1. Introduction
This manual provides essential instructions for the assembly, operation, and care of your FLEXISPOT Comhar Electric Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.
Image: The FLEXISPOT Comhar Electric Standing Desk, featuring a bamboo-look desktop, black frame, integrated drawer, and control panel with USB ports.
2. Safety Information
- Always ensure the desk is properly assembled and anchored.
- Do not exceed the maximum weight limit of 100 lbs (45 kg).
- Exercise caution when adjusting the desk height to prevent injury or damage to objects.
- Keep children and pets away from the desk during operation.
- Ensure all cables are properly managed to avoid entanglement during height adjustments.
- Do not place liquids directly on the control panel or near electrical components.
3. Package Contents
Verify that all components are present before beginning assembly:
- Desktop (Bamboo-Look Laminate)
- Adjustable Frame (Black)
- Electric Motor Lift Mechanism
- Integrated Storage Drawer
- Control Panel with USB Charge Ports (Type-A and Type-C)
- Assembly Hardware (screws, Allen wrench)
- Instruction Manual (this document)
4. Assembly Instructions
The FLEXISPOT Comhar Electric Standing Desk is designed for easy assembly. The tabletop comes as a single piece, simplifying the process. Follow these steps carefully:
4.1. Frame Assembly
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Attach the drive rod to the motor and the opposite leg. Ensure the bolt is loose enough to rotate the drive rod if needed for proper fit, but do not rotate over 60 degrees.
- Connect the two leg frames using the crossbar. Ensure the pilot holes align with the bulges on the columns. Secure with screws.
- Attach the desk feet to the bottom of the leg columns. Pay attention to the direction of the desk feet; the long side should face the front.
Video: FLEXISPOT ET156W-C Installation Guide. This video demonstrates the assembly process for the desk frame and attachment to the desktop.
4.2. Attaching Desktop and Wiring
- Carefully place the assembled frame onto the underside of the desktop. Align the screw holes.
- Secure the frame to the desktop using the provided screws and tools.
- Install the adaptor holder onto the beam, next to the motor, ensuring the narrow side faces the motor.
- Connect all necessary cables: the motor cable, control panel cable, and power cable. Ensure secure connections. Use cable management clips if provided to keep wires tidy.
Image: Diagram illustrating the desk dimensions (47.4" x 23.8") and key components: Desktop, Desk frame, and Desk feet.
Image: Close-up of the smart control panel, highlighting height memory presets (1, 2, 3, 4), Type-C and Type-A USB ports, child lock, and up/down movement buttons.
5. Operating Instructions
5.1. Electric Height Adjustment
The desk features a robust motor for smooth height transitions. Use the up and down arrow buttons on the control panel to adjust the desk height between 28.9 inches and 46.5 inches.
Image: Visual representation of the desk's height adjustment range, from a minimum of 28.9 inches to a maximum of 46.5 inches.
5.2. Programmable Height Presets
The control panel includes four programmable height presets (1, 2, 3, 4). To save a desired height:
- Adjust the desk to your preferred height using the up/down arrows.
- Press the 'M' button, then press the desired number button (1, 2, 3, or 4) to save the current height.
- To recall a saved height, simply press the corresponding number button.
5.3. USB Charge Ports
The integrated USB ports (Type-A and Type-C) allow you to charge up to three devices. Note that USB ports may temporarily pause charging while the desk height is being adjusted.
5.4. Anti-Collision Technology
The desk is equipped with an anti-collision feature. If an obstacle is detected during height adjustment, the desk will automatically stop and reverse slightly to prevent damage.
Image: The desk's anti-collision feature is demonstrated, showing the desk stopping and reversing upon encountering an obstacle.
6. Maintenance
- Regularly inspect all screws and connections to ensure they are tight.
- Clean the desktop surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Keep the motor and electrical components free from dust and moisture.
- Do not attempt to disassemble or repair the motor or control unit yourself. Contact customer support for assistance.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected, motor cable loose, control panel issue. | Check all cable connections. Ensure power is supplied. Reset the desk by unplugging for 30 seconds and plugging back in. |
| Desk moves unevenly or makes unusual noises. | Uneven load, loose screws, obstruction. | Distribute weight evenly on the desktop. Check for loose screws and tighten. Ensure no objects are obstructing the legs. |
| USB ports not charging. | Desk is adjusting height, cable issue, device incompatibility. | Charging pauses during height adjustment; wait for movement to stop. Check USB cables. Ensure device supports USB charging. |
| Anti-collision feature triggers frequently. | Obstacles in the path of movement. | Clear the area around the desk legs and under the desktop. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | FLEXISPOT |
| Model Number | B08WXFMPQQ |
| Product Dimensions | 47.3"D x 23.7"W x 47.6"H |
| Color | Bamboo Texture/Black |
| Style | Modern |
| Base Material | Metal |
| Finish Type | Powder Coated |
| Special Feature | Adjustable Height |
| Recommended Uses | Working |
| Included Components | Built-in USB Port |
| Maximum Weight Recommendation | 242 Pounds (Note: Feature bullets state 100 lbs, using the higher spec from detailed specifications) |
| Warranty Type | Limited |
| Required Assembly | Yes |
| Includes All Assembly Tools | Yes |
| Number of Drawers | 1 |
| Tabletop Thickness | 2.6 Inches |
| Maximum Height | 120.9 Centimeters (47.6 inches) |
| Minimum Height | 23.6 Inches |
| Is Electric | Yes |
9. Warranty and Support
This FLEXISPOT Comhar Electric Standing Desk comes with a Limited Warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or visit the official FLEXISPOT website.
For further assistance, you may contact FLEXISPOT customer support directly.
