Jensen JWM10A

Jensen JWM10A Wallmount Stereo User Manual

Model: JWM10A

Introduction

Thank you for purchasing the Jensen JWM10A Wallmount Stereo. This manual provides detailed instructions for the installation, operation, and maintenance of your new stereo system. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage.

Product Features

Jensen JWM10A Product Features Overview

Image: Overview of the Jensen JWM10A Wallmount Stereo highlighting its key product features and "App Ready" capability.

Safety Information

Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in injury or damage to the unit.

Setup and Installation

The JWM10A is designed for wallmount installation. Ensure you have adequate space and access to a 12V DC power source.

Mounting Considerations:

Wiring:

Jensen JWM10A Dimensions and Specifications

Image: Technical drawing showing the dimensions and mounting points of the Jensen JWM10A stereo, along with a table of general specifications.

Operation

This section details the various functions and controls of your JWM10A stereo.

Jensen JWM10A Front Panel Controls

Image: Front panel of the Jensen JWM10A stereo, showing all buttons, the LCD display, and input ports.

Basic Controls:

Radio Operation (AM/FM):

Bluetooth Operation:

Auxiliary Input (AUX):

App Control (jControl):

Alarm Clock and Sleep Timer:

Troubleshooting

If you experience issues with your JWM10A stereo, please consult the following common problems and solutions before contacting support.

ProblemPossible Cause / Solution
No power / Unit does not turn on.
  • Check power connections (12V DC, ground).
  • Verify the vehicle's fuse or power source.
  • Ensure the POWER button is pressed firmly.
No sound from speakers.
  • Check speaker wire connections.
  • Ensure volume is turned up.
  • Verify correct audio source is selected (AM/FM, Bluetooth, AUX).
  • Check Zone A/B settings to ensure desired zones are active.
Poor radio reception.
  • Check antenna connection.
  • Ensure antenna is fully extended (if applicable).
  • Move to an area with better signal strength.
Bluetooth pairing issues / Bluetooth not working.
  • Ensure the JWM10A is in Bluetooth mode and pairing mode (press PAIR button).
  • Make sure Bluetooth is enabled on your mobile device.
  • Move your device closer to the stereo (within 33 feet).
  • Try deleting "JWM10A" from your device's Bluetooth history and re-pairing.
  • Perform a factory reset on the stereo if available (consult full manual for procedure, as the reset button might be a power disconnect).
  • Restart both the stereo and your Bluetooth device.
App control (jControl) not working.
  • Ensure your device is successfully paired via Bluetooth to the JWM10A.
  • Check if the jControl app is updated to the latest version.
  • Restart the app and the stereo.

Specifications

FeatureDetail
BrandJensen
Model NumberJWM10A
Product Dimensions10.43" W x 2.76" H x 3.5" D (3.5 x 10.43 x 2.76 inches)
Item Weight1.46 pounds
Connectivity TechnologyBluetooth
Controller TypeAndroid (via jControl app)
Special FeatureBuilt-In Bluetooth
Compatible DevicesSmartphone, Speaker
Connector Type3.5mm Jack, RCA
Audio Output ModeStereo
Surround Sound Channel Configuration4.0
ColorBlack
Power Supply12V DC
Programmable Presets30 (18 FM, 12 AM)
Speaker Outputs4 (2 zones)

Warranty and Support

This product is covered by a limited warranty. For detailed warranty information, please refer to the warranty card included with your purchase or visit the manufacturer's official website.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Jensen customer support. Contact information can typically be found on the manufacturer's website or on the product packaging.

Manufacturer: ASA Electronics

Website: www.asaelectronics.com

Related Documents - JWM10A

Preview JENSEN JWM10A Quick Reference Guide: Operation and Features
Concise guide to operating the JENSEN JWM10A audio receiver, covering basic functions, app control, AM/FM tuning, Bluetooth pairing, and clock/alarm settings.
Preview Jensen JWM1A Mobile Audio System: Owner's Manual and Operation Guide
This comprehensive owner's manual provides detailed instructions for the Jensen JWM1A mobile audio system. It covers installation, basic and advanced operation including tuner, Bluetooth, and app control, along with essential specifications and safety precautions.
Preview Jensen JWM10A Mobile Audio System Owner's Manual
Comprehensive owner's manual for the Jensen JWM10A mobile audio system, covering installation, operation, Bluetooth features, app control, and specifications.
Preview Jensen JWM10A Mobile Audio System Owner's Manual
Comprehensive owner's manual for the Jensen JWM10A mobile audio system, covering installation, operation, features, Bluetooth connectivity, app control, and specifications. Includes wiring diagrams and basic operation guides.
Preview Jensen JMC-1250 Bluetooth 3-Speed Stereo Turntable System User Manual
Comprehensive user manual for the Jensen JMC-1250 Bluetooth 3-Speed Stereo Turntable Music System with Dual Cassette Deck. Learn about setup, operation, features, safety instructions, and troubleshooting.
Preview JENSEN MS3A Marine Audio Receiver Owner's Manual: Installation & Operation Guide
Comprehensive owner's manual for the JENSEN MS3A marine audio receiver. Learn about installation, features, operation, Bluetooth, USB, and troubleshooting from ASA Electronics Corporation.