1. Important Safety Information
Please read all instructions carefully before using the appliance and retain them for future reference. This manual provides important safety warnings and guidelines for the proper use and maintenance of your washing machine.
- Ensure the washing machine is connected to a grounded power outlet.
- Do not allow children to play with or operate the appliance.
- Do not wash items that are soiled with flammable substances (e.g., gasoline, solvents) as this may cause fire or explosion.
- Always unplug the machine before cleaning or performing any maintenance.
- Do not open the detergent dispenser or door during operation, especially during hot wash cycles.
- Ensure proper ventilation around the machine.
2. Product Overview
The Toshiba 8 kg Front Load Washing Machine (Model TWD-BK90S2(WK)) is designed for efficient and convenient laundry care. It features an Inverter motor for quiet operation and energy efficiency, a digital display for easy program selection, and a durable ABS material construction.
Figure 2.1: Front view of the Toshiba 8 kg Front Load Washing Machine, showing the main door, control panel, and detergent dispenser.
2.1 Components
- Control Panel: Features a knob for program selection and a digital LED display for cycle information.
- Detergent Dispenser: Compartments for pre-wash, main wash detergent, and fabric softener.
- Drum: Stainless steel drum for washing clothes.
- Door: Front-loading door with a secure locking mechanism.
- Drain Pump Filter: Located at the bottom front, accessible for cleaning.
Figure 2.2: Close-up view of the control panel, highlighting the program selection knob and digital LED display.
3. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your washing machine. It is recommended to have the appliance installed by a qualified technician.
3.1 Unpacking
- Remove all packaging materials, including the polystyrene base and any protective film.
- Important: Locate and remove the transit bolts from the rear of the machine. These bolts secure the drum during transport and must be removed before operation to prevent damage. Keep them for future transport.
3.2 Location Requirements
- Place the machine on a firm, level surface to minimize vibration and noise.
- Ensure there is adequate space for ventilation around the machine.
- Avoid direct sunlight or extreme temperatures.
3.3 Water Supply Connection
- Connect the inlet hose to a cold water tap with a 3/4-inch thread.
- Ensure all connections are tight to prevent leaks.
3.4 Drain Hose Connection
- Secure the drain hose to a standpipe or over the edge of a sink, ensuring it is not kinked.
- The drain hose should be positioned at a height between 60 cm and 100 cm from the floor.
3.5 Power Connection
- Plug the power cord into a dedicated, grounded electrical outlet.
- Do not use extension cords or adapters.
4. Operating Instructions
Follow these steps for optimal washing results.
4.1 Preparing Laundry
- Sort laundry by fabric type, color, and degree of soiling.
- Check garment care labels for washing instructions.
- Empty pockets and close zippers and hooks to prevent damage.
4.2 Loading Laundry
- Open the washing machine door.
- Place laundry loosely into the drum, ensuring not to overload. The maximum capacity is 8 kg.
- Close the door firmly until it clicks.
4.3 Adding Detergent and Softener
- Pull out the detergent dispenser drawer.
- Add appropriate amounts of detergent to the main wash compartment (II) and pre-wash compartment (I) if required.
- Add fabric softener to the softener compartment (flower symbol).
- Push the dispenser drawer back in completely.
4.4 Selecting a Wash Program
- Turn the program selection knob to choose the desired wash cycle. Available cycles include: Normal, Heavy Duty, Delicates, Quick Wash, Rinse.
- The digital display will show the default settings for the selected program.
4.5 Adjusting Settings (Optional)
- Use the control panel buttons to adjust temperature, spin speed, or add extra rinse options if available for the selected program.
4.6 Starting the Cycle
- Press the 'Start/Pause' button to begin the wash cycle.
- The door will lock, and the machine will start filling with water.
4.7 Pausing/Canceling a Cycle
- To pause, press the 'Start/Pause' button. The door may unlock if the water level and temperature are safe.
- To cancel, press and hold the 'Start/Pause' button for a few seconds, or turn the program knob to 'Off'. The machine will drain the water.
4.8 End of Cycle
- The machine will signal the end of the cycle (e.g., with a beep or display message).
- The door will unlock. Open the door and remove the laundry promptly to prevent wrinkles.
- Leave the door slightly ajar to allow the drum to air dry and prevent odors.
5. Maintenance and Cleaning
Regular maintenance ensures the longevity and optimal performance of your washing machine.
5.1 Cleaning the Detergent Dispenser
- Pull out the dispenser drawer completely.
- Remove any removable parts and rinse them under running water.
- Clean the inside of the dispenser housing with a brush.
- Reassemble and reinsert the drawer.
5.2 Cleaning the Drum
- Run a maintenance wash cycle (e.g., a hot wash with no laundry and a descaling agent or washing machine cleaner) periodically to remove detergent residue and odors.
5.3 Cleaning the Door Seal
- Wipe the rubber door seal after each wash to remove lint, dirt, and moisture. This prevents mold and odors.
5.4 Cleaning the Drain Pump Filter
- Open the cover at the bottom front of the machine.
- Place a shallow container to catch any residual water.
- Slowly unscrew the filter counter-clockwise.
- Remove any lint, coins, or foreign objects from the filter and its housing.
- Rinse the filter under running water and screw it back in tightly. Close the cover.
5.5 Exterior Cleaning
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
6. Troubleshooting
Before contacting service, check the following common issues and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | No power; Door not closed; Program not selected; Start button not pressed. | Check power supply; Ensure door is latched; Select program; Press Start button. |
| No water intake | Water tap closed; Inlet hose kinked; Water pressure too low. | Open water tap; Straighten hose; Check water supply. |
| Water not draining | Drain hose kinked; Drain pump filter blocked; Drain pump faulty. | Straighten hose; Clean drain pump filter; Contact service if issue persists. |
| Excessive vibration/noise | Transit bolts not removed; Machine not level; Uneven load. | Remove transit bolts; Adjust leveling feet; Redistribute laundry. |
| Error code on display | Specific malfunction. | Refer to the specific error code in the full manual (if available) or contact customer support. |
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Toshiba |
| Model Info | TWD-BK90S2(WK) |
| Product Dimensions | 108.6 x 74.6 x 108.6 cm |
| Item Weight | 108 kg |
| Capacity | 8 Kilograms (Wash) |
| Installation Type | Freestanding |
| Special Features | Inverter |
| Color | White |
| Control Console | Knob |
| Access Location | Front Load |
| Material Type | ABS |
| Cycle Options | Normal, Heavy Duty, Delicates, Quick Wash, Rinse |
8. Warranty and Support
Your Toshiba 8 kg Front Load Washing Machine comes with a 2-Year Warranty from the date of purchase, covering manufacturing defects under normal use conditions. Please retain your purchase receipt as proof of warranty.
8.1 Installation Support
For professional installation assistance, please contact the following numbers:
- Riyadh: +966 -11- 4094006 Ext 113
- Jeddah: +966- 12- 6577714
- Dammam: +966-13- 8343691
- Qassim: +966 581044198
- Abha: +966 593322785
8.2 Customer Service
For any other inquiries, technical support, or warranty claims, please contact Toshiba customer service through their official channels. Ensure you have your model number (TWD-BK90S2(WK)) and purchase details ready when contacting support.
