1. Introduction
Thank you for choosing the BONTEC Mobile TV Stand. This stand is designed to provide a versatile and stable solution for mounting televisions ranging from 23 to 60 inches, with a maximum load capacity of 25 kg. Its adjustable height, mobility, and integrated cable management system make it ideal for various environments, including homes, offices, and classrooms. Please read this manual carefully before assembly and use to ensure safe and optimal performance.
2. Safety Information
Always follow basic safety precautions when installing and using this product to reduce the risk of injury or damage.
- Do not exceed the maximum load capacity of 25 kg (55 lbs) for the TV mount and 10 kg (22 lbs) for the media shelf.
- Ensure the TV stand is assembled on a flat, stable surface.
- Always lock the wheels when the stand is in a stationary position to prevent accidental movement.
- Keep children and pets away from the stand during assembly and operation.
- If any parts are missing or damaged, do not attempt to assemble or use the product. Contact customer support immediately.
- Ensure all screws are tightened securely before placing a TV on the stand.
- Do not hang or climb on the TV stand.
3. Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or defective, please contact BONTEC customer service.
Image: The complete BONTEC Mobile TV Stand with a television mounted, showcasing its design and features.
3.1 Main Components
- Base with Wheels (x1)
- Main Support Column (x1, often in multiple sections for assembly)
- TV Mounting Plate (x1)
- Media Shelf (x1)
- TV Brackets (x2)
3.2 Fitting Hardware Included
Image: A detailed diagram illustrating the various types and sizes of TV mounting screws (M4, M6, M8), washers (D4, D6, D8), and spacers provided for universal compatibility.
The package includes a variety of screws, washers, and spacers to ensure compatibility with different TV models and VESA patterns. Refer to your TV's manual for the correct screw size.
- TV Mounting Screws: M4*12mm, M4*30mm, M6*20mm, M6*35mm, M8*20mm, M8*50mm
- Washers: D4, D6, D8
- Spacers: D4*5mm, D4*20mm, D6/D8*20mm
4. Setup and Assembly
Follow these steps carefully for proper assembly. It is recommended to have two people for certain steps, especially when mounting the TV.
4.1 Assemble the Base and Main Column
- Attach the main support column sections together if they are separate. Ensure they are securely fastened.
- Connect the assembled column to the base. The base features four wheels, two of which are shorter at the rear to allow closer placement to a wall.
- Tighten all bolts connecting the column to the base.
Image: A close-up view of the low-profile rear feet of the TV stand, designed to allow the stand to be positioned closer to a wall.
4.2 Attach the Media Shelf
- Slide the media shelf onto the main support column.
- Adjust the shelf to your desired height. The shelf can be adjusted to 5 different heights.
- Secure the shelf in place using the provided fasteners.
Image: A visual representation of the media shelf being adjusted vertically along the main column, demonstrating its height adjustability.
4.3 Prepare and Mount the TV
- Identify the VESA mounting holes on the back of your television. This stand supports VESA patterns up to 400x400mm.
- Attach the two TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are securely fastened and level.
- Carefully lift the television and hook the TV brackets onto the TV mounting plate on the stand.
- Secure the TV to the mounting plate using the locking mechanisms or screws provided.
- Adjust the height of the TV mounting plate as needed. The mounting plate can be adjusted to any height along the column.
Image: A diagram detailing the VESA compatibility of the stand, showing supported patterns from 75x75mm up to 400x400mm, along with overall dimensions of the stand.
Image: A visual representation of the TV mounting plate being adjusted vertically along the main column, highlighting its height adjustability.
5. Operating Instructions
5.1 Adjusting Height
The TV mounting plate and media shelf can be adjusted independently to achieve optimal viewing and usage height. Loosen the securing mechanisms, slide to the desired height, and re-tighten securely.
Image: A person adjusting the height of the television mounted on the stand, demonstrating the ease of height customization for different viewing needs.
5.2 Mobility and Locking Wheels
The stand is equipped with four 360-degree swivel wheels for easy movement. To move the stand, unlock all wheels. To secure the stand in place, press down on the locking mechanism on each wheel until it clicks into position. Ensure all wheels are locked when the stand is stationary to prevent accidental rolling.
Image: A person easily moving the BONTEC Mobile TV Stand across a room, highlighting its mobility and multi-scene use.
Image: A close-up view of one of the sturdy locking wheels, demonstrating its 360-degree swivel capability and the locking mechanism for stability.
The stand is suitable for various applications, including presentations, home entertainment, and office use.
Image: The BONTEC Mobile TV Stand in an office setting, used for a presentation with a laptop on the media shelf, demonstrating its utility in professional environments.
5.3 Cable Management
Utilize the integrated cable management system within the main column to keep cables organized and out of sight, ensuring a clean and tidy appearance.
Image: A close-up view of the integrated cable management system within the main column, showing how cables can be neatly routed and concealed.
6. Maintenance
- Regularly check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Inspect the wheels periodically for any debris or wear that might affect their smooth operation.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly or unstable. | Screws are loose; uneven assembly; weight imbalance. | Check and tighten all assembly screws. Ensure the stand is on a level surface. Redistribute weight if possible. |
| Wheels do not roll smoothly. | Wheels are locked; debris caught in wheels; damaged wheels. | Unlock the wheels. Remove any debris. If damaged, contact customer support for replacement wheels. |
| TV does not fit the mount. | Incorrect VESA pattern; TV size outside supported range. | Verify your TV's VESA pattern matches the stand's compatibility (up to 400x400mm). Ensure your TV is between 23-60 inches and within the 25kg weight limit. |
| Cannot adjust height of TV or shelf. | Securing mechanisms are too tight; obstruction. | Loosen the height adjustment screws/knobs. Check for any obstructions preventing movement. |
8. Specifications
- Model: TC003B
- Brand: BONTEC
- Material: Metal (Steel)
- Color: Black
- Compatible TV Sizes: 23 - 60 inches
- Maximum TV Weight Capacity: 25 kg (55 lbs)
- Maximum Media Shelf Capacity: 10 kg (22 lbs)
- VESA Compatibility: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 200x300mm, 300x300mm, 300x400mm, 400x300mm, 400x400mm
- Height Adjustment: TV mounting plate and media shelf are height adjustable.
- Movement Type: Swivel (wheels), Tilt (TV mount, up to 15 degrees)
- Features: Lockable wheels, integrated cable management, adjustable media shelf.
9. Warranty and Support
BONTEC products are manufactured with quality and durability in mind. For warranty information, please refer to the documentation included with your purchase or visit the official BONTEC website. If you encounter any issues or have questions regarding your BONTEC Mobile TV Stand, please contact BONTEC customer support for assistance.
Contact Information: Please refer to your product packaging or the official BONTEC website for the most up-to-date customer support contact details.
