1. Introduction
Welcome to your Innovo Medical Deluxe Fingertip Pulse Oximeter and Touchless Digital Forehead Thermometer Bundle. This manual provides essential information for the safe and effective use of both devices. Please read it thoroughly before operation.
2. Important Safety Information
- Consult a medical professional for interpretation of readings. Self-diagnosis based on device readings is not recommended.
- Keep devices out of reach of children and pets.
- Do not use the devices in an MRI or CT environment.
- Do not use the devices on infants or individuals unable to cooperate.
- Avoid exposing devices to extreme temperatures, moisture, or direct sunlight.
- Use only specified batteries.
3. Package Contents
- Innovo Fingertip Pulse Oximeter (Model iP900AP)
- Innovo Touchless Digital Forehead Thermometer
- AAA Batteries (4 total, 2 for each device)
- Lanyard (for Oximeter)
- User Manuals
Image: Contents of the Innovo Medical Deluxe bundle, showing the pulse oximeter, forehead thermometer, two AAA batteries, a lanyard, and the user manual.
4. Product Overview
4.1 Innovo Fingertip Pulse Oximeter (Model iP900AP)
Components
- Lanyard Loop Hole
- Blood Oxygen Saturation Level (%SpO2) Display
- Pulse Rate (PRbpm) Display
- Plethysmograph (Waveform)
- Perfusion Index (PI%)
- Battery Level Indicator
- One-Button Operation
- Finger Opening
Image: Labeled diagram of the Innovo Fingertip Pulse Oximeter, highlighting its various components and display indicators.
4.2 Innovo Touchless Digital Forehead Thermometer
Features
- Patented Blue Light Sensor: Guides to ideal positioning for accurate measurement.
- Temperature Unit Selection: Easily switch between Celsius (°C) and Fahrenheit (°F).
- One-Button Operation for measurement.
Image: A person using the Innovo Touchless Digital Forehead Thermometer, demonstrating the blue light sensor for proper positioning.
Image: Detailed view of the Innovo Touchless Digital Forehead Thermometer's sensor head, including the blue light sensor and the °C/°F button.
5. Setup
5.1 Battery Installation for Innovo Fingertip Pulse Oximeter
- Open the battery cover on the back of the device.
- Insert two AAA batteries according to the polarity indicators (+/-).
- Close the battery cover securely.
Image: The Innovo Fingertip Pulse Oximeter with its battery compartment open, illustrating the correct placement for two AAA batteries.
5.2 Battery Installation for Innovo Touchless Digital Forehead Thermometer
- Locate the battery compartment, usually on the handle.
- Insert two AAA batteries, observing the correct polarity.
- Close the battery cover.
6. Operating Instructions
6.1 Using the Innovo Fingertip Pulse Oximeter
- Open the clamp and place one finger into the rubber opening of the oximeter, ensuring the finger is fully inserted.
- Release the clamp.
- Press the power button once to turn on the oximeter.
- Keep your hand still. Readings for SpO2, Pulse Rate, and Perfusion Index will appear on the display within a few seconds.
- The device will automatically power off after 8 seconds of inactivity.
Image: The Innovo Fingertip Pulse Oximeter actively measuring on a finger, showing a clear display of blood oxygen saturation and pulse rate.
6.2 Using the Innovo Touchless Digital Forehead Thermometer
- Power On: Press the Power/Measure button.
- Select Measurement Unit (°F/°C): If needed, press the °C/°F button to switch between Fahrenheit and Celsius.
- Positioning: Point the thermometer at the center of the forehead, maintaining a distance of approximately 2 inches (5 cm), until "Good" registers on the display.
- Take Measurement: Press the Power/Measure button to take the temperature reading.
- Exit Data Display: Press the Power/Measure button again to exit the data display. The thermometer is now ready for the next measurement.
Image: A visual guide demonstrating the five steps to operate the Innovo Touchless Digital Forehead Thermometer, from powering on to taking a measurement.
