1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Craftmade WIDC-WALL Wi-Fi Wall Control. This accessory is designed to provide convenient control over your ceiling fan's speed, light dimming, and reverse functions, with added Wi-Fi connectivity for smart home integration. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
2. Important Safety Information
WARNING: To avoid fire, shock, or serious personal injury, always turn off power at the service panel before installing, cleaning, or servicing this product.
- All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, consult a qualified electrician.
- Do not use with solid-state speed controls.
- Ensure the electrical box is properly grounded.
- Verify that the supply voltage is correct for the product (120V AC, 60Hz).
- Keep children away from electrical components.
3. Package Contents
Carefully unpack your Craftmade WIDC-WALL control and ensure all items are present. If any parts are missing or damaged, contact your retailer or Craftmade customer support immediately.
- WIDC-WALL Wi-Fi Wall Control Unit
- Mounting Screws
- Wire Connectors
- Instruction Manual
Image: Components of the Craftmade WIDC-WALL control, including the wall unit and wiring accessories.
4. Setup and Installation
Follow these steps for proper installation of your WIDC-WALL control.
- Turn Off Power: Before beginning, ensure the power to the fan circuit is turned off at the main circuit breaker.
- Remove Existing Switch: Carefully remove the existing wall switch or dimmer from the wall box. Disconnect all wires.
- Identify Wires: Identify the LINE (hot), LOAD (to fan), NEUTRAL, and GROUND wires. If you are unsure, consult a qualified electrician.
- Wire the Control: Connect the wires from the WIDC-WALL control to the corresponding wires in the wall box using the provided wire connectors.
- Connect the LINE wire from the wall box to the LINE wire on the control.
- Connect the LOAD wire from the wall box to the LOAD wire on the control.
- Connect the NEUTRAL wire from the wall box to the NEUTRAL wire on the control.
- Connect the GROUND wire from the wall box to the GROUND wire on the control.
- Mount the Control: Carefully push the wired control into the wall box. Secure it with the mounting screws. Attach the wall plate.
- Restore Power: Turn the power back on at the circuit breaker.
- Wi-Fi Pairing: Refer to the separate Wi-Fi pairing guide or the Craftmade app for instructions on connecting your wall control to your home Wi-Fi network and smart devices.
Image: Detailed view of the Craftmade WIDC-WALL control, illustrating wiring connections for installation.
5. Operating Instructions
The Craftmade WIDC-WALL control offers intuitive operation for your ceiling fan and light.
Fan Speed Control
- Power On/Off: Press the main power button to turn the fan on or off.
- Adjust Speed: Use the dedicated speed buttons (typically labeled 1-6 or with arrows) to cycle through the 6 available fan speeds.
Light Dimming
- Light On/Off: Press the light button to turn the fan light on or off.
- Dim/Brighten: Press and hold the light button to dim or brighten the light. Release when the desired brightness is achieved.
Reverse Function
- Change Direction: Press the reverse button to change the direction of the fan blades. This function is typically used to switch between downdraft (cooling) and updraft (warming) modes. Ensure the fan is off or at a low speed before engaging the reverse function.
Wi-Fi Connectivity
- Once paired with your Wi-Fi network, the control can be operated via the Craftmade mobile application or integrated with compatible smart home systems.
- Refer to the Craftmade app for advanced scheduling, voice control setup, and other smart features.
Image: Front view of the Craftmade WIDC-WALL Wi-Fi Wall Control, showing buttons for fan speed, light, and reverse functions.
6. Maintenance
The Craftmade WIDC-WALL control requires minimal maintenance.
- Cleaning: To clean the surface of the wall control, wipe it gently with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.
- No User-Serviceable Parts: There are no user-serviceable parts inside the wall control. Do not attempt to open or repair the unit yourself.
7. Troubleshooting
If you experience issues with your WIDC-WALL control, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan/Light does not respond to control. | No power to the unit; Incorrect wiring; Fan receiver issue. | Check circuit breaker. Verify wiring connections. Ensure fan receiver is functioning correctly. |
| Light does not dim. | Non-dimmable bulbs installed; Wiring issue. | Ensure dimmable LED or incandescent bulbs are used. Check light wiring. |
| Wi-Fi connection fails. | Incorrect Wi-Fi password; Router too far; Network interference. | Re-enter Wi-Fi password. Move router closer or use a Wi-Fi extender. Reduce interference from other devices. Follow in-app troubleshooting steps. |
| Fan reverse function not working. | Fan not completely stopped; Internal fan issue. | Ensure fan blades have come to a complete stop before pressing reverse. If issue persists, consult fan manual or Craftmade support. |
If you continue to experience problems, please contact Craftmade customer support.
8. Specifications
- Model Name: WIDC-WALL
- Brand: Craftmade
- Color: Black
- Control Method: Touch
- Special Feature: Wi-Fi Enabled
- Number of Power Levels: 6 (Fan Speeds)
- Power Source: DC (operates on AC house current, converts to DC for fan)
- Indoor/Outdoor Usage: Indoor
- Package Dimensions: 10.63 x 8.46 x 5.31 inches
- Item Weight: 3.52 ounces
- UPC: 647881224370
- Item Model Number: 0647881224370
9. Warranty and Support
For warranty information and customer support, please refer to the warranty card included with your product or visit the official Craftmade website. You can also contact Craftmade customer service directly for assistance with product inquiries, troubleshooting, or replacement parts.
Craftmade Customer Support:
Website: www.craftmade.com (Note: This is a placeholder URL, please refer to your product documentation for the official support website.)