Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Heiden Nova 2 Double Watch Winder. Designed for automatic watches, this winder features a direct-drive brushless motor and advanced LCD digital controls, ensuring optimal care for your timepieces.

Important Safety Information
- Use only the provided AC power adapter. Using an incorrect adapter may damage the unit and void the warranty.
- Keep the device away from water, high humidity, and direct exposure to liquids.
- Do not attempt to disassemble, modify, or repair the unit yourself. Refer all servicing to qualified personnel.
- Place the winder on a stable, level surface to prevent tipping.
- Avoid exposing the winder to direct sunlight, extreme temperatures, or strong magnetic fields.
- Keep out of reach of children and pets.
Package Contents
- Heiden Nova 2 Double Watch Winder Unit
- AC Power Adapter
- Instruction Manual (this document)
Setup Guide
1. Unpacking and Placement
Carefully remove the watch winder from its packaging. Place the unit on a flat, stable surface, ensuring adequate ventilation around the device. Avoid placing it near heat sources or in enclosed spaces.

2. Power Connection
Connect the provided AC power adapter to the power input port located at the rear of the winder. Plug the adapter into a standard electrical outlet. Ensure the connection is firm.

3. Inserting Your Watches
Open the winder's front door. Gently compress the adjustable soft pillow and secure your automatic watch onto it. Insert the pillow with the watch into one of the winding rotors. Ensure the watch is securely seated and does not obstruct the rotor's movement. Repeat for the second watch if desired.

Operating Instructions
The Heiden Nova 2 features independent controls for each winding rotor, allowing for customized settings for two watches simultaneously.

Control Panel Overview
Each winding module has its own control panel with an LCD display, TPD (Turns Per Day) adjustment knob, and Direction selection knob.
1. Power On/Off
Press the circular power button on each control panel to turn the respective winding module on or off. The LCD display will illuminate when powered on.
2. Adjusting Turns Per Day (TPD)
Rotate the TPD adjustment knob (+/-) to set the desired Turns Per Day. The LCD display will show the current TPD setting. Settings are adjustable in increments of 50, ranging from 300 to 2000 TPD. Refer to your watch manufacturer's recommendations for optimal TPD.
3. Selecting Winding Direction
Rotate the Direction selection knob to choose the winding mode:
- CW: Clockwise rotation.
- CCW: Counter-clockwise rotation.
- Bi-directional: Alternating clockwise and counter-clockwise rotation.
Automatic Vertical Orientation
When the watch winder is at rest or turned off, the watch will automatically orient vertically to provide an optimal display position.
Maintenance
Cleaning
Wipe the exterior of the winder with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish. For the glass display, apply a small amount of glass cleaner to a cloth, then gently wipe the glass surface.
Watch Pillows
The soft velvet watch pillows can be gently cleaned with a lint roller or a soft brush to remove dust and debris.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Winder does not turn on. | No power supply or loose connection. | Ensure the AC adapter is securely connected to the winder and a working electrical outlet. Verify the power button for the specific module is pressed. |
| Watch is not winding. | Incorrect TPD or direction setting; watch not properly seated. | Consult your watch manufacturer's specifications for recommended TPD and direction. Adjust settings accordingly using the control panel. Ensure the watch is securely placed on the pillow and does not obstruct the rotor's movement. |
| Unusual noise during operation. | Watch not properly seated or internal issue. | Ensure watches are securely placed on their pillows and are not touching the winder's interior or other watches. If the noise persists, discontinue use and contact customer support. |
Specifications
- Model: HD24-BLACK
- Dimensions: 13.43 x 10.55 x 9.33 inches
- Weight: 9.51 Pounds
- Power Source: Corded Electric
- Motor Type: Direct Drive Brushless Motor
- TPD Settings: 300-2000 TPD, adjustable in increments of 50
- Winding Directions: Clockwise, Counter-clockwise, Bi-directional
- Display: Back-lit LCD Digital Controls
- Exterior Finish: Hand-painted high gloss black
- Interior Material: Soft black linen
- Watch Pillows: Adjustable soft velvet
Warranty and Customer Support
Warranty
This Heiden Nova 2 Double Watch Winder comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, troubleshooting assistance, or warranty claims, please contact Heiden customer support. Our US-based support team is available to assist you with product inquiries and technical support.
You can find contact information on the official Heiden website or through your retailer's support channels.