1. Introduction
Thank you for choosing the SOMLIGHT T8 LED Tube Light Bulb. This manual provides essential information for the safe installation, operation, and maintenance of your new LED lighting product. These 4-foot LED tubes are designed as energy-efficient replacements for traditional T8, T10, and T12 fluorescent bulbs, requiring a ballast bypass installation.

Image 1.1: SOMLIGHT T8 LED Tube Light Bulbs
2. Safety Information
WARNING: Risk of electric shock. Installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- Always turn off power at the circuit breaker before inspection, installation, or removal.
- Do not use with dimmers unless explicitly stated as dimmable. This product is not dimmable.
- Do not install this product in a fixture that uses a ballast. The ballast must be bypassed or removed.
- Ensure all connections are secure and properly insulated.
- Do not bend or apply excessive force to the LED tube.
- Suitable for indoor and outdoor use, but ensure the fixture itself is rated for the environment.
3. Package Contents
Your package contains the specified quantity of SOMLIGHT T8 LED Tube Light Bulbs.
- SOMLIGHT T8 LED Tube Light Bulbs (Quantity as per purchase)
4. Installation Instructions (Ballast Bypass)
These LED tubes are designed for direct wire installation, requiring the removal or bypass of the existing fluorescent ballast. This is a double-ended power design.
Important Safety Note:
Installation must be performed by a qualified electrician or trained personnel. Failure to follow these instructions can result in electric shock, fire, or damage to the product and property.
Wiring Diagram:

Image 4.1: Ballast Bypass Wiring Diagram
Step-by-Step Installation:
- Turn Off Power: Locate the circuit breaker controlling the fixture and turn off the power. Verify power is off using a voltage tester.
- Remove Existing Fluorescent Tube: Carefully remove the old fluorescent tube(s) from the fixture.
- Access Ballast: Open the fixture to access the wiring compartment and the ballast.
- Remove/Bypass Ballast:
- Cut all wires leading to and from the ballast.
- Remove the ballast completely from the fixture.
- Identify the line (hot) and neutral wires coming from the power source.
- Rewire Fixture for Double-Ended Power:
- Connect the line (hot) wire to the shunted tombstone (socket) on one end of the fixture.
- Connect the neutral wire to the shunted tombstone (socket) on the opposite end of the fixture.
- Ensure all connections are made with appropriate wire connectors (e.g., wire nuts) and are securely insulated.
- Install LED Tube: Insert the SOMLIGHT T8 LED tube into the modified fixture sockets. Ensure the pins are properly seated.
- Restore Power: Close the fixture cover, then turn the power back on at the circuit breaker.

Image 4.2: Visual Comparison: Fluorescent vs. LED Replacement
5. Operating Instructions
Once properly installed and wired, the SOMLIGHT T8 LED Tube Light Bulb operates like any standard light fixture. Simply use the wall switch or fixture switch to turn the light on or off.
6. Maintenance
The SOMLIGHT T8 LED Tube Light Bulb requires minimal maintenance.
- Cleaning: Ensure power is off at the circuit breaker before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the tube. Do not use harsh chemicals or abrasive cleaners.
- No User-Serviceable Parts: The LED tube contains no user-serviceable parts. Do not attempt to open or modify the product.
7. Troubleshooting
If you experience issues with your SOMLIGHT T8 LED Tube Light Bulb, refer to the following common problems and solutions:
- Light does not turn on:
- Check if the power is on at the circuit breaker.
- Verify that the LED tube is properly seated in the fixture sockets.
- Ensure the ballast has been completely bypassed and the fixture is correctly wired for direct power.
- Test the fixture with another known working LED tube, if available.
- Light flickers:
- Confirm all wiring connections are secure. Loose connections can cause flickering.
- Ensure the fixture is not connected to a dimmer switch, as this product is not dimmable.
If problems persist after troubleshooting, contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | SOMLIGHT |
| Model | T8 LED Tube Light Bulb |
| Light Type | LED |
| Length | 4FT (48 inches) |
| Wattage | 22 Watts |
| Color Temperature | 5000 Kelvin (Daylight White) |
| Brightness | 2200 Lumens |
| Bulb Shape Size | T8 |
| Bulb Base | G13 Bi-Pin |
| Voltage | 120 Volts |
| Power Type | Double Ended Power (Ballast Bypass Required) |
| Material | Aluminum, Plastic |
| Dimmable | No |
| Indoor/Outdoor Usage | Indoor, Outdoor (when used in appropriate fixture) |

Image 8.1: SOMLIGHT T8 LED Tube Light Bulb Dimensions

Image 8.2: Key Features: G13 Base, SMD Light Source, Heat Dissipation
9. Warranty and Support
SOMLIGHT products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official SOMLIGHT website. Please have your product model and purchase date available when contacting support.