KIWI design VR Stand S2-1 Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your KIWI design VR Stand S2-1. This stand is designed to securely store and display your VR headset and touch controllers, helping to keep your gaming area organized and your equipment protected.

2. What's in the Box

• VR Stand Components (Base, Main Support, Headset Tray, Controller Holders)
• Instruction Manual

3. Assembly Instructions

Follow these steps to assemble your KIWI design VR Stand S2-1:

1. Attach Main Support to Base: Firmly press the main support column into the designated slot on the base until you hear a click, ensuring it is securely locked.
2. Install Controller Holders: Insert the rotatable controller holders into the slots on the headset tray. These can be adjusted to face inwards or outwards depending on your controller type.
3. Attach Headset Tray: Slide the headset tray onto the main support column. Ensure it sits flush and is stable.
4. Optional: Install Light Blocking Sticker: For VR headsets that may self-start due to reflected light, apply the provided light blocking sticker to the designated area on the headset tray.

Figure 3.1: Fully assembled KIWI design VR Stand S2-1, showcasing a VR headset and controllers in place.

4. Operating Instructions

Once assembled, the VR Stand S2-1 provides a convenient and secure location for your VR equipment.

4.1 Placing Your VR Headset

• Gently place your VR headset onto the top platform of the stand. The platform features an increased silicone surface and a tilt angle to prevent scratching and accidental slipping.
• Ensure the headset is centered and stable on the platform.

Figure 4.1: The headset platform with its increased silicone surface and tilt angle, designed to protect the VR headset and prevent slipping.

4.2 Storing Touch Controllers

• The stand includes rotatable handle holders for your touch controllers. Adjust the holders to face inwards or outwards to best accommodate your specific controller model.
• Place your touch controllers onto the designated holders.

Figure 4.2: Illustration of the rotatable handle holders, demonstrating how they can be adjusted for various VR controller designs (inward for Quest 2/PSVR 2/HP Reverb G2/Pico 4, outward for Valve Index).

4.3 Additional Storage (Headphones & Cables)

• The stand is designed to accommodate additional accessories such as headphones, extended data cables, and head straps.
• Hang your headphones on the rear hook.
• Wrap excess cables around the designated cable management area to keep them tidy.

Figure 4.3: Headphones neatly stored on the integrated hook at the back of the VR stand.

Figure 4.4: Cables organized around the stand, utilizing the integrated cable management features.

5. Compatibility

The KIWI design VR Stand S2-1 is compatible with most full-size VR headsets and their corresponding touch controllers, including but not limited to:

• Quest 2
• PSVR 2
• Valve Index
• HP Reverb G2
• Pico 4
• Quest (original)

Note: This VR stand is not compatible with Quest 3.

Figure 5.1: Visual representation of compatible VR headset models, including PSVR 2, Quest 2, HP Reverb G2, and Valve Index.

6. Features

• Enhanced Stability: Features a unique non-slip sponge design and a strong textured base for secure placement of your VR headset and controllers.
• All-in-One Storage: Designed to hold VR headsets, touch controllers, headphones, and manage cables, consolidating your VR accessories.
• Lens Protection: The vertical stand design ensures no contact with the VR headset lenses, preventing scratches.
• Rotatable Controller Holders: Adjustable holders accommodate various controller types for optimal fit.
• Sleek Vertical Design: Minimizes desktop space while providing an organized display solution.

Figure 6.1: Comparison highlighting the stable design of the KIWI design VR Stand S2-1, which is heavier and less prone to tipping than other stands.

Figure 6.2: Demonstrates the organizational benefits of the VR stand, transforming a cluttered setup into a tidy display.

7. Maintenance

To ensure the longevity and appearance of your VR Stand S2-1:

• Wipe the stand regularly with a soft, dry cloth to remove dust.
• Avoid using abrasive cleaners or solvents, as these may damage the surface finish.
• Ensure the stand is placed on a flat, stable surface to prevent accidental tipping.

8. Troubleshooting

If you encounter any issues with your VR Stand S2-1, consider the following:

• Stand Instability: Ensure all components are securely clicked into place during assembly. Verify the stand is on a flat, level surface.
• Headset Self-Starting: If your VR headset activates unexpectedly while on the stand, ensure the light blocking sticker (if provided) is correctly applied to reduce reflected light to the headset's sensors.
• Controllers Not Fitting: Adjust the rotatable controller holders to the appropriate inward or outward position for your specific controller model.

9. Specifications

10. Warranty and Support

Your KIWI design VR Stand S2-1 comes with a 24-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures product quality.

For technical support, warranty claims, or any inquiries, please contact KIWI design customer service through their official website or the retailer where the product was purchased.

Manufacturer: KIWI design