YOUkei Screen Protector for Skagen Hybrid Smartwatch HR 38mm

1. Introduction

Thank you for choosing the YOUkei Premium High Definition Ultra HD Film screen protector for your Skagen Hybrid Smartwatch HR 38mm. This screen protector is designed to offer superior protection against scratches, dirt, and accidental drops while maintaining the original clarity and touch sensitivity of your smartwatch display. This manual provides comprehensive instructions for proper installation and care to ensure optimal performance and longevity of your screen protector.

2. Package Contents

Please verify that all items are present in your package:

• YOUkei Screen Protectors (6 pieces)
• Wet Wipes
• Dry Wipes
• Fiber Cloth
• Dust Removal Stickers / Guide Stickers

3. Installation Guide

Follow these steps carefully for a bubble-free installation. Ensure you are in a clean, dust-free environment.

Image: Visual guide for screen protector installation, showing six distinct steps from cleaning to final application.

1. Clean the Screen: Use the provided wet wipe to thoroughly clean your smartwatch screen. Follow with the dry wipe to remove any moisture. Finally, use the fiber cloth to polish the screen and remove any remaining dust or smudges. Ensure the screen is completely dry and free of particles.
2. Remove Back Stick 1: Carefully peel off the protective film labeled "Back Stick 1" from the screen protector. Avoid touching the adhesive side.
3. Align the Position: Gently align the screen protector with your smartwatch screen. Pay close attention to the edges and any cutouts (e.g., for sensors).
4. Align Edge and Stick: Once aligned, slowly lower the screen protector onto the screen, starting from one edge and allowing it to adhere gradually.
5. Press to Edge: Use your finger or a soft card (not included) to gently press the entire screen protector, working from the center outwards to the edges. This helps to remove air bubbles.
6. Remove Stick 2: Carefully peel off the top protective film labeled "Stick 2". If any small bubbles remain, gently push them towards the nearest edge with your finger or the fiber cloth.

Image: Demonstrates the careful peeling of the screen protector from its backing.

4. Maintenance

To ensure the longevity and clarity of your screen protector:

• Clean the screen protector regularly with a soft, lint-free cloth.
• For stubborn smudges, lightly dampen the cloth with water or a screen cleaner specifically designed for electronics.
• Avoid using harsh chemicals, abrasive materials, or excessive force when cleaning, as this may damage the protector.

5. Troubleshooting

Common issues and their solutions:

• Bubbles After Installation: Small bubbles often disappear within 24-48 hours as the adhesive settles. For larger bubbles, gently lift the nearest edge of the protector and reapply, pushing the bubble out with a soft cloth. Ensure no dust particles are trapped underneath.
• Dust Particles Underneath: If dust is trapped, carefully lift the nearest edge of the protector and use a dust removal sticker (if available) or a piece of tape to gently dab the dust particle off the adhesive side. Reapply the protector.
• Edges Not Sticking: Ensure the screen was thoroughly cleaned and dry before application. Press firmly along the edges for a few seconds. If the issue persists, the protector may need to be replaced.

6. Product Specifications

7. Warranty and Support

For any quality-related issues, please contact YOUkei customer support directly. We offer a replacement or refund for defective items within 30 days from the date of purchase. Please retain your proof of purchase for warranty claims.

Contact Information: Please refer to your purchase platform or product packaging for specific customer service contact details.