Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Craftmade WIDC-WALL 6-Speed Universal DC WiFi Wall Control. Please read these instructions thoroughly before beginning installation or operation to ensure proper function and safety. This device is designed for use with DC motor fans that have a remote installed.
Product Overview
The Craftmade WIDC-WALL control offers comprehensive management of your DC motor ceiling fan and its integrated lighting. Key features include:
- 6-speed fan control.
- Light On/Off and dimming capabilities.
- Battery-operated transmitter (includes 1 23AE 12V battery).
- Integrated WiFi for control via the Bond Home app.
- Breeze feature for varied fan speeds.
- Compatibility with iOS and Android smartphones.
- Voice control support for Google Home and Amazon Alexa.
- Ability to customize timed schedules or dusk-till-dawn operation.
- Includes plate inserts (Almond, Black, White), White trim, Black Clam Shell.
Image: The Craftmade WIDC-WALL 6-Speed Universal DC WiFi Wall Control, shown with its wall plate and control buttons.
Components Included
The package contains the following items:
- Wall Control Switch
- Switchplate Cover
- Installation Guide (this document)
- 1 x 23AE 12V Battery
Setup
1. Battery Installation
The wall control transmitter is battery-operated. Locate the battery compartment, typically on the back or side of the unit. Insert the included 23AE 12V battery, ensuring correct polarity (+/-). Secure the battery compartment cover.
2. Wall Mounting
This control is designed for wall mount installation. Follow standard electrical safety procedures. Turn off power at the circuit breaker before installation. Connect the wall control wiring according to the provided wiring diagram (if applicable, refer to your fan's specific wiring instructions for DC motor fan compatibility). Secure the control unit into a standard wall box and attach the switchplate cover.
3. Wi-Fi Setup (Bond Home App)
- Download the Bond Home app from the Apple App Store (iOS) or Google Play Store (Android).
- Create an account or log in.
- Follow the in-app instructions to add your Craftmade WIDC-WALL control. This typically involves putting the control into pairing mode and connecting it to your home Wi-Fi network.
- Once connected, you can control your fan and light via the app.
Operating Instructions
1. Fan Speed Control
Use the fan speed buttons on the wall control to adjust the fan speed. There are 6 distinct speed settings. Pressing the fan speed up button will increase the speed, and pressing the fan speed down button will decrease it.
2. Light Control and Dimming
Press the light button to turn the fan light On or Off. To dim the light, press and hold the light button. Release the button when the desired brightness level is reached.
3. Breeze Feature
Activate the breeze feature by pressing the dedicated button (if available). This feature cycles the fan through various speeds to simulate a natural breeze.
4. Smartphone Control (Bond Home App)
After completing the Wi-Fi setup, open the Bond Home app on your smartphone. Select your Craftmade WIDC-WALL control to access fan speed, light, and other settings remotely.
5. Scheduling
Within the Bond Home app, you can set custom schedules for your fan and light operation, including timed on/off events or dusk-till-dawn settings.
6. Voice Control
Integrate your Craftmade WIDC-WALL with Google Home or Amazon Alexa through the Bond Home app settings. Once linked, you can use voice commands to control your fan and light (e.g., "Alexa, turn on the fan," "Hey Google, set fan speed to 3").
Maintenance
1. Battery Replacement
When the wall control's performance diminishes or it stops responding, replace the 23AE 12V battery. Follow the battery installation steps outlined in the Setup section.
2. Cleaning
To clean the wall control, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the unit.
Troubleshooting
- Control Not Responding: Check the battery. Ensure it is correctly installed and has sufficient charge. If the issue persists, try re-pairing the wall control with your fan (refer to your fan's manual for pairing instructions).
- Wi-Fi Connectivity Issues: Ensure your home Wi-Fi network is active and the signal strength is adequate where the control is installed. Restart your router if necessary. Verify the Bond Home app is updated to the latest version.
- Fan Not Operating: Confirm the fan's power supply is active at the circuit breaker. Ensure the fan's receiver is properly installed and paired with the wall control.
- Light Not Working: Check the light bulb(s) in the fan. Ensure they are correctly installed and not burnt out. Verify the light wiring connection.
- Voice Control Not Working: Confirm the Craftmade WIDC-WALL is successfully linked to your Google Home or Amazon Alexa account via the Bond Home app. Check your internet connection and ensure your voice assistant device is online.
Specifications
| Brand | Craftmade |
| Model Number | WIDC-WALL |
| Power Source | Battery Powered (1 x 23AE 12V) |
| Control Method | Remote, Amazon Alexa, Android, iOS |
| Connectivity Protocol | Wi-Fi |
| Material | Aluminum, Copper, Plastic |
| Item Dimensions (L x W x H) | 2.52"L x 2.52"W x 4.72"H |
| Item Weight | 0.2 Pounds |
| Indoor/Outdoor Usage | Indoor |
| Compatibility | DC Motor Fans with Remote Installed |
Warranty and Support
Warranty Information
This Craftmade product comes with a 1-year limited warranty. For specific details regarding warranty coverage and terms, please refer to the official Craftmade warranty documentation or contact Craftmade customer service.
Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please visit the official Craftmade website or contact their customer support department. Contact information can typically be found on the manufacturer's website or product packaging.
