerged and to prevent mineral buildup.
  • Cleaning: Periodically clean the fountain to prevent algae and mineral deposits. Unplug the fountain, drain the water, and wipe down surfaces with a soft cloth and mild soap. Rinse thoroughly.
  • Pump Care: Clean the pump regularly by disconnecting it and removing any debris. Refer to the pump's specific instructions for detailed cleaning.
  • Winterization (Outdoor Use): If used outdoors in freezing temperatures, drain all water from the fountain and store it indoors to prevent damage.

Troubleshooting

ProblemPossible CauseSolution
Fountain not runningNot plugged in; power outage; low water level; pump clogged.Ensure power cord is securely plugged in. Check power supply. Refill water. Clean pump.
Water flow is weakLow water level; pump clogged; kink in tubing.Add water. Clean pump. Straighten tubing.
Excessive splashingWater level too high; fountain not level.Reduce water level slightly. Ensure fountain is on a level surface.
Algae buildupExposure to sunlight; lack of cleaning.Clean regularly. Consider using an algaecide safe for fountains.

Specifications

  • Model: RJ-19048
  • Dimensions: 13.39 in. L x 8.66 in. W x 38.58 in. H
  • Weight: 13.9 Pounds (13.86 pounds)
  • Material: Polyresin (87%), Fiberglass (5%), Plastic (7.2%), Metal
  • Color: Black/Stone Grey
  • Water Capacity: 1.98 Gallons
  • Power Source: Corded Electric
  • Special Feature: Lighted (LED)
  • UPC: 810014815725
  • Manufacturer: Teamson US Inc.
  • Country of Origin: China
Diagram showing dimensions of the Teamson Home Curved Faux Slate Waterfall Fountain

Image: Dimensional diagram of the fountain, indicating its length, width, and height.

Warranty Information

This product comes with a 30-day warranty against manufacturer defects. Please retain your proof of purchase for warranty claims.

For additional protection, extended protection plans may be available for purchase from your retailer.

Customer Support

For any questions, technical assistance, or warranty inquiries, please contact Teamson Home customer support:

© 2025 Teamson Home. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.