Introduction
This manual provides essential information for the safe operation, maintenance, and troubleshooting of your RYOBI ONE+ HP 18V Brushless Cordless 4-Mode 1/2 in. Impact Wrench, model P262. Please read this manual thoroughly before using the tool to ensure proper function and to prevent injury. This tool is designed for fastening and loosening nuts and bolts in various applications.
General Safety Information
Always follow basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury.
- Work Area Safety: Keep the work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Electrical Safety: Power tool plugs must match the outlet. Never modify the plug in any way. Avoid body contact with earthed or grounded surfaces (e.g., pipes, radiators, ranges, refrigerators) as there is an increased risk of electric shock if your body is earthed or grounded.
- Personal Safety: Always wear eye protection. Use hearing protection when operating power tools for extended periods. Dress properly; avoid loose clothing or jewelry that can be caught in moving parts.
- Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source and/or remove the battery pack before making any adjustments, changing accessories, or storing power tools.
- Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs.
Product Overview
The RYOBI ONE+ HP 18V Brushless Cordless 4-Mode 1/2 in. Impact Wrench (P262) is a high-performance tool designed for demanding fastening and loosening applications. It incorporates advanced brushless motor technology for increased power and runtime, along with multiple speed settings and integrated LED worklights for enhanced user control and visibility.
Figure 1: RYOBI ONE+ HP 18V Brushless Cordless 4-Mode 1/2 in. Impact Wrench (P262). This image displays the main unit of the impact wrench, highlighting its ergonomic grip, 1/2 inch anvil, and the RYOBI ONE+ HP branding on the side.
Key Features:
- Brushless Motor: Delivers up to 600 ft./lbs. of breakaway torque and 450 ft./lbs. of fastening torque for efficient operation.
- 4-Mode Settings: Provides precise user control over speed and torque for a variety of applications, including an intelligent Auto mode.
- 1/2 in. Anvil with Friction Ring: Ensures quick and secure socket changes, preventing accidental detachment during use.
- Tri-Beam LED Worklights: Integrated lights illuminate the work area automatically when the trigger is pressed, improving visibility in low-light conditions.
- Die Cast Gear Case: Constructed for maximum durability and extended tool life.
- Cordless Operation: Part of the RYOBI 18V ONE+ System, offering portability and convenience (battery and charger sold separately).
Setup
Battery Installation and Removal:
- To Install: Align the ribs on the battery pack with the grooves in the tool's battery port. Slide the battery pack into the tool until it clicks securely into place.
- To Remove: Press the latch button on the battery pack and pull the battery pack out of the tool.
Note: Ensure the battery is fully charged before initial use. Refer to your battery charger's manual for specific charging instructions.
Socket Installation:
- Ensure the tool is turned off and the battery pack is removed for safety.
- Push the desired 1/2 inch impact-rated socket onto the anvil until it snaps securely into place over the friction ring.
- To remove, firmly pull the socket off the anvil.
Operating Instructions
Powering On/Off:
To turn the tool on, depress the trigger. To turn the tool off, release the trigger. The tool will stop immediately upon trigger release.
Direction of Rotation (Forward/Reverse):
The direction of rotation is controlled by the forward/reverse selector switch located above the trigger. Push the switch to the left for forward rotation (tightening) and to the right for reverse rotation (loosening). Position the switch in the center to lock the trigger and prevent accidental starting.
4-Mode Selector:
The impact wrench features a 4-mode selector button to adjust speed and torque for different applications. Press the mode selector button to cycle through the available modes, indicated by LED lights on the tool:
- Mode 1 (Low Speed): Provides lower torque and speed, suitable for delicate applications or when precise control is required.
- Mode 2 (Medium Speed): Offers balanced speed and torque for general fastening and loosening tasks.
- Mode 3 (High Speed): Delivers maximum torque and speed, ideal for breaking loose stubborn fasteners or high-torque applications.
- Auto Mode: This intelligent mode is designed to prevent over-tightening and over-loosening. When fastening, it will stop impacting once a certain torque is reached. When loosening, it will reduce speed once the fastener is broken loose to prevent it from flying off.
Tip: Always start with a lower mode and increase as needed to avoid damaging fasteners or workpieces. Test on a scrap piece if unsure.
Using the Tri-Beam LED Worklights:
The Tri-Beam LED worklights illuminate automatically when the trigger is depressed, providing improved visibility of your work area. They turn off when the trigger is released.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your tool.
General Cleaning:
Keep the tool clean and free of debris. Use a clean, dry cloth to wipe down the exterior. Do not use solvents or harsh chemicals, as these can damage plastic parts and electrical components. Periodically blow compressed air through the ventilation openings to clear dust.
Lubrication:
This tool is factory lubricated and sealed. No additional lubrication is required by the user.
Inspection:
Periodically inspect the tool for any signs of damage, loose fasteners, or worn parts. Pay close attention to the anvil and friction ring for wear. If any issues are found, discontinue use and have the tool serviced by a qualified technician.
Storage:
Store the tool in a dry, secure location out of reach of children. Remove the battery pack before storing for extended periods to prevent accidental activation and preserve battery life. Avoid storing in direct sunlight or extreme temperatures.
Troubleshooting
If your impact wrench is not functioning as expected, refer to the following common issues and solutions:
- Tool does not start:
- Ensure the battery pack is fully charged and properly installed.
- Check that the forward/reverse selector is not in the center (locked) position.
- Verify the battery terminals are clean and free of debris.
- Reduced power or torque:
- The battery pack may be low on charge. Recharge the battery.
- Ensure you are using the appropriate mode setting (e.g., Mode 3 for maximum torque) for the task.
- The socket may be worn or damaged. Use only impact-rated sockets in good condition.
- Excessive vibration or unusual noise:
- Stop using the tool immediately. This could indicate internal damage. Contact customer support or an authorized service center.
For issues not covered here, or if troubleshooting steps do not resolve the problem, contact RYOBI customer support or an authorized service center.
Specifications
- Model: P262
- Voltage: 18V DC
- Anvil Size: 1/2 inch with Friction Ring
- Breakaway Torque: Up to 600 ft./lbs.
- Fastening Torque: Up to 450 ft./lbs.
- Impacts Per Minute (IPM): Up to 3,200 IPM
- Operation Mode: Battery
- Head Style: Hex
- Finish Type: Powder Coated
- Item Weight: Approximately 4.03 lbs (tool only)
- Item Length: Approximately 8.01 inches
- Material: Plastic
Warranty Information
This RYOBI tool is covered by a 3-year manufacturer's warranty. For specific terms and conditions, including limitations and exclusions, please refer to the warranty card included with your product or visit the official RYOBI website. Keep your proof of purchase for all warranty claims.
Customer Support
For technical assistance, replacement parts, or service inquiries, please contact RYOBI customer support. Visit www.ryobitools.com for contact information, frequently asked questions, and additional product resources.
