HIKMICRO E1L Thermal Imaging Camera User Manual

1. Introduction

The HIKMICRO E1L Thermal Imaging Camera is a portable, handheld infrared thermal imager designed for various applications including home inspections, facility maintenance, HVAC troubleshooting, and electrical/mechanical system analysis. It features a 160 x 120 IR resolution sensor, 25Hz refresh rate, and a wide temperature measurement range.

The HIKMICRO E1L Thermal Imaging Camera, showcasing its compact design and included 8GB MicroSD card.

2. Setup

2.1 What's in the Box

• E1L Thermal Imager x 1

A visual representation of the items included in the HIKMICRO E1L product package.

2.2 Initial Charging and Power On

The HIKMICRO E1L comes with a built-in Li-Ion rechargeable battery. Ensure the device is fully charged before first use for optimal performance. The device can operate for up to 8 hours on a full charge.

The HIKMICRO E1L offers up to 8 hours of continuous operation on a single charge.

To power on the device, press and hold the power button located on the unit. To power off, repeat the same action.

2.3 Inserting/Removing MicroSD Card

The device supports MicroSD cards for storing thermal images. An 8GB MicroSD card is typically included. Locate the MicroSD card slot, usually protected by a rubber flap, and gently insert or remove the card as needed.

3. Operating Instructions

The HIKMICRO E1L is designed for intuitive operation, providing clear thermal images for various diagnostic tasks.

Overview of the HIKMICRO E1L's key features, including 160x120 IR resolution, <0.04°C thermal sensitivity, 25Hz image frequency, and -4°F to 1022°F temperature range.

3.1 High Image Quality and Fast Refresh Rate

The E1L camera features a 160 x 120 resolution thermal sensor, delivering high image quality and a fast 25Hz frame rate for smooth operation and clear thermal visualization.

The HIKMICRO E1L provides high-resolution thermal images with excellent sensitivity, making it easy to spot subtle heat differences.

Experience constant images and smooth operation with the 25Hz fast image frequency of the HIKMICRO E1L.

3.2 Setting Measurement Presets

The E1L allows you to set multiple temperature spots for fast and accurate measurements:

• Center Spot: Displays the temperature at the center of the screen.
• Auto-Hot Spot: Automatically identifies and displays the hottest temperature in the view.
• Auto-Cold Spot: Automatically identifies and displays the coldest temperature in the view.

To access these settings, press the power button to display the menu bar. Navigate to the 'Rule' page and select your desired spot measurements. Press the power button again to switch on/off, or the return button to exit.

The HIKMICRO E1L can pinpoint temperature anomalies with Center, Hot, and Cold spot tracking.

3.3 Enabling Laser Pointer

The built-in laser pointer helps to accurately determine the location of problems by indicating the center point on the actual object.

1. Press the power button to show the menu bar.
2. Select and enable the laser pointer option.
3. In the live view interface, hold the trigger to turn on the laser pointer. Release the trigger to turn it off.

The laser pointer assists in precisely locating the center point of the thermal measurement on the target object.

3.4 Changing Color Palettes

The E1L offers multiple color palettes to visualize thermal data, allowing you to choose the ideal scale for your specific job:

• White Hot
• Black Hot
• Rainbow
• Ironbow

To change the palette:

1. Press the power button to show the menu bar.
2. Select the 'Palettes' function.
3. Navigate through the 4 color palettes.
4. Press the return button to exit.

Choose from various color palettes like Rainbow, Ironbow, Black Hot, and White Hot to best visualize temperature differences.

3.5 Switching Temperature Measurement Range

The device supports different temperature measurement ranges to suit various applications:

• -20°C to 150°C (-4°F to 302°F)
• 100°C to 550°C (212°F to 1022°F)
• Auto Switch (automatically adjusts based on object temperature)

To switch the range:

1. Press the power button to show the menu bar.
2. Select the 'Meas.Range' function.
3. Choose from the 3 temperature measurement ranges.
4. Press the return button to exit.

3.6 Adjusting Emissivity

Emissivity is a measure of an object's ability to emit infrared energy. Adjusting this setting ensures accurate temperature readings for different materials.

The emissivity setting can be adjusted to ensure accurate temperature measurements for various surfaces.

3.7 Capturing Thermal Images

To capture thermal images:

1. Pull the trigger to capture thermal images.
2. Press the power button or pull the trigger again to save the picture. Press the return button to cancel it.

3.8 Exporting to Analyzer Software

Thermal images can be exported to the HIKMICRO Analyzer software for detailed analysis and reporting.

1. Connect the device to a PC via USB cable.
2. Select and copy the thermal images to your PC.
3. Import thermal images into HIKMICRO Analyzer for analysis.

The HIKMICRO Analyzer software provides advanced tools for analyzing captured thermal images.

3.9 Official Product Video: How to Use HIKMICRO E1L Thermal Imager

This official video from HIKMICRO Direct demonstrates the key operational features of the HIKMICRO E1L Thermal Imager, including setting measurement presets, enabling the laser pointer, changing color palettes, switching temperature ranges, capturing images, and exporting data for analysis.

4. Maintenance

4.1 Cleaning Instructions

To maintain the device's performance and longevity, wipe it clean with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the lens or casing.

The HIKMICRO E1L is designed to be rugged and reliable, suitable for various working environments.

4.2 Battery Care

To prolong battery life, avoid fully discharging the battery frequently. Store the device in a cool, dry place when not in use for extended periods.

5. Troubleshooting

5.1 Common Issues and Solutions

• Device not turning on: Ensure the battery is charged. Connect to a power source and try again.
• Image quality issues: Check the lens for dirt or smudges and clean if necessary. Ensure correct emissivity settings for the material being inspected.
• Battery not holding charge: This could indicate a worn battery. Contact customer support for assistance.
• Inaccurate temperature readings: Verify the correct temperature measurement range is selected and emissivity is properly set.

For more complex issues, refer to the official HIKMICRO support resources or contact their customer service.

6. Specifications

6.1 Clear Thermal Image Distance (D:O Ratio)

The D:O (Distance to Spot) ratio of 2.8:1 indicates the measurement area size at a given distance.

7. Warranty and Support

HIKMICRO offers comprehensive support for the E1L Thermal Imaging Camera:

• Device Warranty: 3 Years for the Entire Device.
• Sensor Warranty: 10 Years for the Sensor.
• Software: Lifetime Firmware Updates and Technical Support are included.
• Customer Service: US-based customer support team offers local service, maintenance, and recalibration.

HIKMICRO provides hassle-free US local service for maintenance and support.

For additional information or to contact support, please visit the HIKMICRO Store on Amazon.