BESTTEN DD2-L-MB

Download PDF
Contents

User Manual for BESTTEN Digital Electronic Keypad Deadbolt Door Lever

Model: DD2-L-MB

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your BESTTEN Matte Black Finish Premium Digital Electronic Keypad Deadbolt Door Lever, Model DD2-L-MB. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

The BESTTEN DD2-L-MB is designed to provide secure and convenient keyless entry, combining a traditional door lever with a modern digital keypad deadbolt. It features a durable alloy steel construction and a matte black finish.

Product Overview

BESTTEN Digital Electronic Keypad Deadbolt Door Lever, showing the exterior keypad unit on the left and the interior lever unit on the right, both in matte black.

Image: The BESTTEN Digital Electronic Keypad Deadbolt Door Lever. This image displays both the exterior keypad assembly with numbered buttons and a keyhole, and the interior lever assembly, both finished in matte black.

The product consists of an exterior keypad unit and an interior lever unit. The exterior unit features a numeric keypad (0-9), lock/unlock buttons, and a traditional key override. The interior unit includes the thumb-turn for manual locking/unlocking and the door lever.

Setup and Installation

Proper installation is crucial for the optimal performance of your digital deadbolt. While the installation process is generally straightforward, careful attention to detail is required.

Tools Required:

  • Phillips head screwdriver
  • Measuring tape
  • Pencil
  • Drill (if new door preparation is needed)

Pre-Installation Checks:

  • Ensure your door thickness is compatible with the lock (typically 1-3/8" to 2" or 35mm to 50mm).
  • Verify the backset (distance from door edge to center of bore hole) is either 2-3/8" (60mm) or 2-3/4" (70mm).
  • Confirm the bore hole diameter is 2-1/8" (54mm).

Installation Steps:

  1. Prepare the Door: If installing on a new door, drill holes according to the provided template. For existing doors, ensure the existing holes meet the specifications.
  2. Install the Latch Bolt: Insert the latch bolt into the door edge, ensuring the "UP" arrow is facing upwards. Secure with screws.
  3. Install the Exterior Keypad Assembly: Feed the cable from the exterior keypad through the bore hole. Align the keypad assembly with the latch bolt and secure it to the door.
  4. Install the Interior Mounting Plate: Route the cable through the mounting plate and secure the plate to the door using screws.
  5. Connect the Cable and Install the Interior Assembly: Connect the cable from the exterior unit to the port on the interior assembly. Carefully tuck excess wire into the cavity. Ensure the thumb-turn spindle engages correctly with the latch bolt mechanism.
  6. Secure the Interior Assembly: Attach the interior assembly to the mounting plate using the provided screws.
  7. Install Batteries: Open the battery cover on the interior assembly and insert 4 AA alkaline batteries (not included), observing polarity.
  8. Perform Handing Procedure: This step is critical for correct operation. Follow the specific instructions in the included user manual for your model to calibrate the lock for left-hand or right-hand door orientation. This typically involves pressing a button while installing batteries or after a battery change.
  9. Test Operation: Test the lock with the mechanical key and by entering the default programming code (if applicable) to ensure smooth operation before closing the door.

Note: For detailed visual guidance, refer to the specific installation diagrams and instructions provided in the physical user manual included with your product. Incorrect wiring or assembly can lead to malfunction.

Operating Instructions

Your BESTTEN digital deadbolt offers multiple ways to secure and access your property.

Setting Up User Codes:

Before setting up user codes, you will need the default programming code (often found on a sticker on the interior unit or in the manual). It is highly recommended to change this default code immediately after installation.

  1. Change Programming Code: Enter the default programming code, press the "Lock" button, then press "1", then press "Lock" again. Enter your new 4-10 digit programming code, press "Lock", re-enter the new programming code, and press "Lock".
  2. Add User Code: Enter the programming code, press the "Lock" button, then press "2", then press "Lock" again. Enter a new 4-10 digit user code, press "Lock", re-enter the user code, and press "Lock". Repeat for additional user codes.
  3. Delete User Code: Enter the programming code, press the "Lock" button, then press "3", then press "Lock" again. Enter the user code to be deleted, press "Lock", re-enter the user code, and press "Lock".
  4. Delete All User Codes: Enter the programming code, press the "Lock" button, then press "4", then press "Lock" again. This will delete all user codes except the programming code.

