Tiny Love BN113BOHO
Tiny Love Boho Chic 2-in-1 Rocker Instruction Manual
Model: BN113BOHO | Brand: Tiny Love
Introduction
The Tiny Love Boho Chic 2-in-1 Rocker is designed to provide comfort and entertainment for your baby, transitioning seamlessly between a gentle rocking seat and a stable stationary seat. Its minimalist design and earth-toned colors blend well with various home decors. This manual provides essential information for safe assembly, operation, and maintenance of your rocker.
Important Safety Information
Please read all instructions before assembly and use of the product. Keep these instructions for future reference. Failure to follow these warnings and instructions could result in serious injury or death.
- Never leave child unattended.
- Always use the restraint system.
- Never use this product on an elevated surface (e.g., a table).
- This product is not intended for prolonged periods of sleep. Never let babies sleep in rockers, bouncers, or swings.
- Do not move or lift the product with the child inside.
- Discontinue use of the product when the child can sit up unaided or attempts to climb out.
- Maximum weight recommendation: 20 lbs (9 kg).
- Regularly inspect the product for loose parts, damaged components, or signs of wear. Do not use if any part is broken or missing.
Components
Ensure all parts are present before beginning assembly:
- Rocker Frame (pre-assembled)
- Fabric Seat Cover with Inlay
- Removable Toy Arch
- Plush Koala Toy
- Wooden Rattle with Crinkly Leaves Toy

Figure 1: All components of the Tiny Love Boho Chic 2-in-1 Rocker.
Setup
The Tiny Love Boho Chic 2-in-1 Rocker is designed for quick and easy setup. Most of the frame comes pre-assembled.
- Unfold the Frame: Carefully unfold the rocker frame until it locks securely into place. Ensure all locking mechanisms are engaged.
- Attach Fabric Seat: The fabric seat cover is typically pre-attached. If not, slide the fabric over the frame, ensuring all elastic loops and zippers are properly secured.
- Insert Newborn Inlay: Place the cozy newborn inlay into the seat, aligning it with the harness straps.
- Attach Toy Arch: Insert the ends of the removable toy arch into the designated slots on the side of the rocker frame until they click into place.

Figure 2: Attaching the removable toy arch.
- Attach Toys: Hang the plush koala and wooden rattle with crinkly leaves onto the loops on the toy arch.
The assembly process is typically very fast, often taking less than 5 minutes.
Operating Modes
The Boho Chic 2-in-1 Rocker offers two primary modes for your baby's comfort and engagement:
1. Rocking Mode
In rocking mode, the rocker provides a gentle, soothing motion that can help calm and relax your baby. This mode is ideal for moments when your baby needs comfort or is winding down.

Figure 3: Baby enjoying the rocking mode.
2. Stationary Mode
To switch to stationary mode, locate the pegs or locking mechanism at the base of the rocker. Engage these to prevent the rocking motion, providing a stable seat for playtime or feeding. This mode allows your baby to focus on the interactive toys or observe their surroundings without movement.

Figure 4: The 2-in-1 functionality, showing both stationary and rocking modes.
Adjustments
Recline Positions
The rocker features three recline positions to ensure optimal comfort for your baby at different stages. To adjust the recline, locate the adjustment mechanism (typically a button or lever) at the back of the seat. Press or lift the mechanism and gently move the seat to the desired position until it locks securely.

Figure 5: Adjusting the recline position.

Figure 6: Detail of the recline adjustment mechanism.
Harness System
The rocker is equipped with a secure harness system to keep your baby safely in place. Adjust the straps to fit snugly around your baby, ensuring they are not too tight or too loose. Always ensure the harness is properly fastened before placing your baby in the rocker.

Figure 7: The secure harness system and cozy inlay.
Interactive Toy Arch
The removable toy arch provides engaging entertainment for your baby. It includes a plush koala doll and a wooden rattle with crinkly leaves, designed to stimulate your baby's cognition, emotions, and senses.
- Attachment/Removal: The toy arch can be easily attached or removed by inserting or pulling it from the side slots. This allows for easy access to your baby and versatility in use.
- Toy Interaction: The toys are designed to be easily grasped by little hands and may produce sounds when shaken, encouraging sensory exploration.

Figure 8: Baby interacting with the developmental toys.
Care and Maintenance
Proper care ensures the longevity and hygiene of your rocker:
- Fabric Cover: The fabric cover is designed to be easily removed for cleaning. Unzip the cover and machine wash it according to the care label instructions (typically cold water, gentle cycle). Allow to air dry completely before reattaching.

Figure 9: Fabric cover is easily removable for cleaning.
- Frame: Wipe the frame and plastic components with a damp cloth and mild soap. Do not use abrasive cleaners.
- Toys: The plush koala can be surface washed. The wooden rattle can be wiped clean with a damp cloth.
Storage and Portability
The Boho Chic 2-in-1 Rocker is designed to fold flat for compact storage and easy portability, making it convenient for travel or moving around the house.
- Folding: Locate the folding mechanisms on the frame (refer to the assembly instructions for specific points). Release these mechanisms and gently fold the rocker flat.
- Transport: Once folded, the rocker is lightweight and easy to carry.

Figure 10: The rocker folds flat for compact storage and portability.
Troubleshooting
If you encounter any issues with your Tiny Love Boho Chic 2-in-1 Rocker, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Rocker does not rock smoothly. | Stationary pegs are engaged or surface is uneven. | Ensure stationary pegs are disengaged. Place the rocker on a flat, even surface. |
| Toy arch is loose or falls off. | Not properly inserted into slots. | Push the toy arch firmly into the slots until you hear a click, indicating it is securely fastened. |
| Recline position does not lock. | Adjustment mechanism not fully engaged. | Ensure the recline adjustment mechanism is fully pressed/lifted and the seat is moved until it clicks into a locked position. |
If the problem persists, please contact Tiny Love customer support.
Specifications
- Product Dimensions: 28.5 x 16.75 x 18.5 inches
- Model Number: BN113BOHO
- Maximum Weight Recommendation: 20 Pounds (9 kg)
- Material Composition: Olefin Foam, Polyester Fiber Batting, Polyurethane Foam Pad, Polyester Fiber, Polyester Film, ABS, Steel
- Batteries Required: No
- Portability: Yes
- Item Weight: 7.12 pounds (3.23 kg)
Warranty and Support
For warranty information, product registration, or further assistance, please visit the official Tiny Love website or contact their customer support. Keep your purchase receipt as proof of purchase.
Tiny Love Official Website: www.tinylove.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.


