Introduction
This instruction manual provides essential information for the safe and efficient operation, installation, and maintenance of your SMEG LSIA147 Built-in Washer Dryer. Please read this manual thoroughly before using the appliance and keep it for future reference. Proper use and care will ensure optimal performance and extend the lifespan of your appliance.
Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Electrical Safety: Ensure the appliance is connected to a properly grounded outlet. Do not use extension cords or adapters. Disconnect power before any maintenance or cleaning.
- Water Connections: Ensure all water inlet and drain hoses are securely connected to prevent leaks.
- Children and Vulnerable Persons: This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- Flammable Materials: Do not wash or dry items that have been soiled with flammable substances such as cooking oil, gasoline, or dry-cleaning solvents.
- Installation: The appliance must be installed by a qualified person in accordance with local regulations.
Setup and Installation
The SMEG LSIA147 is designed as a built-in appliance. Proper installation is crucial for its performance and safety.
- Unpacking: Carefully remove all packaging materials. Check for any damage during transit.
- Location: Install the appliance in a dry, well-ventilated area. Ensure sufficient space for ventilation and maintenance.
- Leveling: Adjust the appliance's feet to ensure it is perfectly level. This prevents excessive vibration and noise during operation.
- Water Supply: Connect the water inlet hose to a cold water tap with a 3/4" thread. Ensure the connection is tight to prevent leaks.
- Drainage: Securely connect the drain hose to a suitable drain pipe or sink. Ensure the hose is not kinked or obstructed.
- Electrical Connection: Plug the appliance into a grounded electrical outlet. Do not use adapters or extension cords.
- Cabinet Integration: Follow the provided dimensions for integrating the appliance into your kitchen cabinetry. Professional installation is recommended for built-in appliances.
Figure 1: Installation dimensions for the SMEG LSIA147 built-in washer dryer. This diagram illustrates the minimum required cabinet dimensions for proper integration, including width, height, and depth, along with specific measurements for the appliance's placement within the cabinet structure. All measurements are in millimeters.
Operating Instructions
The SMEG LSIA147 features electronic controls and 15 programs for various washing and drying needs.
Figure 2: Front view of the SMEG LSIA147 built-in washer dryer, partially concealed by an open cabinet door. The control panel with electronic display and program selector knob is visible at the top, along with the detergent dispenser and the main loading door.
- Loading Laundry: Open the front loading door and place laundry inside the drum. Do not overload the appliance; the maximum washing capacity is 7 kg and drying capacity is 4 kg.
- Detergent and Additives: Add the appropriate amount of detergent and any fabric softeners or other additives to the dispenser compartments.
- Program Selection: Use the program selector knob on the electronic control panel to choose one of the 15 available wash/dry programs. Refer to the appliance's program chart for details on each cycle.
- Customizing Settings: Adjust settings such as temperature, spin speed (up to 1400 RPM), and delay start (up to 24 hours) using the control panel buttons.
- Starting the Cycle: Press the Start/Pause button to begin the selected program.
- End of Cycle: The appliance will signal when the cycle is complete. Open the door and remove the laundry.
Maintenance
Regular maintenance ensures the longevity and efficiency of your washer dryer.
- Cleaning the Exterior: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Detergent Dispenser: Periodically remove and clean the detergent dispenser drawer to prevent residue buildup.
- Drum Cleaning: Run a maintenance wash cycle (e.g., a hot wash with no laundry and a descaling agent) occasionally to clean the drum.
- Filter Cleaning: Regularly check and clean the lint filter (for drying cycles) and the drain pump filter to ensure proper drainage and drying performance. Refer to the appliance diagrams for filter locations.
- Door Seal: Wipe the door seal after each use to remove any lint or moisture, preventing mold and odors.
Troubleshooting
Before contacting customer service, consult the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not start | No power supply; Door not closed properly; Program not selected. | Check power connection; Ensure door is securely latched; Select a program and press Start. |
| Excessive vibration/noise | Appliance not level; Transport bolts not removed; Overloaded drum. | Adjust leveling feet; Remove transport bolts (if applicable); Reduce laundry load. |
| Water not draining | Drain hose kinked or blocked; Drain pump filter clogged. | Check and straighten drain hose; Clean the drain pump filter. |
| Poor washing/drying results | Incorrect program/temperature; Overloading; Insufficient detergent; Clogged lint filter. | Select appropriate program; Reduce load; Use correct detergent amount; Clean lint filter. |
If the problem persists after attempting these solutions, please contact SMEG customer support.
Specifications
| Brand | SMEG |
| Model Number | LSIA147 |
| Installation Method | Built-in appliance |
| Access Location | Front-loader |
| Washing Capacity | 7 Kilograms |
| Drying Capacity | 4 Kilograms |
| Maximum Rotation Speed | 1400 RPM |
| Number of Programs | 15 |
| Delayed Start | Up to 24 hours |
| Noise Level | 72 dB |
| Energy Compliance | Energy Star |
| GTIN (EAN) | 8017709302733 |
Warranty and Support
For warranty information, terms, and conditions, please refer to the documentation provided with your purchase or visit the official SMEG website. For technical support, service requests, or to order spare parts, please contact SMEG customer service directly. Have your model number (LSIA147) and purchase date ready when contacting support.
