1. Introduction
Thank you for choosing the Cabasse MC170 Floorstanding Speaker. This manual provides essential information for the proper setup, operation, and maintenance of your new speaker. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Safety Information
To prevent fire, electric shock, or product damage, please observe the following safety precautions:
- Do not expose the speaker to rain or moisture.
- Do not place objects filled with liquids, such as vases, on the speaker.
- Ensure proper ventilation; do not block any ventilation openings.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Use only attachments/accessories specified by the manufacturer.
- Refer all servicing to qualified service personnel.
3. Package Contents
Please check that your package contains the following items:
- Cabasse MC170 Floorstanding Speaker (1 unit)
- Protective Grille
- User Manual (this document)
4. Setup
4.1 Unpacking
Carefully remove the speaker from its packaging. Retain the original packaging materials for future transport or storage.
4.2 Speaker Placement
The Cabasse MC170 is a floorstanding speaker designed for optimal sound reproduction in a stereo or home theater setup.
- Place the speakers on a stable, level surface.
- For stereo listening, position the speakers equidistant from your primary listening position, forming an equilateral triangle.
- Keep speakers away from corners or walls to avoid excessive bass resonance, typically at least 20-30 cm (8-12 inches) from the wall.
- Ensure there is adequate space around the speaker for air circulation.

This image displays two Cabasse MC170 floorstanding speakers. The speaker on the left has its protective grille removed, revealing the three drivers: a tweeter at the top, followed by two mid-range/bass drivers. The speaker on the right has its grille attached, covering the drivers. Both speakers feature a dark oak wood finish and a sturdy base.
4.3 Connecting to an Amplifier
The Cabasse MC170 speaker connects to your amplifier using standard speaker cables.
- Ensure your amplifier is turned OFF before making any connections.
- Identify the positive (+) and negative (-) terminals on both your speaker and your amplifier. The positive terminal is usually red, and the negative is black.
- Connect the positive (+) terminal of the speaker to the positive (+) terminal of the corresponding amplifier channel.
- Connect the negative (-) terminal of the speaker to the negative (-) terminal of the corresponding amplifier channel.
- Ensure all connections are secure to prevent short circuits or poor sound quality.
5. Operating Instructions
Once the speaker is properly connected to your amplifier, you can begin using it.
- Turn on your amplifier and select the appropriate input source.
- Start with the volume at a low level and gradually increase it to your desired listening level.
- Adjust bass and treble settings on your amplifier or audio source to suit your preference.
- For optimal sound, allow the speakers to "break-in" for several hours of playback at moderate volume.
6. Maintenance
Proper care will ensure the longevity and performance of your Cabasse MC170 speakers.
- Clean the speaker cabinet with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- If the protective grille becomes dusty, gently vacuum it with a soft brush attachment or wipe it with a slightly damp cloth. Ensure it is completely dry before reattaching.
- Avoid touching the speaker drivers directly, as this can cause damage.
- Keep the speakers away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter issues with your speaker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speaker | Loose or incorrect speaker cable connection. Amplifier not powered on or wrong input selected. | Check all speaker cable connections at both the speaker and amplifier. Ensure amplifier is on and correct input is selected. |
| Distorted sound | Volume too high. Damaged speaker cable. Amplifier clipping. | Reduce volume. Inspect speaker cables for damage and replace if necessary. Ensure amplifier is not overdriven. |
| Weak or unbalanced sound | Incorrect speaker polarity (+/-). Speaker placement issues. | Verify positive and negative connections are consistent for both speakers. Adjust speaker placement for better acoustics. |
8. Specifications
| Brand | Cabasse |
| Model | MC170 |
| Manufacturer Reference | CABMC170JERSCHFC |
| Item Weight | 15 Kilograms |
| Mounting Type | Floorstanding |
| First Available | February 26, 2021 |
9. Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Cabasse website. Keep your proof of purchase for warranty claims.
Official Website: www.cabasse.com





