1. Introduction
This manual provides essential information for the safe and efficient operation of your Candy CS41061DE/1-S Slim Washing Machine. Please read these instructions carefully before using the appliance and keep them for future reference. Proper installation, use, and maintenance will ensure optimal performance and longevity of your washing machine.
Image 1: Front view of the Candy CS41061DE/1-S Slim Washing Machine. This image shows the compact design, control panel, and front-loading door.
2. General Safety Rules
It is crucial to adhere to the following safety guidelines to prevent accidents and ensure the safe operation of the appliance.
- This appliance is intended for domestic use only. Any other use, such as in commercial kitchens, agricultural settings, hotels, or bed & breakfasts, is not covered by the warranty. Improper use may void the product warranty.
- Children should be supervised to ensure they do not play with the appliance.
- Children under 3 years of age should be kept away from the appliance unless continuously supervised.
- If the power supply cable is damaged, it must be replaced by a special cable or assembly available from the manufacturer or its service agent.
- Only use the inlet hose supplied with the appliance for connection to the water mains. Old hoses must not be reused.
- Water pressure must be between 0.05 MPa and 0.8 MPa.
- Ensure that no carpet obstructs the base of the washing machine or the ventilation openings.
- After installation, the appliance must be positioned so that the plug is accessible.
- The maximum dry laundry capacity varies by model. Refer to the appliance's specifications for details.
Image 2: Excerpt from the user manual detailing general safety rules. This section highlights important precautions for safe operation.
3. Setup and Installation
Proper installation is essential for the washing machine's performance and safety. Follow these steps carefully.
3.1 Unpacking and Positioning
- Remove all packaging materials.
- Remove the transport bolts located at the rear of the machine. These bolts secure the drum during transit and must be removed before use. Failure to do so will cause severe vibration and damage.
- Position the washing machine on a firm, level floor. Adjust the feet to ensure the appliance is stable and level.
3.2 Water Supply Connection
- Connect the water inlet hose to a cold water tap with a 3/4" thread. Ensure the connection is tight to prevent leaks.
- Do not use old or previously used hoses.
3.3 Drain Water Connection
Connect the drain hose correctly to ensure proper water discharge.
- Drain Hose to Standpipe:
- Use only the supplied drain hose.
- Hook the drain hose onto a standpipe with adequate dimensions (Fig. 2-7).
- Ensure the support is sufficient to prevent the hose from slipping. The standpipe should be between 80-100 cm high.
- Drain Hose to Sink Connection:
- The connection must be located above the siphon (Fig. 2-9).
- A connection with a stopper (A) must be removed to prevent malfunctions.
- Secure the drain hose with a clamp.
WARNING!
- The drain hose must not be immersed in water and must be securely fastened and free of kinks.
- If the drain hose is placed on the floor or at a height lower than 80 cm, the washing machine will continuously drain water during filling.
- The drain hose must not be extended. Contact customer service if an extension is needed.
Image 3: Diagrams illustrating correct drain water connection methods for the washing machine, including standpipe and sink connections (Fig. 2-7, 2-8, 2-9).
3.4 Electrical Connection
- Ensure the voltage and frequency of the power supply match the ratings on the appliance's rating plate.
- Connect the appliance to a grounded electrical outlet. Do not use adapters or extension cords.
4. Operating Instructions
This section guides you through the daily operation of your Candy washing machine.
4.1 Before First Use
- Run a short wash cycle without laundry to clean the drum. Use a small amount of detergent.
4.2 Loading Laundry
- Sort laundry by fabric type, color, and degree of soiling.
- Open the door and load the laundry, ensuring not to overload the machine. The maximum capacity is 6 kg.
- Close the door firmly.
4.3 Detergent and Additives
- Pull out the detergent drawer.
- Add detergent to the main wash compartment and fabric softener to the designated compartment. Refer to detergent packaging for dosage.
- Push the drawer back in.
4.4 Program Selection
- Turn the program selector knob to choose the desired wash program (e.g., Cotton, Synthetics, Delicates, Quick Wash).
- Use the function buttons to select additional options such as temperature, spin speed (up to 1000 RPM), or delayed start.
4.5 Starting a Wash Cycle
- Press the Start/Pause button to begin the selected program.
- The display will show the remaining time or program status.
4.6 End of Cycle
- At the end of the cycle, the machine will signal completion.
- Open the door and remove the laundry.
- Leave the door slightly ajar to allow the drum to air dry and prevent odors.
5. Maintenance and Cleaning
Regular maintenance ensures the longevity and efficiency of your washing machine.
5.1 Cleaning the Exterior
- Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
5.2 Cleaning the Detergent Drawer
- Remove the detergent drawer by pressing the release lever.
- Rinse it under running water to remove any detergent residue.
- Clean the drawer housing with a brush.
- Reinsert the drawer.
5.3 Cleaning the Door Seal
- Regularly wipe the rubber door seal with a damp cloth to remove lint, dirt, and detergent residue. This prevents mold and odors.
5.4 Cleaning the Drain Filter
- The drain filter should be cleaned periodically to prevent blockages.
- Locate the filter cover at the bottom front of the machine.
- Place a shallow container underneath to catch any residual water.
- Carefully unscrew the filter counter-clockwise and remove it.
- Clean the filter under running water, removing any lint or foreign objects.
- Screw the filter back in clockwise until tight.
6. Troubleshooting
Before contacting service, check the following common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | No power supply; Door not closed; Program not selected; Start button not pressed. | Check power plug and fuse; Ensure door is firmly closed; Select a program; Press the Start/Pause button. |
| Water not filling | Water tap closed; Inlet hose kinked; Water pressure too low. | Open water tap; Straighten hose; Check water supply pressure. |
| Water not draining | Drain hose kinked or blocked; Drain filter blocked. | Straighten or clear drain hose; Clean the drain filter (refer to Maintenance section). |
| Excessive vibration/noise | Transport bolts not removed; Machine not level; Uneven load. | Remove transport bolts; Adjust leveling feet; Redistribute laundry inside the drum. |
| Detergent residue in drawer | Insufficient water pressure; Detergent clumping; Drawer dirty. | Check water pressure; Use less detergent or dissolve it first; Clean detergent drawer. |
7. Specifications
Key technical specifications for the Candy CS41061DE/1-S Slim Washing Machine.
| Feature | Specification |
|---|---|
| Model Number | CS4 1061DE/1-S |
| Brand | CANDY |
| Capacity | 6 kg |
| Maximum Spin Speed | 1000 RPM |
| Energy Efficiency Class | D (New EU Label) |
| Dimensions (H x W x D) | 89 x 60 x 45 cm |
| Weight | 61 kg |
| Color | White |
| Access Location | Front-loader |
| Special Features | Delayed start |
| Control Type | Push button |
Image 4: Energy label for the Candy CS41061DE/1-S washing machine, indicating its energy efficiency class D, 6 kg capacity, and 1000 RPM spin speed.
8. Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your appliance or visit the official CANDY website. Keep your purchase receipt as proof of purchase.
If you encounter issues not covered in the troubleshooting section, please contact CANDY customer service for assistance.
