Streamlight 69470

Streamlight TLR-10 Flex Tactical Weapon Light User Manual

Model: 69470

1. Introduction

This manual provides detailed instructions for the safe and effective use of your Streamlight TLR-10 Flex Tactical Weapon Light. The TLR-10 Flex is a high-performance, rail-mounted tactical light featuring an integrated Class 3R red laser. It is designed for full-frame weapons, offering powerful illumination and precise targeting capabilities in various environments. The unit incorporates advanced LED technology, delivering 1,000 lumens of light with a 200-meter beam distance and optimized peripheral illumination. Constructed from durable 6000 series machined aircraft aluminum with a black anodized finish and an impact-resistant polymer switch housing, the TLR-10 Flex is built for reliability. Its BOROFLOAT® glass lens ensures resistance to high temperatures and shock. The device offers 1.5 hours of continuous run time with both light and laser, and 11 hours with the laser only. Ambidextrous rear switches provide easy operation across three selectable modes: LED only, laser only, and a combined LED and Laser mode, plus a strobe function. With an IPX4 water resistance rating and a wide operating temperature range, the TLR-10 Flex is suitable for extreme conditions and has undergone extensive live-fire testing.

2. Safety Information

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Always handle the TLR-10 Flex and any attached weapon responsibly. Ensure the weapon is unloaded and safe before installing, removing, or performing maintenance on the light. Avoid direct eye exposure to the laser beam. Do not attempt to disassemble or modify the unit beyond the instructions provided in this manual.

3. Package Contents

  • Streamlight TLR-10 Flex Tactical Weapon Light
  • 2 x CR123A Lithium Batteries
  • Key Kit for weapon mounting
  • User Guide (this document)

4. Specifications

FeatureSpecification
Model Number69470
Light Output (White LED)1000 Lumens
Beam Intensity10,000 Candela
Beam Distance200 Meters
Laser TypeClass 3R Red Laser
Laser Output<5mW
Laser Wavelength640-660nm
Run Time (Light Only)1.5 hours
Run Time (Laser Only)11 hours
Power Source2 x CR123A Lithium Batteries (included)
Voltage6 Volts
Material6000 Series Machined Aircraft Aluminum
FinishBlack Anodized
Lens MaterialBOROFLOAT® Glass
Water ResistanceIPX4 (Water Resistant)
Operating Temperature-40°F to +120°F (-40°C to +49°C)
Dimensions (L x W x H)4.97" x 1.18" x 1.5"
Item Weight4.5 ounces (0.28 Pounds)
Mounting TypeRail Mount (Fast Rail Clamp)
Special FeaturesAmbidextrous Rear Switches, Strobe Mode, Safe Off Feature
Streamlight TLR-10 Flex with dimensions

Image: The Streamlight TLR-10 Flex showing its key dimensions and performance metrics: 1000 lumens max output, 1.5 hours max runtime, 200 meters max distance, and uses 2 CR123A batteries.

5. Setup

5.1 Battery Installation

  1. Ensure the weapon is unloaded and safe.
  2. Unscrew the head of the light counter-clockwise to open the battery compartment.
  3. Insert two (2) CR123A lithium batteries with the positive (+) end facing forward (towards the light head).
  4. Screw the head back on clockwise until secure.
  5. Test the light to ensure proper function.
Streamlight TLR-10 Flex front view

Image: Front view of the Streamlight TLR-10 Flex, showing the light head where batteries are installed and the rail clamp mechanism.

5.2 Mounting to a Weapon Rail

The TLR-10 Flex is designed for secure attachment to a broad range of weapon rails using the provided key kit. Refer to Streamlight's official fit guide for specific weapon compatibility before installation.

  1. Ensure the weapon is unloaded and safe.
  2. Select the appropriate key from the key kit that matches your weapon's rail system.
  3. Loosen the rail clamp screw on the TLR-10 Flex.
  4. Align the light with the weapon rail, ensuring the selected key fits into the rail slot.
  5. Tighten the rail clamp screw securely. Do not overtighten.
  6. Verify that the light is firmly attached and does not wobble.
Streamlight TLR-10 Flex side view

Image: Side view of the Streamlight TLR-10 Flex, illustrating the rail clamp and the ambidextrous rear switches.

5.3 Rear Switch Options

The TLR-10 Flex comes with interchangeable rear switches to accommodate different grip styles. The "Low Switch" is suitable for a lower grip, while the "High Switch" is for a higher grip.

Streamlight TLR-10 Flex with Low Switch

Low Switch for lower grip style

Streamlight TLR-10 Flex with High Switch

High Switch for higher grip style

Image: Comparison of the Streamlight TLR-10 Flex with the Low Switch and High Switch options, demonstrating how different rear switches can accommodate various grip preferences.

6. Operating Instructions

6.1 Basic Operation (Light and Laser)

The TLR-10 Flex features ambidextrous rear switches for easy activation. The unit offers three primary modes: LED only, Laser only, and a combined LED and Laser mode.