Note: Specific button sequences may vary slightly. Always refer to the detailed programming instructions in your product's included manual.

Locking the Door:

  • From Exterior: Press the "Lock" button on the keypad. The deadbolt will extend.
  • From Interior: Rotate the thumb-turn on the interior unit to the locked position.

Unlocking the Door:

  • Using Keypad: Enter a valid user code, then press the "Unlock" button (or the "Lock" button, depending on model). The deadbolt will retract.
  • Using Mechanical Key: Insert the key into the keyhole on the exterior unit and turn to unlock.
  • From Interior: Rotate the thumb-turn on the interior unit to the unlocked position.

Maintenance

Regular maintenance ensures the longevity and reliable operation of your digital deadbolt.

Battery Replacement:

The lock requires 4 AA alkaline batteries. When the batteries are low, the lock may emit a series of beeps or a red light may flash after a code entry. Replace all four batteries simultaneously. Do not mix old and new batteries or different battery types.

  1. Remove the battery cover on the interior assembly.
  2. Remove the old batteries.
  3. Insert new AA alkaline batteries, ensuring correct polarity (+/-).
  4. Replace the battery cover.
  5. Test the lock's operation.

Note: Replacing batteries typically does not erase programmed user codes.

Cleaning:

  • Clean the lock's exterior surfaces with a soft, damp cloth.
  • Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.
  • Do not spray water directly onto the keypad or lock mechanism.

Lubrication:

Periodically (e.g., once a year), apply a small amount of graphite lubricant to the key cylinder to ensure smooth key operation. Do not use oil-based lubricants.

Troubleshooting

If you encounter issues with your BESTTEN digital deadbolt, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Keypad does not respond or light up.Dead batteries; incorrect battery installation; loose cable connection.Replace all batteries with new AA alkaline batteries, ensuring correct polarity. Check that the cable between the exterior and interior units is securely connected.
Lock does not lock/unlock after code entry.Incorrect user code; deadbolt mechanism obstructed; handing procedure not performed or incorrect; low batteries.Verify the user code. Check for any obstructions in the door frame or strike plate. Perform the handing procedure again as per the manual. Replace batteries.
Lock makes grinding noises or struggles to operate.Misalignment of lock components; low batteries; internal mechanism issue.Check door and frame alignment. Ensure the latch bolt moves freely. Replace batteries. If the issue persists, contact customer support.
Cannot program new codes.Incorrect programming code; incorrect programming sequence.Ensure you are using the correct programming code. Follow the programming steps precisely as outlined in the manual.
Mechanical key does not work.Wrong key; debris in key cylinder; damaged key cylinder.Ensure you are using the correct key. Try applying graphite lubricant to the key cylinder. If damaged, contact customer support.

If the problem persists after attempting these solutions, please contact BESTTEN customer support for further assistance.

Specifications

FeatureDetail
BrandBESTTEN
ModelDD2-L-MB
Product Dimensions22.86 x 20.32 x 10.16 cm (8.9 x 8.0 x 4.0 inches)
Item Weight1.56 kg (3.44 lbs)
MaterialAlloy Steel
Finish TypeMatte Black
Lock TypeKeypad, Deadbolt
Special FeaturesDurable, Electric
Power Source4 x AA Batteries (not included)
Included ComponentsUser Manual, Keys

Warranty and Support

BESTTEN is committed to providing high-quality products and customer satisfaction. While specific warranty details are not provided here, most BESTTEN products come with a limited warranty covering manufacturing defects.

For warranty claims, technical assistance, or any questions regarding your product, please contact BESTTEN customer service. Have your model number (DD2-L-MB) and purchase information ready when contacting support.

You can typically find contact information on the BESTTEN official website or through the retailer where you purchased the product.

© 2024 BESTTEN. All rights reserved.

This manual is for informational purposes only. Product specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.