7. Oximeter Settings and Alarm Parameters
The Innovo iP900AP Pulse Oximeter allows you to customize settings such as alarm, beep sound, and screen brightness. You can also reset the device to factory defaults.
7.1 Accessing Settings
- With the oximeter off or displaying "Finger Out", press and hold the power button to enter the 'Settings' menu.
7.2 Navigating and Adjusting Settings
- Alarm (Alm Setup): Press the power button to select 'Alm Setup'. Press and hold to enter the alarm setup menu. Here you can set upper and lower limits for SpO2 and Pulse Rate.
- Beep: Press the power button to select 'Beep'. Press and hold to toggle the pulse beeping sound 'On' or 'Off'.
- Brightness: Press the power button to select 'Brightness'. Press and hold to adjust the screen brightness level from '1' to '10' (Level 10 is the brightest).
- Reset: Press the power button to select 'Reset'. Press and hold until 'Yes' appears, then press the power button again to confirm and reset to factory default settings.
- Exit: Press the power button to select 'Exit'. Press and hold to return to the previous menu or exit settings.
Video: This official Innovo Medical video demonstrates how to navigate and change the settings of the Innovo iP900AP Fingertip Pulse Oximeter, including alarm setup, beep sound, brightness adjustment, and factory reset.
7.3 Setting Alarm Parameters
When the SpO2 or pulse rate exceeds a pre-defined range, an alarm will be triggered, and the readings will begin to flash. You can define the upper and lower limits for both SpO2 and pulse rate to activate this alarm.
- In the 'Alm Setup' menu, use the power button to select the parameter you wish to adjust (e.g., SpO2 Alm Hi, SpO2 Alm Lo, PR Alm Hi, PR Alm Lo).
- Press and hold the power button to increase or decrease the value.
- Once values are set, select 'Exit' and press and hold the power button to save and return to the main settings menu.
8. Maintenance
8.1 Care and Cleaning
- Cleaning: Wipe the device surfaces with a soft cloth dampened with a mild disinfectant (e.g., 70% isopropyl alcohol). Do not immerse the device in liquid.
- Storage: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if the devices will not be used for an extended period.
- Disposal: Dispose of batteries and devices according to local regulations.
9. Troubleshooting
9.1 Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| No display/Device won't turn on | Batteries are dead or incorrectly inserted. | Replace batteries or ensure correct polarity. |
| Inaccurate Oximeter readings | Finger not fully inserted, excessive movement, cold fingers, nail polish. | Reinsert finger, remain still, warm hands, remove nail polish. |
| Thermometer displays "ERR" | Incorrect distance from forehead, sensor obstruction. | Adjust distance to 2 inches, ensure sensor is clean and unobstructed. |
| Alarm sounds continuously (Oximeter) | SpO2 or Pulse Rate outside set limits. | Check patient condition, adjust alarm limits if necessary (refer to Settings section). |
10. Specifications
10.1 Innovo Fingertip Pulse Oximeter
- Measuring Range: SpO2: 70-100%, Pulse Rate: 30-250 bpm
- Power: 2 x AAA batteries (included)
- Display: OLED
- Features: Plethysmograph, Perfusion Index, Adjustable Brightness, Auditory Alarm, Auditory Beeps.
10.2 Innovo Touchless Digital Forehead Thermometer
- Technology: Latest 2022 infrared technology.
- Accuracy: Capable of detecting temperature differences of up to 0.01°.
- Features: Patented Blue Light Sensor, Distance Sensor.
- Power: 2 x AAA batteries (included)
11. Warranty and Support
11.1 Warranty Information
Innovo Medical products are designed for reliability and accuracy. For specific warranty details, please refer to the warranty card included in your product packaging or visit the official Innovo Medical website.
11.2 Customer Support
For technical assistance, troubleshooting, or product inquiries, please contact Innovo Medical customer support.
