PATONA Protect V1 LP-E6NH Rechargeable Battery User Manual

1. Introduction

Welcome to the user manual for your PATONA Protect V1 LP-E6NH rechargeable battery. This battery is designed to provide reliable power for your compatible Canon EOS cameras. Please read these instructions carefully before using the product to ensure safe and optimal performance.

The PATONA Protect V1 LP-E6NH battery features a 2250mAh capacity, 7.2V voltage, an NTC temperature sensor for enhanced safety, and a V1 flame-retardant housing. It also includes an info-chip for displaying remaining runtime on your camera.

2. Safety Information

To prevent damage, injury, or malfunction, always observe the following safety precautions:

Do not expose the battery to extreme temperatures (above +90°C or below -20°C) or direct sunlight.
Do not short-circuit the battery terminals.
Do not disassemble, crush, or puncture the battery.
Keep the battery away from fire and water.
Dispose of batteries responsibly according to local regulations. Do not dispose of with household waste.
Keep out of reach of children.
If the battery shows signs of damage, swelling, or leakage, discontinue use immediately.

PATONA Protect V1 battery showing temperature resistance from -20°C to +90°C in a desert environment with a camera on a tripod.

Image: The PATONA Protect V1 battery is designed to withstand temperatures ranging from -20°C to +90°C without damage to its housing or cells.

Safety symbols including exclamation mark, fire, running person, lightning bolt, CE, UKCA, FC, recycling, and crossed-out waste bin. Also includes PATONA contact information.

Image: Various safety and compliance symbols indicating proper handling, disposal, and certifications for the battery.

3. Setup and First Use

3.1. Charging the Battery

Before first use, fully charge the PATONA Protect V1 LP-E6NH battery.

Insert the battery into a compatible LP-E6NH, LP-E6N, or LP-E6 charger.
Connect the charger to a power source.
The charging indicator on your charger will show the charging status.
Once charging is complete, remove the battery from the charger.

This battery is 100% compatible with original Canon LP-E6 series chargers.

PATONA LP-E6NH battery next to a Canon camera, with text indicating 100% compatibility and ability to be charged with the original charger.

Image: The PATONA Protect V1 LP-E6NH battery is fully compatible with Canon cameras and their original chargers.

4. Operating Instructions

4.1. Inserting the Battery

Ensure your camera is turned off before inserting or removing the battery.

Open the battery compartment cover on your Canon EOS camera.
Align the battery with the compartment's contacts and slide it in until it clicks into place.
Close the battery compartment cover securely.

4.2. Compatible Camera Models

The PATONA Protect V1 LP-E6NH battery is compatible with the following Canon EOS camera models:

EOS R-Series: R5, R6, R7, R6 Mark II
EOS 5D Mark-Series: 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R
EOS 6D-Series: 6D, 6D Mark II
EOS 7D-Series: 7D, 7D Mark II
Other EOS Models: 60D, 60Da, 70D, 80D, 90D
Accessories: WFT-E5, WFT-E7
Video Cameras: XC10, XC15

4.3. Checking Battery Status

Thanks to the integrated info-chip, the remaining battery runtime can be directly read on your camera's display, similar to original batteries.

A woman holding a camera in a desert setting, with an overlay indicating 'WITH INFO-CHIP' and 'Remaining runtime directly readable'.

Image: The battery's info-chip allows for direct display of remaining runtime on compatible camera models.

5. Maintenance and Storage

Keep the battery clean and dry. Wipe contacts with a clean, dry cloth if necessary.
Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
For long-term storage, it is recommended to store the battery with a charge level of approximately 50-70%.
Avoid fully discharging the battery for extended periods, as this can reduce its lifespan.
Recharge the battery at least once every six months during long-term storage to maintain its health.

6. Troubleshooting

6.1. Battery Not Charging

Ensure the charger is properly connected to a power source.
Verify that the battery is correctly inserted into the charger.
Check if the charger or battery contacts are dirty; clean them if necessary.
Try using a different compatible charger if available.

6.2. Camera Not Powering On

Ensure the battery is fully charged and correctly inserted into the camera.
Check if the battery contacts in the camera or on the battery are dirty.
If possible, try another fully charged battery to rule out a camera issue.

6.3. Short Battery Life

Battery performance can decrease over time with repeated charge cycles.
Extreme temperatures can affect battery life; avoid using the camera in very hot or cold conditions.
Certain camera functions (e.g., video recording, live view, continuous shooting, Wi-Fi) consume more power.

7. Technical Specifications

Model Name: LP-E6NH
Part Number: 13435
Battery Type: Lithium-ion
Capacity: 2250 mAh
Voltage: 7.2 V
Energy: 16.2 Wh
Weight: 156 Grams
Dimensions (L x W x H): 8.7 x 9.2 x 2.6 cm
Operating Temperature Range: -20°C to +90°C (housing resistant up to +90°C without deformation)
Safety Features: NTC temperature sensor, V1 flame-retardant housing

Close-up image of the PATONA Protect LP-E6NH battery showing its specifications: 2250mAh, 16.2Wh, 7.2 Volt, and model name LP-E6NH.

Image: Detailed view of the PATONA Protect LP-E6NH battery with its key technical specifications.

8. Warranty and Support

PATONA products are manufactured to high-quality standards. For warranty claims or technical support, please contact PATONA customer service using the information below. Please retain your proof of purchase for warranty purposes.

Manufacturer: PATONA International S.L.U.

Address: Untere Giesswiesen 17, 78247 Hilzingen, Germany

Website: www.patona.de

Email: info@patona.de

PATONA LP-E6NH