1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Pelco P2230L-ESR 2MP IR WDR Full HD Environmental PTZ Network Outdoor Dome Camera. This camera is designed for robust outdoor surveillance applications, offering high-definition video capture and advanced features for comprehensive monitoring.
2. Product Overview
The Pelco P2230L-ESR is a high-performance Pan-Tilt-Zoom (PTZ) dome camera engineered for demanding outdoor environments. Key features include:
- Sensor: 1/3-inch CMOS Sensor with 1920 x 1080 resolution.
- Lens: 4.3 mm ~ 129 mm varifocal lens with 30x optical zoom.
- Infrared (IR) Illumination: Up to 150 meters range with proportional brightness based on zoom level.
- Wide Dynamic Range (WDR): 100 dB for clear images in challenging lighting conditions.
- Video Encoding: Supports H.265, H.264, and MJPEG formats.
- Frame Rate: Up to 60 images per second (ips) at Full HD 1080p.
- Environmental Protection: IP66 weatherproof rating for outdoor use.
- Detection: Sabotage and simple motion detection capabilities.
- Pan/Tilt Range: Tilt range from +15° to –90° degrees.
- Low Light Performance: Operates down to 0.3 lux.
Figure 2.1: Pelco P2230L-ESR PTZ Network Outdoor Dome Camera. This image displays the camera's dome form factor with its white upper housing and dark lower camera module.
3. Setup
3.1. Physical Installation
The P2230L-ESR camera is designed for outdoor installation and features an IP66 weatherproof rating. Ensure the mounting surface is stable and capable of supporting the camera's weight. The mounting type is optional, allowing for various installation methods depending on your specific requirements. Refer to the separate installation guide for detailed mounting instructions and hardware requirements.
3.2. Electrical and Network Connections
Connect the camera to a power source (AC/DC) and your network. The camera supports both wired (RJ45) and wireless (Wi-Fi) connectivity. For wired connections, use a standard Ethernet cable. For wireless connections, ensure the camera is within range of your Wi-Fi network.
Figure 3.1: RJ45 Ethernet Cable. This image shows a blue Ethernet cable with clear RJ45 connectors, typically used for wired network connections.
After physical installation and connection, proceed with network configuration using the Pelco software or web interface to assign an IP address and configure network settings.
4. Operating Instructions
4.1. Basic Operation
The camera's Pan-Tilt-Zoom (PTZ) functions can be controlled remotely. Utilize the 30x optical zoom to focus on specific areas of interest. The tilt mechanism allows for a range of +15° to –90° degrees, providing flexible viewing angles.
4.2. Video Monitoring and Recording
The P2230L-ESR captures video at 2MP resolution, delivering Full HD 1080p video at up to 60 images per second. Video can be recorded in MJPEG, MP4, H.264, or H.265 formats. Configure recording settings, including resolution, frame rate, and storage options, through the camera's interface.
4.3. Advanced Features
- IR Illumination: The integrated 850 nm IR illuminators provide clear night vision up to 150 meters. The brightness adjusts proportionally with the zoom level to ensure optimal illumination.
- Wide Dynamic Range (WDR): The 100 dB WDR feature compensates for extreme lighting variations, ensuring details are visible in both bright and dark areas of the scene.
- Motion and Sabotage Detection: Configure the camera to detect motion within specified zones or to alert you to attempts to obstruct or tamper with the camera (sabotage detection).
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your camera:
- Lens Cleaning: Periodically clean the camera lens with a soft, lint-free cloth and a mild lens cleaning solution. Avoid abrasive materials.
- Housing Inspection: Inspect the camera housing for any signs of damage or wear, especially seals, to maintain its IP66 rating.
- Cable Connections: Verify that all power and network cables are securely connected and free from damage.
- Software Updates: Check the Pelco website for firmware updates to ensure your camera has the latest features and security enhancements.
6. Troubleshooting
If you encounter issues with your camera, consider the following common troubleshooting steps:
- No Power: Ensure the power supply is correctly connected and functioning. Check power cables for damage.
- No Network Connection: Verify Ethernet cable connection or Wi-Fi signal strength. Check network settings and IP address configuration.
- Poor Image Quality: Clean the lens. Adjust focus and zoom settings. Check for obstructions. Ensure sufficient lighting or proper IR illumination.
- PTZ Not Responding: Check network connectivity and control method settings. Ensure no physical obstructions are impeding movement.
For persistent issues, consult the Pelco support website or contact technical support.
7. Specifications
Detailed technical specifications for the Pelco P2230L-ESR camera:
| Feature | Detail |
|---|---|
| Model Number | P2230L-ESR |
| Sensor | 1/3-inch CMOS |
| Video Capture Resolution | 2MP (1920 x 1080) |
| Lens | 4.3 mm ~ 129 mm varifocal |
| Optical Zoom | 30x |
| IR Range | Up to 150 m |
| Wide Dynamic Range (WDR) | 100 dB |
| Frame Rate | Up to 60 ips (1080p) |
| Video Encoding | H.265, H.264, MJPEG |
| Connectivity Technology | Wireless (Wi-Fi), Wired (RJ45) |
| Power Source | AC/DC |
| International Protection Rating | IP66 |
| Control Method | Remote |
| Alert Type | Motion Only |
| Indoor/Outdoor Usage | Outdoor |
Figure 7.1: Dimensional Drawing of Pelco P2230L-ESR. This diagram provides various views and measurements (in inches and millimeters) of the camera's physical dimensions, useful for installation planning.
8. Warranty and Support
For specific warranty information, please refer to the documentation provided with your purchase or visit the official Pelco website. Technical support can be accessed through the manufacturer's customer service channels, typically found on their website or through your authorized dealer.
