Relaxdays Metal Storage Shelf Instruction Manual

1. Introduction

Thank you for choosing the Relaxdays Metal Storage Shelf, Model 10034170. This manual provides essential information for the safe assembly, operation, and maintenance of your new shelving unit. Please read these instructions carefully before beginning assembly and retain them for future reference.

2. Safety Information

• Weight Capacity: Do not exceed a maximum load of 70 kg (approximately 154 lbs) per shelf. The total maximum load capacity for the entire unit is 280 kg (approximately 617 lbs). Overloading can lead to structural failure and injury.
• Stability: For enhanced stability, especially when storing heavy items or in areas with potential movement, it is highly recommended to secure the shelving unit to a wall using appropriate fasteners (not included).
• Children: Keep children away from the shelving unit during assembly and ensure it is securely installed to prevent tipping hazards.
• Assembly: Always follow the assembly instructions precisely. Incorrect assembly can compromise the stability and safety of the unit.
• Shelf Material: The shelves are made of MDF (Medium-Density Fibreboard). Avoid placing wet or damp items directly on the shelves, as this can cause warping or damage.

3. Package Contents

Please verify that all components are present before starting assembly:

• 1x Versatile Metal Shelving Unit (unassembled components)
• 4x MDF Shelves
• 8x Anti-scratch inserts (for feet)
• Assembly instructions sheet

4. Setup and Assembly Instructions

The Relaxdays Metal Storage Shelf features an interlocking system for easy assembly. No screws are required for the main frame assembly, but a rubber mallet and a flat-blade screwdriver (for widening connections if needed) are recommended tools.

Required Tools:

• Rubber Mallet
• Flat-blade Screwdriver (optional, for minor adjustments)

Assembly Steps:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Check against the package contents list.
2. Assemble Vertical Posts: Connect the vertical metal posts using the interlocking tabs. Ensure all tabs are fully engaged. A rubber mallet can be used to gently tap connections into place for a secure fit.
3. Attach Crossbeams: Insert the horizontal crossbeams into the slots on the vertical posts at your desired shelf heights. The shelves are adjustable, allowing for flexible storage configurations. Ensure all tabs are securely interlocked.
4. Insert MDF Shelves: Once the frame is assembled, carefully place the MDF shelves onto the crossbeams. Ensure they sit flush and are stable.
5. Attach Anti-scratch Inserts: Place the 8 anti-scratch inserts onto the bottom of the vertical posts to protect your floor surfaces.
6. Final Check: Before loading, gently shake the assembled unit to ensure all connections are secure and the shelf is stable.

5. Operating Instructions (Usage)

This metal storage shelf is designed for versatile use in various environments such as garages, workshops, cellars, and pantries. Its robust galvanized steel construction provides durability, and the MDF shelves offer ample storage space.

• Adjustable Shelves: The shelves can be adjusted to different heights to accommodate items of various sizes. Simply reposition the crossbeams to your desired level.
• Convertible Design: The unit can be assembled as one tall, 4-tier shelf or split into two smaller, 2-tier shelving units. This flexibility allows you to adapt the storage solution to your specific needs and available space.
• Load Distribution: Distribute weight evenly across each shelf to maintain stability and prevent damage. Avoid concentrating heavy loads in one small area.

6. Maintenance

To ensure the longevity and appearance of your Relaxdays Metal Storage Shelf, follow these simple maintenance guidelines:

• Cleaning: Clean the metal frame and MDF shelves with a dry cloth. Avoid using abrasive cleaners or harsh chemicals, which can damage the galvanized finish or the MDF.
• Moisture: Protect the MDF shelves from excessive moisture or spills. Wipe up any liquids immediately to prevent warping or swelling of the wood material.
• Regular Checks: Periodically inspect all connections to ensure they remain tight and secure. Re-tap with a rubber mallet if any connections feel loose.

7. Troubleshooting

If you encounter any issues with your shelving unit, consider the following common solutions:

• Instability/Wobbling:
  • Ensure all interlocking tabs are fully engaged. Use a rubber mallet to secure connections.
  • Verify the unit is placed on a level surface. Adjust the anti-scratch inserts if necessary to compensate for uneven floors.
  • If storing heavy items, ensure the unit is securely anchored to a wall.
• Shelves Warping:
  • Avoid placing wet or damp items directly on the MDF shelves.
  • Ensure weight is distributed evenly and not exceeding the 70 kg per shelf limit.
• Difficulty Assembling:
  • Some connections may require a gentle tap with a rubber mallet to fully engage.
  • A flat-blade screwdriver can be used carefully to slightly widen tabs if they are too tight, but avoid excessive force to prevent damage.

8. Specifications

9. Warranty and Support

This product does not come with an explicit warranty from the manufacturer as per available information. For any questions, missing parts, or support needs, please contact your retailer or the Relaxdays customer service directly.