Furmax T-OCRC Blue Leather Office Gaming Chair Instruction Manual

Introduction

Thank you for choosing the Furmax T-OCRC Blue Leather Office Gaming Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.

The Furmax T-OCRC Blue Leather Office Gaming Chair, featuring a black and blue design with white stitching.

Safety Information

• Do not exceed the maximum weight capacity of 300 pounds.
• Ensure proper assembly for stability before use.
• Maintain proper posture during use to prevent discomfort or injury.
• Keep the chair away from hazards such as water, excessive heat sources, or open flames.
• Avoid standing on the chair or using it as a step stool.

Package Contents

Please verify that all components are present before beginning assembly:

• Chair Backrest
• Seat Cushion with attached armrests
• Star Base
• Caster Wheels (5x)
• Gas Lift Cylinder
• Gas Lift Cover
• Assembly Hardware (screws, Allen wrench)

Assembly Instructions

Follow these steps to assemble your Furmax T-OCRC chair:

1. Attach Caster Wheels to Star Base: Insert each of the five caster wheels into the holes at the end of each leg of the star base. Push firmly until they click into place.
2. Install Gas Lift: Place the gas lift cylinder into the center hole of the assembled star base. Cover the gas lift cylinder with the gas lift cover.
3. Attach Seat to Gas Lift: Carefully place the seat cushion assembly onto the top of the gas lift cylinder. Ensure it is centered and securely seated.
4. Secure Backrest: Align the backrest with the pre-drilled holes on the seat cushion's side brackets. Use the provided screws and Allen wrench to firmly attach the backrest to the seat.

Detailed dimensions of the Furmax T-OCRC chair, including seat width, seat depth, backrest width, and backrest height.

Operating Instructions

• Height Adjustment: To raise the seat, lift the lever located under the right side of the seat while standing up. To lower the seat, lift the lever while seated.


Illustration of the chair's adjustable height feature, showing the range from 15.2 to 18.3 inches.

• Rocking Mechanism: Pull out the lever on the left side of the seat to enable the rocking function. Push the lever in to lock the chair in an upright position.


Visual guide for engaging and disengaging the rocking mechanism, indicating 'Push in for lock' and 'Pull out for reclining'.

• Swivel Function: The chair features a 360-degree swivel function for easy movement and access to your workspace.

Maintenance

• Cleaning: Wipe the leather and mesh surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Inspection: Periodically check all screws and bolts to ensure they are tight. Re-tighten if necessary.
• Lubrication: If the wheels or gas lift become stiff, a small amount of silicone-based lubricant can be applied.

Close-up views highlighting the waterproof and skin-friendly properties of the chair's materials.

Troubleshooting

• Chair not adjusting height: Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement.
• Chair is wobbly: Check all assembly screws and bolts to ensure they are securely tightened.
• Squeaking noises: Apply a small amount of lubricant to moving parts, especially around the base and tilt mechanism.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact Furmax customer service directly. Contact details can typically be found on the manufacturer's website or on the product packaging.