Aramox Aramoxzgpneot06q540

Download PDF
Contents

Aramox Solar-Powered 6-Sensor TPMS Instruction Manual

Model: Aramoxzgpneot06q540

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Aramox Solar-Powered Tire Pressure Monitoring System (TPMS). This system is designed to monitor the tire pressure and temperature of up to 6 tires in real-time, enhancing driving safety for RVs, trucks, large SUVs, and similar vehicles. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. Safety Information

  • Always ensure all components are securely installed to prevent detachment during vehicle operation.
  • Do not attempt to disassemble or modify the TPMS receiver or sensors. This may void the warranty and pose safety risks.
  • Regularly check tire pressure with a calibrated gauge, even when using the TPMS, as the system is an aid and not a substitute for proper tire maintenance.
  • If an alarm sounds, safely pull over and inspect your tires immediately.
  • Keep the receiver's solar panel clean and unobstructed for optimal charging performance.

3. Package Contents

Please verify that all items are present in your package:

  • 1 x TPMS Receiver Display Unit
  • 6 x External Tire Pressure Sensors
  • 1 x USB Charging Cable
  • 1 x User Manual (this document)
  • Anti-theft nuts and wrench (may be included for external sensors)

4. Product Overview

The Aramox TPMS consists of a main display unit and six external sensors. The display unit features an LCD screen, solar panel for charging, control buttons, and a micro-USB port.

Aramox TPMS main display unit showing tire pressure and temperature readings.

Figure 4.1: Main display unit of the Aramox TPMS, showing the LCD screen with tire pressure and temperature data.

Close-up of the Aramox TPMS display unit showing control buttons, solar panel, and USB charging port.

Figure 4.2: Close-up view of the display unit's side, highlighting the control buttons, top-mounted solar panel, and micro-USB charging port.

The external sensors are compact, battery-powered units designed to be screwed onto the tire valve stems. They wirelessly transmit real-time pressure and temperature data to the display unit.

5. Specifications

FeatureSpecification
TypeTire Pressure Monitoring System (TPMS)
MaterialABS
Pressure Range0 - 116 psi / 0 - 8 bar
Operating Frequency433.92 MHz
Accuracy± 1.5 PSI
Pressure UnitPSI / BAR
Temperature UnitCelsius / Fahrenheit
Operating VoltageDC 5V
Waterproof LevelIP67 (Sensors)
Sensor BatteryCR1632 button cell (integrated)
Receiver Battery400 mAh Polymer Lithium Battery (integrated)
Sensor Battery Life1.5 - 2 years
Receiver Charging ModeUSB, Solar
Application RangeRVs, Trucks, Large SUVs, Big G, Vans, Pickups, etc.

6. Setup

6.1 Initial Receiver Charging

Before first use, it is recommended to fully charge the receiver unit using the provided USB cable. Connect the micro-USB end to the receiver's port and the standard USB end to a 5V USB power source (e.g., car charger, computer USB port).

6.2 Receiver Placement

Place the receiver unit on your vehicle's dashboard where it has a clear view of the sky for optimal solar charging and is easily visible to the driver. Ensure it does not obstruct your view or interfere with airbags.

Aramox TPMS display unit placed on a car dashboard.

Figure 6.1: Example placement of the TPMS display unit on a vehicle dashboard for clear visibility and solar charging.

6.3 Sensor Installation

  1. Identify the correct position for each sensor (e.g., Front Left, Front Right, Rear Left, Rear Right, etc.). The sensors are typically labeled or can be assigned during pairing.
  2. Remove the original valve cap from the tire valve stem.
  3. If anti-theft nuts are provided, first screw an anti-theft nut onto the valve stem.
  4. Screw the corresponding external sensor onto the valve stem until it is hand-tight.
  5. If using anti-theft nuts, tighten the nut against the sensor using the provided wrench.
  6. Repeat for all 6 tires.

The sensors are typically pre-paired with the receiver. If new sensors are added or pairing is lost, refer to the operating instructions for re-pairing procedures.

7. Operating Instructions

7.1 Power On/Off

The receiver unit typically powers on automatically when it detects vibration (vehicle movement) or receives sufficient solar charge. To manually power on/off, press and hold the 'OK' or power button (refer to Figure 4.2 for button locations).

7.2 Display Information

The LCD screen displays real-time pressure and temperature for each of the 6 tires, along with the receiver's battery status. A central tire icon indicates the overall system status.

Aramox TPMS display showing pressure and temperature for 6 tires.

Figure 7.1: The TPMS display unit showing real-time pressure and temperature readings for all six connected tires.

7.3 Unit Switching (PSI/Bar, °C/°F)

Press the 'SET' button to enter the settings menu. Use the 'OK' or navigation buttons to cycle through options such as pressure unit (PSI/Bar) and temperature unit (°C/°F). Press 'SET' again to confirm your selection and exit the menu.

7.4 Alarm Settings

In the settings menu, you can adjust the high-pressure, low-pressure, and high-temperature alarm thresholds. Set these values according to your vehicle's recommended tire specifications. The system will alert you visually and audibly if any tire's parameters exceed these set limits.

8. Maintenance

8.1 Cleaning

Wipe the receiver display unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the solar panel remains clean for efficient charging.

8.2 Sensor Battery Replacement

The external sensors use CR1632 button cell batteries. When a sensor's battery is low, the display unit will indicate it. To replace: unscrew the sensor from the valve stem, carefully open the sensor casing, replace the CR1632 battery, and reassemble. Ensure the waterproof seal is correctly seated before tightening.

8.3 Receiver Charging

The receiver charges via its integrated solar panel or the micro-USB port. For prolonged periods of low light or heavy use, use the USB charging cable to maintain battery levels.

9. Troubleshooting

ProblemPossible CauseSolution
Receiver display is blankLow battery; Unit is off; No vibration detected.Charge via USB; Press and hold power button; Move vehicle to activate.
Sensor not displaying dataSensor battery low/dead; Sensor not installed correctly; Sensor not paired.Replace sensor battery; Re-install sensor securely; Re-pair sensor (refer to specific pairing instructions if needed).
Inaccurate pressure/temperature readingsSensor not fully tightened; External interference.Ensure sensor is tightly screwed on; Check tire pressure with a manual gauge for comparison.
Alarm triggers frequentlyAlarm thresholds set too close to normal operating pressure/temperature; Actual tire issue.Adjust alarm thresholds in settings; Check actual tire pressure and temperature.

10. Warranty and Support

Aramox products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or further assistance, please contact your retailer or Aramox customer service with your purchase details and model number.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.