Introduction
The Speedlink RAIT Wireless Gamepad is designed for versatile gaming across multiple platforms, including PC, PlayStation 3 (PS3), and Nintendo Switch. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your gamepad to ensure optimal performance and longevity.
Key features of the RAIT Gamepad include a rubberised surface for enhanced grip, 10 buttons, 2 triggers, mode switches, a digital control pad, and two analogue sticks. It supports both DirectInput and XInput compatibility, offers a vibration function for immersive feedback, and an auto-fire function with LED indication. The gamepad connects wirelessly via a 2.4 GHz USB-A receiver, providing a range of up to 10 metres, and is powered by an integrated 600mAh lithium-ion battery.
Image: The Speedlink RAIT Wireless Gamepad shown alongside its dedicated USB wireless receiver.
Safety Instructions
Please read and adhere to the following safety instructions to prevent damage, malfunction, or injury.
Important Safety Instructions
- Caution: Failure to observe these instructions can cause product damage, explosion, fire, and/or electric shocks.
- Only use this device as indicated in the user guide. Do not open or repair it.
- Do not expose the device to liquids, heat, or cold.
- Do not use this device in a damp environment.
- Clean the device with a dry cloth.
- Keep the device and all loose parts away from children, pets, and unauthorized persons.
- Only use the device with the appropriate provided accessories.
- Disconnect the charging cable from the device if it will not be used for a long time. When disconnecting the cable, do not pull on the cord but on the plug.
- Do not use the cables in any other way than mentioned in the user guide; do not bend, cut, extend, knot, or step on them.
- Do not insert any foreign objects into the openings of the device.
- If the device is damaged in any way or gets too hot, stop using it immediately.
- Take caution when using the device if you have a pacemaker or are dependent on other sensitive electronic aids, as the device emits radio signals.
Warning Symbols and Markings
Extended use of input devices may cause health problems such as discomfort or pain; as such, take regular breaks and consult a doctor if problems persist.
The operation of the device may be affected by strong static, electrical or high-frequency fields (radio installations, mobile telephones, microwaves, electrostatic discharges). If this occurs, try increasing the distance from the devices causing the interference.
Conformity notice in further languages: www.speedlink.com
Package Contents
The Speedlink RAIT Wireless Gamepad package includes the following items:
- Speedlink RAIT Wireless Gamepad (Model: SL-650110-BK)
- USB-A Wireless Receiver
- Charging Cable (USB)
- Instruction Manual (this document)
Image: The retail packaging of the Speedlink RAIT Wireless Gamepad, showing the gamepad and receiver.
Setup
Follow these steps to set up your Speedlink RAIT Wireless Gamepad:
- Charging the Gamepad: Before first use, fully charge the gamepad. Connect the provided USB charging cable to the gamepad's charging port (located on the top edge) and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The integrated 600mAh lithium-ion battery requires approximately 2 hours for a full charge, providing up to 8 hours of gaming time.
- Connecting the USB-A Wireless Receiver:
- For PC/PS3: Insert the USB-A wireless receiver into an available USB port on your PC or PlayStation 3 console. The system should automatically detect and install the necessary drivers.
- For Nintendo Switch: Insert the USB-A wireless receiver into an available USB port on the Nintendo Switch dock. Ensure your Switch is in TV mode or connected to the dock.
- Powering On the Gamepad: Press and hold the central "Speedlink" logo button (MODE button) on the gamepad until the LED indicator lights up, indicating the gamepad is powered on and attempting to connect to the receiver.
- Pairing: The gamepad should automatically pair with the USB receiver. Once connected, the LED indicator on the gamepad will stabilize.
- Software Configuration (PC only): For advanced configuration and customization on PC, you may download specific software from the official Speedlink website. This software allows for fine-tuning of controls and other settings.
Image: Front view of the gamepad, highlighting the USB-C charging port located between the shoulder buttons.
Image: Close-up of the Speedlink USB-A wireless receiver.
