Acctim Neige Weather Station Projection Alarm Clock

1. Introduction

Thank you for purchasing the Acctim Neige Weather Station Projection Alarm Clock. This device combines a precise time display with comprehensive weather monitoring capabilities, including indoor and outdoor temperature, barometric trend, and weather forecasting. It also features a convenient projection function for time and outdoor temperature, and an alarm with snooze. Please read this manual thoroughly before operating the device to ensure proper use and to maximize its features.

2. Package Contents

• Acctim Neige Weather Station Projection Alarm Clock Main Unit
• Wireless Outdoor Temperature Sensor
• USB Power Cable (90cm)
• User Manual (this document)

3. Product Overview

Familiarize yourself with the main unit and its components.

Figure 3.1: Main Unit Front View. This image shows the front of the Acctim Neige Weather Station Projection Alarm Clock. The large LCD screen displays the indoor and outdoor temperature, humidity, weather forecast icons, current time, date, and moon phase. Above the screen, the brand name "acctim" is visible. To the right, a red digital time (10:23) and a cloud icon are projected onto a surface, indicating the projection feature.

Figure 3.2: Main Unit Angled View. This image provides an angled perspective of the Acctim Neige Weather Station. It highlights the projection arm extending from the right side, which projects the time and weather icon. The top of the unit features a red "SNOOZE / LIGHT" button, and the side of the projection arm has "ON/OFF" and "180°" buttons for controlling the projection. The main display shows similar information as Figure 3.1.

Figure 3.3: Wireless Outdoor Temperature Sensor. This image displays the compact, rectangular wireless outdoor temperature sensor. It is light-colored with a black display showing "20.5°C" and "433 MHz REMOTE SENSOR". The sensor is shown mounted on a brick wall, indicating its intended outdoor placement.

3.1. Buttons and Controls

4. Setup

4.1. Powering the Main Unit

The main unit can be powered by either batteries or the included USB cable.

• Battery Power: Insert 2 x AA batteries (not included) into the battery compartment located on the back of the unit, observing the correct polarity (+/-).
• USB Power: Connect the supplied USB cable to the USB port on the main unit and plug the other end into a compatible USB power adapter (not included) or a powered USB port. Using USB power ensures continuous display brightness and projection.

Note: When using battery power only, the display may dim to conserve energy, and the projection feature might be limited or require manual activation.

4.2. Installing the Outdoor Sensor

The wireless outdoor sensor transmits temperature data to the main unit.

1. Open the battery compartment on the back of the outdoor sensor.
2. Insert 2 x AAA batteries (not included), ensuring correct polarity.
3. Close the battery compartment securely.
4. Place the sensor outdoors in a shaded area, protected from direct sunlight and rain, to ensure accurate temperature readings. Avoid placing it near heat sources or reflective surfaces.
5. The main unit should automatically connect to the outdoor sensor within a few minutes. If not, refer to the "Troubleshooting" section.

5. Operating Instructions

5.1. Setting Time and Date

1. Hold the MODE / SET button for approximately 3 seconds to enter time setting mode. The hour digits will flash.
2. Use the MAX / MIN or ALARM buttons to adjust the hour.
3. Press MODE / SET again to confirm the hour and move to minute setting.
4. Repeat step 2 and 3 for minutes, year, month, and day.
5. Press MODE / SET one last time to exit setting mode.

5.2. Setting the Alarm

1. Press the MODE / SET button repeatedly until "ALARM" is displayed.
2. Hold the MODE / SET button for approximately 3 seconds. The alarm hour digits will flash.
3. Use the MAX / MIN or ALARM buttons to adjust the alarm hour.
4. Press MODE / SET to confirm and move to minute setting.
5. Adjust minutes using MAX / MIN or ALARM.
6. Press MODE / SET to exit alarm setting.
7. To activate/deactivate the alarm, press the ALARM button briefly when the alarm time is displayed. An alarm icon will appear/disappear on the screen.

5.3. Using the Snooze Function

When the alarm sounds, press the SNOOZE / LIGHT button to activate the snooze function. The alarm will temporarily stop and sound again after approximately 5-10 minutes. To stop the alarm completely, press any other button.

5.4. Weather Forecast

The weather station predicts weather conditions for the next 6-12 hours based on barometric pressure changes. The forecast is displayed using intuitive icons (e.g., sunny, partly cloudy, cloudy, rainy). This is a prediction and may not always perfectly match current conditions.

5.5. Projection Feature

The projection feature allows you to project the current time and outdoor temperature onto a wall or ceiling.

• To turn the projection on/off, use the PROJECTION ON/OFF button on the side of the projection arm.
• To rotate the projected image by 180 degrees, press the PROJECTION 180° button.
• Adjust the angle of the projection arm manually to direct the image as desired.

5.6. Display Brightness Control

Press the DIMMER button repeatedly to cycle through different brightness levels for the main display. This allows for comfortable viewing in various lighting conditions.

5.7. Viewing MAX/MIN Records

Press the MAX / MIN button to view the maximum and minimum recorded indoor and outdoor temperatures and humidity levels since the last reset. Press again to cycle through the records.

6. Maintenance

• Cleaning: Wipe the unit and sensor with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace batteries in both the main unit and the outdoor sensor when the low battery indicator appears on the display. Ensure correct polarity.
• Placement: Ensure the outdoor sensor remains in a shaded, protected location for accurate readings and longevity.
• Storage: If storing the unit for an extended period, remove all batteries to prevent leakage.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Acctim products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your purchase or visit the official Acctim website.

Acctim Official Website: www.acctim.com (Please note: This is a placeholder URL. Refer to your product packaging or official brand information for the correct support contact.)