1. Introduction
Thank you for choosing the Adesso Harriet LED Table Lantern. This manual provides essential information for the safe and efficient use of your new lighting product. Please read these instructions carefully before installation and operation, and retain them for future reference.
The Harriet LED Table Lantern features a unique design with a brown marble base, an antique brass finish, and a clear textured glass shade, providing warm, energy-efficient LED illumination.
2. Safety Information
Please observe the following safety precautions to prevent injury or damage:
- This product is designed for indoor use only. Do not expose to moisture or outdoor elements.
- Ensure the power supply is disconnected before installation, cleaning, or maintenance.
- This lighting product is UL or ETL listed, meaning it has been tested and approved to meet government-regulated safety standards for the USA.
- The integrated LED light source is energy-efficient, long-lasting (up to 50,000 hours), shatterproof, and does not contain harmful materials or emit UV rays. It operates at a safe temperature.
- Do not attempt to modify the lamp or its components. Any modifications may void the warranty and create a safety hazard.
- Keep the lamp away from flammable materials.
3. Package Contents
Carefully unpack all components and check for any damage. Ensure all items listed below are present:
- Adesso Harriet LED Table Lantern (Base with integrated LED and glass shade)
- LED Bulb (GU10 type, if not pre-installed)
- Remote Control (if included with the LED bulb for advanced features)
If any parts are missing or damaged, please contact Adesso customer support.
4. Setup Instructions
- Unpack: Carefully remove all components from the packaging. Retain packaging materials for future transport or returns.
- Placement: Place the lamp on a stable, flat tabletop surface. Ensure there is adequate space around the lamp for proper ventilation and to prevent accidental tipping.
- Bulb Installation (if applicable): If the GU10 LED bulb is not pre-installed, gently insert it into the socket within the lamp shade. Twist clockwise until secure.
- Connect Power: Plug the power cord into a standard electrical outlet.
5. Operating Instructions
The Adesso Harriet LED Table Lantern is designed for simple operation:
- Power On/Off: The lamp features a sleek touch switch located on the base. Gently touch the switch to turn the lamp on or off.
- Lighting: The lamp provides warm, energy-efficient LED lighting at 230 Lumens with a color temperature of 3,000K and a Color Rendering Index (CRI) of 80.
- Remote Control (Optional): If your specific LED bulb includes remote control functionality, please refer to the separate instructions provided with the bulb for details on its operation (e.g., dimming, color temperature adjustments). The lamp's integrated touch switch primarily controls basic on/off functionality.
6. Maintenance
To ensure the longevity and appearance of your lamp, follow these maintenance guidelines:
- Cleaning: Disconnect the lamp from power before cleaning. Use a soft, dry cloth to wipe the metal and marble surfaces. For the glass shade, a slightly damp cloth can be used, followed by a dry cloth to prevent water spots. Do not use abrasive cleaners, solvents, or polishes, as these can damage the finish.
- Bulb Replacement: The integrated LED is designed for long life. If replacement is ever necessary, ensure the lamp is unplugged. The bulb base is GU10. Use only GU10 LED bulbs of appropriate wattage (maximum 4 watts).
- General Care: Avoid placing the lamp in direct sunlight or near heat sources, which can affect the marble and metal finishes.
7. Troubleshooting
If you encounter issues with your Adesso Harriet LED Table Lantern, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power to the outlet. | Check if the outlet is functional by plugging in another device. Check circuit breaker. |
| Lamp does not turn on. | Power cord not fully plugged in. | Ensure the power cord is securely plugged into both the lamp and the wall outlet. |
| Lamp does not turn on. | LED bulb is faulty or not installed correctly. | Unplug the lamp, then check if the GU10 LED bulb is securely seated. If necessary, replace with a new GU10 LED bulb (max 4 watts). |
| Touch switch is unresponsive. | Dust or debris on the switch. | Gently clean the touch switch area with a dry, soft cloth. |
If the problem persists after attempting these solutions, please contact Adesso customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | Harriet LED Table Lantern |
| Model Number | 3697-21 |
| Brand | Adesso |
| Product Dimensions | 3"D x 3"W x 19"H |
| Item Weight | 3.94 pounds |
| Material | Metal, Marble, Glass |
| Base Material | Marble |
| Shade Material | Glass |
| Finish Type | Antique Brass |
| Color | Bronze |
| Light Source Type | LED |
| Wattage | 4 watts |
| Bulb Base | GU10 |
| Lumen Output | 230 Lumens |
| Color Temperature | 3,000K |
| CRI | 80 |
| Switch Type | Touch |
| Power Source | Corded Electric |
| Indoor/Outdoor Usage | Indoor |
| Certifications | UL or ETL Listed |
9. Warranty and Support
The Adesso Harriet LED Table Lantern is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
The warranty does not cover:
- Damage caused by improper installation or assembly.
- Damage caused by misuse, abuse, or negligence.
- Damage caused by unauthorized repairs or modifications.
- Normal wear and tear.
For warranty claims, technical support, or to purchase replacement parts, please contact Adesso customer service. Have your model number (3697-21) and proof of purchase ready.
For more information, visit the official Adesso website or contact their customer support directly.