1. Introduction
Thank you for choosing the Fire-Boltt Blast 1600 Wired Over-Ear Headphone with Mic. This manual provides essential information for the safe and efficient use of your new headphones. Please read it thoroughly before use and retain it for future reference.
2. What's in the Box
The Fire-Boltt Blast 1600 package includes the following items:
- Fire-Boltt Blast 1600 Wired Over-Ear Headphone
- Ear Cushions (pre-installed or spare)
- Headband (integrated)
- Audio Cable with 3.5mm jack and in-line microphone
3. Product Features
The Fire-Boltt Blast 1600 headphones are designed for superior audio experience and comfort. Key features include:
- Superior Sound: Equipped with large 50mm speaker unit drivers and neodymium magnets for powerful bass, clear vocals, and crisp high tones.
- Comfortable Design: High-quality padded ear cushions and an adjustable, stretchable headband ensure maximum comfort and noise isolation for extended listening.
- Single-Side Monitoring: 90° swiveling earcups allow for convenient single-ear monitoring, ideal for DJ use or mixing.
- Durable Construction: Made with black matte plastic and chrome finish trims, designed for durability and frequent use.
- In-line Microphone: Integrated microphone for hands-free calls and media control.
Image: Overview of Fire-Boltt Blast 1600 features.
Image: Ergonomic design for comfort.
Image: Extra Bass feature.
Image: 50mm Neodymium Drivers for high-quality sound.
4. Setup Instructions
Follow these steps to set up your Fire-Boltt Blast 1600 headphones:
- Unpack: Carefully remove the headphones and all accessories from the packaging.
- Connect Audio Cable: Insert the 3.5mm jack of the audio cable into the audio input port on the left earcup of the headphones. Ensure it is securely connected.
- Connect to Device: Plug the other end of the 3.5mm audio cable into the headphone jack of your audio source (e.g., smartphone, laptop, MP3 player, mixer).
- Adjust Fit: Place the headphones over your ears. Adjust the headband by sliding it up or down until the earcups comfortably cover your ears and the headband rests gently on your head. The earcups can swivel 90 degrees for a better fit or single-ear monitoring.
5. Operating Instructions
Once connected, you can begin using your Fire-Boltt Blast 1600 headphones for audio playback and calls.
5.1 Audio Playback
- Ensure the headphones are properly connected to your audio source.
- Start playing audio from your device.
- Adjust the volume using your audio source's volume controls.
5.2 In-line Microphone and Remote Control
The audio cable features an in-line microphone and a single-button remote control for managing calls and music playback.
Image: In-line remote control functions.
- Play/Pause Music: Press the button once to play or pause music.
- Answer/End Call: Press the button once to answer an incoming call. Press the button once again to end an active call.
- Reject Call: Press and hold the button for approximately 2 seconds to reject an incoming call.
- Next Track: Press the button twice quickly to skip to the next track.
- Previous Track: Press the button three times quickly to go to the previous track.
5.3 Single-Side Monitoring
The earcups can swivel 90 degrees, allowing you to easily shift one earcup away from your ear for single-side monitoring, useful in professional audio environments or when you need to hear your surroundings.
Image: Single-side monitoring in use.
6. Maintenance and Care
Proper care will extend the life and performance of your headphones.
- Cleaning: Use a soft, dry cloth to clean the earcups and headband. Do not use harsh chemicals or abrasive materials.
- Storage: When not in use, store the headphones in a clean, dry place, away from extreme temperatures and direct sunlight. The headphones are collapsible for easier storage.
- Avoid Moisture: While the headphones have some water resistance, avoid submerging them in water or exposing them to heavy rain.
- Cable Care: Avoid sharp bends or excessive pulling on the audio cable to prevent damage.
7. Troubleshooting
If you encounter issues with your headphones, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or low volume |
|
|
| Microphone not working |
|
|
| Sound distortion |
|
|
8. Specifications
Technical specifications for the Fire-Boltt Blast 1600 headphones:
| Feature | Detail |
|---|---|
| Brand | Fire-Boltt |
| Model Number | BH1600 |
| Ear Placement | Over Ear |
| Form Factor | Over Ear |
| Noise Control | Sound Isolation |
| Audio Driver Size | 50 Millimetres |
| Headphone Jack | 3.5 mm Jack |
| Network Connectivity Technology | Wired |
| Control Type | Media Control |
| Control Method | Remote |
| Compatible Devices | Devices with 3.5 mm audio input |
| Cable Features | Retractable |
| Product Features | Collapsible |
| Water Resistance Level | Water Resistant |
| Material | Plastic |
| Manufacturer | Savex Technologies |
9. Warranty and Support
Warranty: The Fire-Boltt Blast 1600 headphones come with a 1-year manufacturing warranty covering all manufacturing defects only. Please retain your proof of purchase for warranty claims.
Customer Support: For any product-related inquiries, technical assistance, or warranty claims, please contact Fire-Boltt customer support through their official website or the retailer where the product was purchased. You can find more information on the Fire-Boltt Store on Amazon.