Bosch HT6ET60 Heating Element Instruction Manual

1. Introduction

This manual provides essential information for the safe and correct handling, installation, and maintenance of your Bosch HT6ET60 / 60.16175.001 heating element. Please read these instructions carefully before proceeding with any installation or service to ensure proper function and safety.

2. Safety Instructions

Warning: Electrical work should only be performed by qualified personnel. Failure to follow these safety instructions may result in electric shock, fire, or personal injury.

• Always disconnect the appliance from the main power supply before attempting any installation, maintenance, or repair.
• Ensure that the replacement part is compatible with your appliance model.
• Wear appropriate personal protective equipment (PPE), such as gloves and eye protection.
• Handle the heating element carefully to avoid damage to its delicate components.
• Do not operate the appliance if the heating element or any other component is damaged.

3. Product Overview

The Bosch HT6ET60 / 60.16175.001 is a replacement heating element designed for vitroceramic cooktops. It is an essential component responsible for generating heat to cook food. This element features a dual-zone heating capability, providing flexibility for different pot sizes.

Figure 1: Bosch HT6ET60 Vitroceramic Heating Element. This image shows the circular heating element with its electrical terminals and the heating coils visible through the ceramic insulation.

4. Compatibility

This heating element is compatible with the following models:

• Bosch HT6ET60
• BALAY 3EB765LQ/02

Always verify the part number on your existing heating element or consult your appliance's service manual to confirm compatibility before purchasing and installing this replacement part.

5. Installation (Setup)

Installation of a heating element in a ceramic cooktop requires technical expertise and should ideally be performed by a certified technician. The following steps are for informational purposes only and do not substitute professional service.

1. Disconnect Power: Ensure the cooktop is completely disconnected from the electrical supply at the circuit breaker.
2. Access Cooktop: Carefully remove the cooktop from its counter opening or lift the glass top, depending on your model's design. Refer to your appliance's specific service manual for detailed disassembly instructions.
3. Locate Element: Identify the faulty heating element.
4. Disconnect Wiring: Take a photograph of the existing wiring connections before disconnecting them. Carefully detach the wires from the terminals of the old heating element.
5. Remove Old Element: Unfasten any screws or clips holding the old element in place and remove it.
6. Install New Element: Place the new Bosch HT6ET60 / 60.16175.001 heating element into position. Secure it with the original fasteners.
7. Connect Wiring: Reconnect the wires to the new element's terminals, ensuring they match the photograph taken earlier. Double-check all connections for security.
8. Reassemble Cooktop: Carefully reassemble the cooktop, ensuring all components are correctly seated and secured.
9. Test Functionality: Restore power to the cooktop and test the new heating element's functionality. Observe for proper heating and any unusual behavior.

If you are unsure about any step, contact a qualified appliance repair technician.

6. Operation

As a component, the heating element operates automatically when the associated cooktop zone is activated. Ensure that the cooktop's controls are functioning correctly to regulate the heat output of the element. Always use cookware appropriate for vitroceramic surfaces to ensure efficient heat transfer and prevent damage to the cooktop.

7. Maintenance

Proper maintenance of your cooktop will extend the life of its components, including the heating element.

• Cleaning: Regularly clean the vitroceramic surface according to your cooktop manufacturer's instructions. Avoid abrasive cleaners that can scratch the surface.
• Spills: Clean up spills immediately, especially sugary liquids, to prevent them from baking onto the surface and potentially affecting the element's performance or the cooktop's integrity.
• Inspection: Periodically inspect the cooktop surface for cracks or damage. A damaged surface can expose the heating element and create a safety hazard.

8. Troubleshooting

If your cooktop is not heating correctly after replacing the element, consider the following:

• No Heat: Check if the circuit breaker has tripped. Verify all electrical connections to the heating element are secure and correctly wired.
• Uneven Heating: Ensure the element is seated correctly and not warped. This is less common for new elements but can indicate an issue with the cooktop's control system.
• Element Not Activating: The issue might be with the cooktop's control switch or thermostat, not the heating element itself.

For persistent issues, consult a qualified appliance repair technician.

9. Specifications

10. Warranty and Support

For warranty information regarding this replacement part, please refer to the terms and conditions provided by your original seller or the manufacturer, Bosch. Keep your proof of purchase for any warranty claims.

For technical support or service, please contact a qualified appliance repair professional or the Bosch customer service department in your region.