Spurtar AIN0060BK-WIFBCA
Contents
Spurtar 180° Adjustable Car Headrest Pillow User Manual
Model: AIN0060BK-WIFBCA
1. Product Overview
The Spurtar 180° Adjustable Car Headrest Pillow is designed to provide comfortable and ergonomic head and neck support for passengers during car travel. It features memory foam cushioning and a 180° rotation capability to accommodate various heights and preferences, ensuring a restful experience.
Image 1.1: Overview of the Spurtar Car Headrest Pillow, highlighting its 180° adjustable rotation, spine protection, comfortable sleep benefits, travel essential status, motion sickness relief, and security test pass.
2. Compatibility and Important Notes
Before installation, it is crucial to verify your vehicle's compatibility with the Spurtar Car Headrest Pillow. This product is not universal and requires specific headrest configurations.
2.1 Compatibility Conditions
Your vehicle's headrest must meet both of the following conditions:
- Headrest with round poles spaced between 2 inches (50mm) and 7 inches (180mm) apart.
- No obstructions (e.g., seat belt anchors) on the sides of the headrest area where the pillow will be installed.
Image 2.1: Visual guide for checking headrest compatibility, illustrating the required pole spacing (2"-7" / 50-180mm) and the necessity of no side obstructions like seat belt anchors.
Image 2.2: Detailed measurement guide for headrest pole distance, showing minimum 2 inches (5cm) and maximum 7 inches (18cm) spacing.
2.2 Known Compatible Models
The following is a partial list of models known to be compatible. This list is not exhaustive.
Image 2.3: Chart indicating various car models that are compatible with the headrest pillow, including specific years for some makes like Jeep, Toyota, Honda, Ford, and others.
2.3 Known Incompatible Models
The following is a partial list of models known to be incompatible. This list is not exhaustive.
Image 2.4: Chart indicating various car models that are NOT compatible with the headrest pillow, including specific years for some makes like Alfa Romeo, Audi, BMW, Cadillac, Chevrolet, and others, with a special note for Tesla models.
3. Setup and Installation
The Spurtar Car Headrest Pillow is designed for easy, tool-free installation.
- Prepare Headrest: Ensure your car's headrest meets the compatibility requirements outlined in Section 2.
- Attach Base: Slide the pillow's base onto the round poles of your car's headrest.
- Secure with Rubber Pieces: Use the provided rubber pieces (3 different sizes) to ensure a snug fit around the vertical metal bars of the car's headrest. This prevents shaking.
- Adjust Width: Adjust the width of the pillow arms to match the distance between the headrest poles.
- Tighten Nuts: Fix the nuts on the left and right levers securely to prevent the pillow from falling during travel.
Image 3.1: Step-by-step visual guide for installing the car headrest pillow, showing how to attach it to the headrest poles and secure it.
Attention: Periodically check and re-fix the left and right nuts before driving to avoid loosening during your journey.
4. Operating Instructions
The Spurtar Car Headrest Pillow offers adjustable features for personalized comfort.
4.1 180° Adjustable Rotation
The side cushions can be rotated 180 degrees to find the most comfortable angle for head and neck support. This feature allows it to fit various passenger heights, from children to adults.
Image 4.1: Demonstration of the 180° rotation capability of the headrest pillow, showing how it can be adjusted for different users (kids, women, men).
4.2 Ergonomic Support
The pillow's ergonomic design provides support for your head, neck, and shoulders, promoting proper spinal alignment and reducing discomfort during long journeys. This helps prevent head flopping when sleeping, as shown in the comparison below.
Image 4.2: Comparison showing the benefit of the headrest pillow: 'Before' depicts children with unsupported heads, while 'After' shows a child comfortably supported by the pillow for peaceful sleep.
Image 4.3: Diagram illustrating the ergonomic design of the pillow, highlighting how it provides support for the head, neck, and shoulders, with examples of a child and an adult using it.
5. Maintenance
5.1 Cleaning Instructions
The fabric cover of the Spurtar Car Headrest Pillow is machine washable. Remove the cover before washing. Use a gentle cycle with cold water and mild detergent. Air dry or tumble dry on low heat. Do not bleach.
5.2 General Care
- Avoid exposing the memory foam directly to sunlight for extended periods, as this can degrade the material.
- Do not use harsh chemicals or abrasive cleaners on any part of the pillow.
- Ensure the pillow is completely dry before reassembling and using.
6. Troubleshooting
- Pillow feels loose after installation: Ensure the nuts on the left and right levers are securely tightened. Re-check them periodically, especially before long drives.
- Pillow does not fit my car: Refer to Section 2, "Compatibility and Important Notes," to confirm your vehicle meets both required conditions (headrest pole spacing and no side obstructions). This pillow is not universal.
- Pillow feels too hard: The memory foam is designed to provide firm support. If it feels excessively hard, ensure it is properly positioned and allow some time for the foam to adapt to your body heat.
7. Specifications
Image 7.1: Detailed dimensions of the Spurtar Car Headrest Pillow, including cushion thickness (1.6in/4cm), overall length (15in/38.5cm), and cushion height/width (8.7in/22cm, 5.3in/13.5cm).
| Feature | Detail |
|---|---|
| Brand | Spurtar |
| Model Number | AIN0060BK-WIFBCA |
| Special Feature | Adjustable (180° Rotation) |
| Color | Black |
| Fill Material | Memory Foam |
| Fabric Type | Fleece + ABS + PVC leather |
| Item Weight | 640 g |
| Item Dimensions (L x W) | 38.5L x 22W centimetres |
| Recommended Uses | Sleeping (Head, Neck Support) |
| Product Care Instructions | Machine Wash (Cover Only) |
8. Warranty and Support
8.1 Manufacturer's Warranty
This Spurtar product comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
8.2 Customer Support
For warranty claims, technical assistance, or any product-related inquiries, please contact Spurtar customer support.
- Manufacturer Contact Information: Calgary, AB T4A 1C6, CA
- For the most up-to-date contact methods, please visit the official Spurtar website or refer to your purchase documentation.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.