WOLTU BT34dc Bar Table Instruction Manual

Introduction

Thank you for choosing the WOLTU BT34dc Bar Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new table. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The WOLTU BT34dc Bar Table, showcasing its design and potential use in a modern room with accompanying stools.

Safety Instructions

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assemble the table on a soft, clean surface to prevent scratches.
• Tighten all screws and bolts securely, but do not overtighten. Periodically check and retighten fasteners.
• Do not stand or sit on the table.
• Keep small parts away from children during assembly.
• Place the table on a level surface to prevent tipping.
• Maximum weight capacity: 100 kg. Do not exceed this limit.

Package Contents

Please verify that all components listed below are included in your package:

• Tabletop (1x)
• Table Legs (4x)
• Crossbars/Support Beams (2x)
• Adjustable Non-slip Foot Pads (4x)
• Assembly Hardware (screws, bolts, Allen key)
• Instruction Manual (this document)

Image: An underside view of the table, illustrating the connection points for the frame and tabletop, which are crucial for assembly.

Setup and Assembly Instructions

Follow these steps to assemble your WOLTU BT34dc Bar Table:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage.
2. Attach Foot Pads: Screw the adjustable non-slip foot pads onto the bottom of each table leg. Do not overtighten.
3. Assemble Frame: Connect the table legs using the provided crossbars and hardware. Ensure all connections are aligned before partially tightening screws.
4. Attach Tabletop: Place the tabletop upside down on a soft surface. Carefully align the assembled frame with the pre-drilled holes on the underside of the tabletop. Secure the tabletop to the frame using the appropriate screws.
5. Final Tightening: Once all parts are connected, gradually tighten all screws and bolts until secure. Do not overtighten.
6. Position Table: Carefully turn the table upright and place it in its desired location. Adjust the foot pads if necessary to ensure stability on uneven floors.

Image: A close-up view of the adjustable non-slip foot pad, illustrating how it can be rotated to level the table on uneven surfaces.

Operating Instructions (Usage)

The WOLTU BT34dc Bar Table is designed for versatile use in various settings:

• Dining: Use as a compact dining table for small spaces.
• Bistro/Bar: Ideal for enjoying drinks or light meals, providing a comfortable height for standing or sitting with bar stools.
• Console: Can serve as a stylish console table in hallways or living areas.
• Work Surface: Suitable as a temporary work surface for laptops or crafts.

The 100 cm height is designed for comfortable posture. The integrated crossbar can be used as a footrest for added comfort.

Image: The bar table with a fruit bowl and mugs, illustrating its practical use as a surface for food and beverages.

Maintenance and Care

To ensure the longevity and appearance of your WOLTU BT34dc Bar Table, follow these care guidelines:

• Cleaning: Wipe the tabletop and metal frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Spills: Clean up spills immediately to prevent staining, especially on the tabletop.
• Heat Protection: Use coasters or placemats for hot items to protect the tabletop surface.
• Scratch Prevention: Avoid dragging sharp or heavy objects across the tabletop.
• Fastener Check: Periodically check all screws and bolts and retighten them as needed to maintain stability.

Image: A detailed view of the tabletop's dark beech finish and the sturdy metal frame, highlighting the materials that require proper care.

Troubleshooting

If you encounter any issues with your bar table, refer to the following common solutions:

• Table is Wobbly:
  • Ensure all assembly screws and bolts are securely tightened.
  • Adjust the non-slip foot pads on each leg to compensate for uneven flooring.
  • Verify the table is placed on a flat, level surface.
• Parts Missing or Damaged:
  • Review the "Package Contents" section. If parts are genuinely missing or damaged upon arrival, contact WOLTU customer support.

Specifications

Image: A diagram illustrating the precise dimensions of the bar table, including its 60cm width, 60cm depth, and 102cm height.

Warranty and Support

WOLTU is committed to providing high-quality products. For any questions, concerns, or support needs regarding your BT34dc Bar Table, please refer to your purchase documentation or contact WOLTU customer service directly. Information regarding specific warranty terms and conditions can typically be found on the WOLTU official website or through your retailer.

For further assistance, please visit the WOLTU Brand Store.