Operating Instructions
Understanding the functions of your Speedlink RAIT Wireless Gamepad:
Gamepad Layout and Controls
The gamepad features a standard layout for intuitive control:
- Analogue Sticks: Two high-precision analogue sticks for 360-degree movement and camera control.
- Digital Control Pad (D-Pad): For precise directional input, often used in fighting games or menu navigation.
- Action Buttons (A, B, X, Y): Standard action buttons for in-game commands.
- Shoulder Buttons (L1, R1) and Triggers (L2, R2): Located on the top edge of the gamepad for quick access to various actions.
- BACK/SELECT and START Buttons: For in-game menu navigation and specific game functions.
- MODE Button (Speedlink Logo): Powers the gamepad on/off and switches between different operating modes (PC, PS3, Switch).
- RAPID Button: Activates the auto-fire function. An LED indicator will light up when auto-fire is active.
Image: Top view of the gamepad, showing the buttons, D-pad, and analogue sticks.
Image: Angled view of the gamepad, highlighting the ergonomic design and button placement.
Vibration Function
The gamepad features a vibration function that provides tactile feedback during gameplay, enhancing immersion. This function is automatically enabled when supported by the game and platform.
Auto-Fire Function
To activate the auto-fire function for a specific button, press and hold the desired action button, then press the RAPID button. The LED next to the RAPID button will illuminate to indicate that auto-fire is active for that button. Repeat the process to deactivate auto-fire.
Platform Compatibility (DirectInput / XInput)
The RAIT Gamepad supports both DirectInput and XInput modes, ensuring broad compatibility with PC games. The gamepad automatically switches to the appropriate mode based on the connected system or game requirements. For PC, ensure your game supports one of these input methods.
Maintenance
Proper maintenance will extend the life of your Speedlink RAIT Wireless Gamepad:
- Cleaning: Use a soft, dry cloth to clean the surface of the gamepad. Do not use liquid cleaners, solvents, or abrasive materials.
- Storage: When not in use for extended periods, store the gamepad in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To preserve battery life, avoid fully discharging the gamepad frequently. Charge it regularly, especially if it has been stored for a long time. Disconnect the charging cable once the gamepad is fully charged or if it will not be used for an extended period.
- Cable Handling: Always grasp the plug, not the cable, when disconnecting the charging cable. Avoid bending, twisting, or placing heavy objects on the cable.
Troubleshooting
If you encounter issues with your Speedlink RAIT Wireless Gamepad, refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Gamepad does not power on. |
|
| Gamepad does not connect to the receiver. |
|
| Buttons or sticks are unresponsive. |
|
| Vibration function is not working. |
|
| Auto-fire LED is not lighting up. |
|
| Gamepad becomes hot or damaged. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | RAIT Gamepad wireless |
| Item Model Number | SL-650110-BK |
| Brand | Speedlink |
| Controller Type | Gamepad |
| Connectivity Technology | 2.4 GHz Wireless (USB-A receiver) |
| Wireless Range | Up to 10 metres |
| Compatible Devices | Nintendo Switch, PC, PlayStation 3, Windows 10, Windows 11 |
| Battery | 1 x 600mAh Lithium Ion (included) |
| Gaming Time | Up to 8 hours |
| Charging Time | Approx. 2 hours |
| Product Dimensions (W x D x H) | 147 × 105 × 67 mm |
| Weight | 245 grammes |
| Features | Vibration function, Auto-fire function with LED, DirectInput & XInput compatibility, Rubberised surface |
| First Available Date | 15 Feb. 2021 |
Warranty and Support
For detailed warranty information, the latest user guide, frequently asked questions (FAQ), and further support, please visit the official Speedlink website:
You may also contact Speedlink directly:
- Manufacturer: Speedlink
- Phone: +49 (0) 4287 924-0
Please have your product model number (SL-650110-BK) and purchase details ready when contacting support.
