1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Juno E-Series 5-6 inch LED Recessed Lighting. The E-Series combines reliable performance with energy-saving LED technology, offering a rated life of 50,000 hours. These fixtures are suitable for both new construction and retrofitting in various residential and light commercial environments.
For detailed installation diagrams and safety warnings, please refer to the official Installation Manual (PDF).
2. Safety Information
Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture. Ensure all electrical connections comply with local codes and ordinances. If you are unsure about any part of the installation, consult a qualified electrician. Do not attempt to modify the fixture in any way not described in this manual.
3. Package Contents
Your Juno E-Series LED Recessed Lighting package typically includes:
- Juno E-Series LED Recessed Downlights (6-pack)
- E26 Socket Adapters
- Installation Hardware
Image: A 6-pack of Juno E-Series LED recessed lights, showing the white baffle trim and black housing.
4. Setup and Installation
The Juno E-Series LED recessed lights are designed for easy installation into existing 5-inch to 6-inch recessed cans. Follow these general steps:
- Prepare the Housing: Ensure power is off at the circuit breaker. Remove the existing bulb and trim from the recessed can.
- Connect the Adapter: Screw the provided E26 socket adapter into the housing socket.
- Select Color Temperature: Before installing, use the switch located on the back of the retrofit trim to select your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
- Connect the Trim: For E-Series Switchable White models, connect the trim directly to the E26 socket adapter. For other retrofit models, plug the connector provided on the trim into the mating connector on the E26 socket adapter.
- Insert into Housing: Squeeze the torsion springs (for 5" or 6" housings) or use the provided push-in friction springs (for 4" housings) to insert the trim into the housing. Gently push the trim up evenly on all sides until it is flush with the ceiling.
Image: A single Juno E-Series LED recessed light showing the attached E26 socket adapter, ready for installation into a recessed can.
Image: The underside of the Juno E-Series LED light, highlighting the switch used to select between five different color temperatures.
Video: An official installation guide demonstrating the process of installing the Juno E-Series LED Retrofit Downlight. This video covers connecting the E26 socket adapter and inserting the trim into the housing.
5. Operating Instructions
Your Juno E-Series LED Recessed Lighting offers versatile lighting options:
- Switchable Color Temperature: The fixture features a switch on the back that allows you to choose from five color temperatures: 2700K (Warm White), 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), and 5000K (Daylight). Adjust this setting prior to final installation to match your preference or room's ambiance.
- Dimming Capability: These lights are dimmable down to 10% with most standard incandescent dimmers, providing flexibility for various lighting needs and moods.
- Energy Efficiency: The fixtures are Energy Star certified, consuming minimal wattage while delivering ample lumens for effective room illumination. They also comply with California Title 24 Part 6 high efficacy LED light source requirements.
Image: A visual chart explaining correlated color temperature (CCT), showing examples of Soft White (2700K), Warm White (3000K), Neutral White (3500K), Cool White (4000K), and Daylight (5000K).
6. Maintenance
The Juno E-Series LED Recessed Lighting is designed for minimal maintenance. The LED light source has a long lifespan and is not user-replaceable. To clean the fixture, ensure power is off and gently wipe the trim with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.
7. Troubleshooting
If you experience issues with your Juno E-Series LED Recessed Lighting, consider the following:
- Light Not Turning On: Check the circuit breaker to ensure power is supplied to the fixture. Verify that the E26 socket adapter is securely screwed into the housing and the trim is properly connected.
- Flickering Light: Ensure the dimmer switch (if used) is compatible with LED lighting and is rated for the fixture's wattage. Loose connections can also cause flickering; re-check all connections.
- Incorrect Color Temperature: Verify the switch on the back of the trim is set to the desired color temperature.
If problems persist, contact customer support for assistance.
8. Specifications
Key specifications for the Juno E-Series LED Recessed Lighting (Model: 65BEMW SWW5 90CRI CP6 M2):
| Feature | Specification |
|---|---|
| Brand | Juno |
| Model Name | E-Series |
| Item Model Number | 65BEMW SWW5 90CRI CP6 M2 |
| Size | 5-to-6-Inch, 900 Lumens (6-Pack) |
| Color | White |
| Material | Aluminum |
| Style | Baffle Trim |
| Light Source Type | LED |
| Brightness | 900 Lumen |
| Wattage | 54 watts |
| Voltage | 120 Volts |
| Special Feature | Adjustable Color Temperature, Dimmable |
| Installation Type | Permanent Ceiling Mount |
| Product Dimensions | 7.63"L x 7.63"W x 3.67"H |
| UPC | 194994160571 |
Image: A technical drawing of the Juno E-Series LED light with key dimensions labeled, including overall diameter and height.
9. Warranty and Support
The Juno E-Series LED Recessed Lighting comes with a 5-year limited manufacturer's warranty. For warranty claims or technical support, please refer to the contact information provided by Juno or Acuity Brands. You can also visit the Juno Store on Amazon for more product information and resources.
