1. Introduction
Congratulations on your purchase of the SVS PB-1000 Pro Ported Subwoofer. This manual provides essential information for setting up, operating, and maintaining your new subwoofer to ensure optimal performance and longevity. The PB-1000 Pro is engineered to deliver powerful, accurate, and deep bass, enhancing your home audio experience for both music and movies.
Figure 1: The SVS PB-1000 Pro Ported Subwoofer, showcasing its front-firing driver and dual bass ports, finished in premium black ash.
2. Safety Information
Please read all safety instructions before operating your SVS PB-1000 Pro subwoofer. Retain this manual for future reference.
- Power Source: Connect the subwoofer only to a power outlet of the type described in the operating instructions or as marked on the unit.
- Ventilation: Ensure adequate ventilation around the subwoofer. Do not block any ventilation openings.
- Water and Moisture: Do not expose the subwoofer to rain or moisture. Do not place objects filled with liquids, such as vases, on the subwoofer.
- Heat: Do not place the subwoofer near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Cleaning: Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners.
- Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
- Placement: Place the subwoofer on a stable, level surface to prevent tipping.
3. What's in the Box
Upon unpacking your SVS PB-1000 Pro, please verify that all components are present:
- SVS PB-1000 Pro Ported Subwoofer
- Detachable Power Cord
- Quick Start Guide
- Grille (pre-installed or separate)
If any items are missing or damaged, please contact SVS customer support immediately.
4. Setup
4.1 Subwoofer Placement
The SVS PB-1000 Pro is designed as a floor-standing unit. Optimal placement can significantly impact bass performance. Experiment with different locations in your room to find the best sound. Common placement strategies include:
- Front of Room: Near the front speakers, often in a corner or along the front wall. Corner placement can enhance bass output.
- Mid-Wall: Along a side or rear wall.
- "Subwoofer Crawl": Place the subwoofer in your primary listening position, then crawl around the room to find where the bass sounds best. This is where the subwoofer should be placed.
Figure 2: The PB-1000 Pro integrated into a home audio system, demonstrating a typical floor-standing placement.
4.2 Connections
The PB-1000 Pro uses RCA connectivity. Ensure your AV receiver or pre-amplifier has a dedicated subwoofer output (LFE/Subwoofer Out).
- Power Off: Ensure all audio components, including the subwoofer and your receiver, are powered off before making any connections.
- RCA Cable: Connect one end of a high-quality RCA interconnect cable to the LFE/Subwoofer Output on your AV receiver.
- Subwoofer Input: Connect the other end of the RCA cable to the "LFE" or "LINE IN (Left/Mono)" input on the back of your PB-1000 Pro subwoofer.
- Power Cord: Connect the detachable power cord to the subwoofer's power inlet, then plug the other end into a grounded AC outlet.
4.3 Initial Power On and Settings
After making all connections:
- Power on your AV receiver first, then power on the SVS PB-1000 Pro.
- Set the subwoofer's volume (gain) to a moderate level initially.
- If your receiver has an auto-calibration feature (e.g., Audyssey, MCACC, YPAO), run it now. This will automatically set the subwoofer's level, crossover frequency, and phase.
- If manual setup is required, refer to your AV receiver's manual for speaker setup instructions. Typically, you will set your main speakers to "Small" and the subwoofer to "On" or "Yes".
5. Operating Your Subwoofer
5.1 Basic Operation
Once connected and initially configured, your PB-1000 Pro subwoofer will automatically power on when an audio signal is detected and enter standby mode when no signal is present for a period. The front LED indicator will show the power status.
5.2 SVS Subwoofer DSP Smartphone App
The SVS Subwoofer DSP Smartphone App provides advanced control and customization options for your PB-1000 Pro. It is available for both iOS and Android devices.
- Download the App: Search for "SVS" in your device's app store and download the official SVS Subwoofer DSP app.
- Connect: Ensure your smartphone's Bluetooth is enabled. Open the SVS app, and it will automatically search for and connect to your PB-1000 Pro subwoofer.
- Controls: The app allows you to control various parameters, including:
- Volume: Adjust the overall output level of the subwoofer.
- Low Pass Filter (Crossover): Fine-tune the upper frequency limit of the subwoofer.
- Phase: Adjust the phase to ensure seamless blending with your main speakers.
- Parametric EQ: Create custom equalization curves to address room acoustics and optimize performance.
- Room Gain Compensation: Adjust for excessive bass output in smaller rooms.
- Presets: Save and recall custom settings for different listening modes (e.g., Music, Movie, Custom).
Figure 3: The SVS PB-1000 Pro alongside a smartphone running the SVS DSP app, illustrating the ease of control.
Figure 4: A close-up of the SVS app's volume control, showing the intuitive interface for adjusting output levels.
Figure 5: Multiple devices showcasing the SVS app and website, highlighting the integrated ecosystem for product control and information.
6. Maintenance
The SVS PB-1000 Pro is designed for long-term reliability with minimal maintenance.
- Cleaning: Dust the cabinet and grille regularly with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents.
- Grille: The fabric grille protects the driver. Keep it attached during normal use. If removed for critical listening, handle it carefully to avoid damage.
- Ventilation: Ensure the amplifier's heat sink and ports remain clear of obstructions to allow for proper cooling.
7. Troubleshooting
If you experience issues with your PB-1000 Pro, consult the following table before contacting support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from subwoofer |
|
|
| Distorted or boomy bass |
|
|
| Humming or buzzing noise |
|
|
8. Specifications
Key specifications for the SVS PB-1000 Pro Ported Subwoofer:
- Brand: SVS
- Model: PB-1000 Pro
- Speaker Maximum Output Power: 820 Watts (Peak)
- Connectivity Technology: RCA
- Audio Output Mode: Surround
- Mounting Type: Floor Standing
- Amplifier: Sledge STA-325D (325 Watts RMS, 820+ Watts Peak)
- Driver: High-Excursion 12-inch SVS Subwoofer Driver
- DSP: 50MHz Analog Devices Audio DSP
- Cabinet Design: Acoustically Tuned Dual Port
9. Warranty and Support
SVS products are built to the highest standards of quality and reliability. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official SVS website.
For technical support, troubleshooting assistance, or service inquiries, please contact SVS customer support through their official website or the contact information provided in your product documentation. When contacting support, please have your product model and serial number ready.
SVS Official Website: www.svsound.com
