Introduction
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your StyleWell Mix and Match Wicker Outdoor Patio Stationary Lounge Chairs. These chairs are designed to enhance your outdoor living space with their durable construction and comfortable design. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product.
Safety Information
Always follow basic safety precautions when assembling and using this product to reduce the risk of injury or damage.
- Keep all assembly hardware out of reach of children.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand on the chair.
- This product is intended for single adult use.
- Place chairs on a flat, stable surface to prevent tipping.
- Avoid exposing the product to extreme weather conditions for prolonged periods to prevent damage.
Parts List
Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for replacement parts.
- Wicker Chair Frame (2 units)
- Olefin Seat Cushion (2 units)
- Assembly Hardware (bolts, washers, nuts, Allen wrench - quantities may vary)
Setup and Assembly
Light assembly is required for these lounge chairs. Follow these steps carefully.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratching.
Image: Two assembled StyleWell wicker lounge chairs with tan cushions, one angled and one straight, showcasing the product's appearance.
- Attach Legs to Frame: Identify the chair frame and the individual legs. Securely attach each leg to the designated points on the chair frame using the provided bolts and an Allen wrench. Do not fully tighten bolts until all are in place.
- Secure Armrests (if separate): If armrests are separate components, attach them to the chair frame using the appropriate hardware. Ensure they are aligned correctly.
Image: A close-up view of the brown wicker armrest, highlighting the detailed woven texture and construction of the chair.
- Final Tightening: Once all components are loosely assembled, place the chair upright on a flat surface. Systematically tighten all bolts and screws until secure. Do not overtighten.
Image: Two assembled StyleWell wicker lounge chairs with tan cushions, viewed from the back, illustrating the rear construction and wicker pattern.
- Place Cushions: Position the olefin seat cushions onto the chair seats. The cushions are designed to fit snugly and provide comfort.
Image: An outdoor patio scene demonstrating the StyleWell lounge chairs in a complete patio furniture set, including a sofa and coffee table, on a woven rug.
Operating Instructions
These lounge chairs are designed for stationary outdoor seating. Place them on a level, stable surface such as a patio, deck, or sunroom floor. The chairs are suitable for individual use. Ensure the area around the chairs is clear to allow for comfortable movement.
Maintenance
Regular maintenance will help preserve the appearance and extend the life of your lounge chairs.
- Cleaning the Wicker Frame: Wipe the wicker frame with a soft cloth dampened with mild soap and water. Rinse thoroughly with clean water and dry completely to prevent water spots. Avoid harsh chemicals or abrasive cleaners.
- Cushion Care: The olefin cushions are fade-resistant and designed to repel moisture. For general cleaning, spot clean with mild soap and water. Allow to air dry completely. For deeper cleaning, refer to the care tag on the cushion. Store cushions indoors during prolonged periods of non-use or inclement weather to extend their lifespan.
- Frame Inspection: Periodically inspect the steel frame for any signs of rust or damage. Touch up any scratches with rust-inhibiting paint if necessary.
- Hardware Check: Regularly check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability.
- Winter Storage: During winter months or periods of heavy rain/snow, it is recommended to store the chairs indoors or cover them with a protective outdoor furniture cover to prevent weather damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair feels wobbly after assembly. | Hardware not fully tightened or uneven surface. | Ensure all bolts and screws are securely tightened. Move the chair to a flat, level surface. |
| Cushions appear discolored or stained. | Exposure to dirt, spills, or prolonged sunlight. | Clean cushions according to maintenance instructions. Store indoors or cover when not in use for extended periods. |
| Wicker appears faded or brittle. | Prolonged exposure to harsh UV rays or extreme weather. | While the wicker is all-weather, extreme conditions can cause wear. Consider using a protective cover when not in use. |
Specifications
| Feature | Detail |
|---|---|
| Brand | StyleWell |
| Model Number (ASIN) | B08WLJ16TP |
| Special Feature | Arm Rest, Cushion Availability |
| Unit Count | 2.0 Count (2 chairs) |
| Recommended Uses | Lounge |
| Pattern | Solid |
| Room Type | Patio Garden |
| Age Range (Description) | Adult |
| Included Components | Cushion |
| Surface Recommendation | Hard Floor |
| UPC | 028776937368 |
| Form Factor | Recliner |
| Item Weight | 1.52 pounds |
| Date First Available | February 14, 2021 |
Warranty and Support
For warranty information or customer support, please refer to the documentation included with your purchase or contact StyleWell customer service directly. Keep your purchase receipt for warranty claims.
For further assistance, visit the StyleWell official website or contact their customer support line. Specific contact details are typically provided on the product packaging or a separate warranty card.
