Introduction
This manual provides essential information for the safe and efficient operation of your Fischer & Honsel Pool TW 40075 LED Floor Lamp. Please read these instructions carefully before assembly and use, and retain them for future reference.
Safety Instructions
- Ensure the power supply voltage matches the lamp's requirements (230 Volts).
- This product is designed for indoor use only (IP20 rating). Do not expose to moisture or extreme temperatures.
- Do not attempt to modify or repair the lamp. Repairs should only be performed by qualified personnel.
- Always disconnect the power supply before cleaning or performing any maintenance.
- Keep packaging materials away from children to prevent choking hazards.
- The LED light sources are permanently installed and cannot be replaced by the user.
Package Contents
Verify that all components are present before assembly:
- 1 x Fischer & Honsel Pool TW 40075 LED Floor Lamp (unassembled)
- 1 x User Manual
Setup
Follow these steps to assemble your floor lamp:
- Carefully unpack all components and place them on a clean, flat surface.
- Attach the base to the main pole, ensuring it is securely fastened.
- Connect the upper sections of the lamp pole, twisting them clockwise until tight. Ensure all electrical connections within the poles are properly aligned.
- Position the flexible reading arm as desired.
- Place the lamp in its desired location, ensuring it is stable and on a level surface.
- Plug the power cord into a suitable 230V AC outlet.
Operating Instructions
Power On/Off and Dimming
The lamp features a sensor dimmer switch. To turn the lamp on or off, or to adjust the brightness, use the touch-sensitive controls located on the lamp pole. The uplighter and the reading arm can be dimmed continuously and independently.
Color Temperature (CCT) Adjustment
The CCT function allows you to select from three distinct color temperature levels:
- 2700 K (Warm White): Provides a cozy and relaxing atmosphere.
- 3350 K (Neutral White): Suitable for general illumination and daily tasks.
- 4000 K (Cool White): Ideal for focused work or when higher alertness is desired.
Cycle through these color temperatures using the dedicated CCT control on the lamp. This function enhances the versatility of the lamp for various moods and activities.
Maintenance
Cleaning
- Before cleaning, ensure the lamp is unplugged from the power outlet.
- Wipe the lamp's metal surfaces with a soft, dry cloth.
- For glass components, use a soft, damp cloth and a mild glass cleaner if necessary. Avoid abrasive cleaners.
LED Lifespan
The integrated LED light sources have an average lifespan of 30,000 hours, providing long-lasting illumination without the need for bulb replacement.
Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply. | Check if the power cord is securely plugged into the outlet. Verify the outlet is functional. |
| Light flickers or is unstable. | Loose connection or power fluctuation. | Ensure all lamp sections are tightly assembled. Try plugging into a different outlet. |
| Dimming or CCT function not responding. | Sensor issue or temporary malfunction. | Unplug the lamp for 30 seconds, then plug it back in to reset. Ensure the sensor area is clean. |
If the problem persists, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 40075 |
| Brand | Fischer & Honsel |
| Dimensions (L x W x H) | 32 x 32 x 182 cm |
| Weight | 7.61 kg |
| Color | Nickel |
| Material | Metal, Glass (shade) |
| Light Source | Integrated LED (Uplighter: 28W, Reading Arm: 5W) |
| Voltage | 230 Volts AC |
| Luminous Flux | 3500 lm (total) |
| Color Temperature (CCT) | 2700 K, 3350 K, 4000 K (adjustable) |
| Dimmable | Continuously dimmable (uplighter and reading arm independently) |
| Switch Type | Sensor Dimmer |
| IP Rating | IP20 (Indoor use only) |
| Average Lifespan | 30,000 Hours |
| Energy Efficiency | High energy efficiency |
| Color Rendering Index (CRI) | 80 |
Warranty
This product is covered by a standard manufacturer's warranty. Please refer to your purchase documentation for specific terms and conditions. The warranty typically covers defects in materials and workmanship under normal use.
Support
For technical assistance, warranty claims, or further inquiries, please contact Fischer & Honsel customer service through their official website or the retailer where the product was purchased.