  • Momentary Activation: Press and hold either rear switch. Release to turn off.
  • Constant On: Press and quickly release either rear switch. Press again to turn off.

6.2 Mode Selection

To cycle through the available modes (LED only, Laser only, LED & Laser), press and hold one of the rear switches, then quickly tap the other switch. Repeat this action to cycle to the next mode. The device will remember the last selected mode when turned off and on again.

6.3 Strobe Mode

To activate the strobe function, quickly double-tap either rear switch (within 0.4 seconds). To turn off the strobe, press and release either switch.

6.4 Safe Off Feature

The "Safe Off" feature prevents accidental activation and conserves battery life. To engage Safe Off, rotate the light head counter-clockwise approximately 1/4 turn until it clicks. To disengage, rotate clockwise until it clicks and is fully tightened.

6.5 Laser Aiming Adjustment

The integrated red laser can be adjusted for windage and elevation. Use a small flathead screwdriver or the appropriate tool from the key kit to make fine adjustments. The adjustment screws are typically located on the side and bottom of the laser housing. Turn the screws incrementally and test the laser's point of impact until it aligns with your desired aiming point.

Streamlight TLR-10 Flex with red laser aiming

Image: The Streamlight TLR-10 Flex mounted on a weapon, demonstrating the integrated red aiming laser in use.

7. Maintenance

  • Cleaning: Wipe the lens and body with a clean, soft cloth. For stubborn dirt, a damp cloth can be used. Do not use abrasive cleaners or solvents.
  • Battery Replacement: Replace batteries when the light output diminishes or the laser becomes weak. Always use fresh, high-quality CR123A lithium batteries. Dispose of old batteries according to local regulations.
  • O-Rings: Periodically inspect the O-rings for wear and tear. Apply a thin coat of silicone grease to maintain water resistance.
  • Storage: For long-term storage, remove the batteries to prevent leakage and store the unit in a cool, dry place.

8. Troubleshooting

ProblemPossible CauseSolution
Light/Laser does not turn on.Dead or improperly installed batteries. Safe Off feature engaged.Replace batteries with fresh ones, ensuring correct polarity. Disengage Safe Off by tightening the light head.
Light output is dim or flickers.Low battery power. Loose connections.Replace batteries. Ensure light head is fully tightened. Clean battery contacts if necessary.
Laser does not align properly.Laser adjustment screws require calibration.Refer to Section 6.5 for laser aiming adjustment instructions.
Light detaches or wobbles on rail.Rail clamp not tightened sufficiently. Incorrect key used.Ensure rail clamp screw is securely tightened. Verify the correct key is installed for your weapon's rail.
Water ingress.Damaged or improperly seated O-rings. Light head not fully tightened.Inspect O-rings for damage and replace if necessary. Ensure light head is fully tightened.

9. Warranty and Support

The Streamlight TLR-10 Flex is covered by a Limited Lifetime Warranty. For detailed warranty information, service, or technical support, please visit the official Streamlight website or contact their customer service department.

Official Streamlight Store: Visit the Streamlight Store on Amazon

Related Documents - 69470

Preview Streamlight TLR-7/TLR-8 Series Weapon-Mounted Tactical Flashlight Operating Instructions
Comprehensive operating instructions for the Streamlight TLR-7 and TLR-8 series weapon-mounted tactical flashlights, covering safety, installation, operation, maintenance, and warranty.
Preview Streamlight TLR-7/TLR-8 Series Tactical Weapon Light Operating Instructions Manual
Comprehensive operating instructions, safety warnings, installation, maintenance, and warranty information for the Streamlight TLR-7 and TLR-8 series tactical weapon lights.
Preview Streamlight TLR RM 1 / TLR RM 2 Series Weapon-Mounted Tactical Flashlight Operating Instructions
Detailed operating instructions and safety guidelines for Streamlight TLR RM 1 and TLR RM 2 series tactical flashlights. Covers installation, battery replacement, switch functions, maintenance, warranty, and service information.
Preview Streamlight TLR-1/TLR-2 Series Weapon Light Operating Manual and Instructions
Comprehensive operating instructions, safety warnings, installation, and maintenance guide for Streamlight TLR-1 and TLR-2 series weapon-mounted lights. Includes details on laser zeroing, battery replacement, and warranty.
Preview Streamlight TLR-1 HP Long Range Tactical Light: Specifications, Features, and Compatibility
Comprehensive details on the Streamlight TLR-1 HP Long Range Rail Mounted Tactical Light, including technical specifications, features, accessory compatibility, firearm fitment, warranty information, and battery door operation. Designed for tactical applications.
Preview Streamlight TLR-7 Sub Weapon-Mounted Tactical Flashlight Operating Instructions
Official operating instructions for the Streamlight TLR-7 Sub weapon-mounted tactical flashlight, covering safety, installation, battery replacement, and operation. Includes warnings, maintenance, and warranty information.