Qianli iCopy Plus 2.1 Multi-functional Programmer Instruction Manual

1. Introduction

The Qianli iCopy Plus 2.1 is a multi-functional device designed for professional iPhone repair and data transfer. It supports various iPhone models from 7 to 11 Pro Max, enabling technicians to read, write, and transfer data for components such as LCD screens, vibrators, EEPROM chips, battery information, and lighting boards. This manual provides comprehensive instructions for its proper use and maintenance.

2. Product Overview

The iCopy Plus 2.1 features an ergonomic design for comfortable operation. It includes a main unit with a display and control buttons, along with interchangeable function boards for different repair tasks.

Image: The Qianli iCopy Plus 2.1 device, showcasing its ergonomic design and user interface for various functions.

Image: A top-down view of the iCopy Plus 2.1 main unit alongside its various interchangeable function boards.

Image: Detailed dimensions of the Qianli iCopy Plus 2.1 device and its retail packaging.

3. Setup

3.1 Unpacking and Initial Inspection

Carefully remove the iCopy Plus 2.1 from its packaging. Inspect the device and all included accessories for any signs of damage.

3.2 Connecting Power

Connect the device to a power source using a standard USB cable. The device is designed with a built-in battery for portable use.

3.3 Attaching Function Boards

Select the appropriate function board for your repair task (e.g., LCD board, battery board). Align the board with the connector pins on the main unit and gently press it into place until secure.

4. Operating Instructions

4.1 General Operation

• Power On/Off: Press and hold the "OFF/ON" button to power the device on or off.
• Navigation: Use the navigation buttons (up, down, select) to browse through the menu options on the display.
• Language Switching: The device supports language switching, typically between Chinese and English. Refer to the on-screen prompts for specific steps.

4.2 LCD/Vibrator Data Transfer

This function allows reading data from an original LCD or vibrator and writing it to a new replacement part to restore functions like True Tone.

1. Attach the LCD/Vibrator function board to the iCopy Plus 2.1.
2. Connect the original iPhone screen or vibrator to the corresponding port on the function board.
3. Select the "Read" option on the iCopy Plus 2.1 to extract data from the original component.
4. Disconnect the original component and connect the new replacement screen or vibrator.
5. Select the "Write" option to transfer the saved data to the new component.
6. Verify that functions like True Tone are restored after installation.

Image: The iCopy Plus 2.1 performing LCD chip data reading and writing, connected to an iPhone screen.

4.3 Logic Base Band Data Reading & Writing

This feature is used for reading and writing data related to the logic baseband, often requiring soldering.

1. Attach the Logic Base Band function board.
2. Solder jump wires to connect the motherboard's welding spots to the iCopy Plus Connector Board.
3. Press "Read" and "Write" simultaneously to enter the chip programming interface.
4. Click "Read" to retrieve data. Welding spot charts can be downloaded from the Qianli official website for guidance.

Image: The iCopy Plus 2.1 connected to an iPhone motherboard for logic baseband data reading and writing.

4.4 Battery Data Transfer

Used to transfer battery health and cycle data from an original battery to a new replacement, preventing "Important Battery Message" warnings.

1. Attach the Battery function board.
2. Connect the original battery to the board and read its data.
3. Connect the new battery and write the data.

4.5 Lighting Board Function

This function addresses issues related to the iPhone's lighting board. Specific procedures depend on the exact issue and available function boards.

5. Maintenance

5.1 Cleaning

Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid liquid cleaners.

5.2 Firmware Updates

Periodically check the Qianli official website for firmware updates. Updating the firmware can improve device performance, add new features, and fix bugs. Follow the instructions provided on the website carefully during the update process.

6. Troubleshooting

• True Tone Not Restored: Ensure the original screen data was successfully read and written to the new screen. Verify the screen is compatible with the iCopy Plus 2.1 and the specific iPhone model.
• Battery Health/Warning Messages Persist: Confirm that the battery data transfer was completed correctly. Some newer iPhone models or specific battery types may require additional steps or specialized cables not included with the standard unit.
• Device Not Powering On: Check the power connection and ensure the built-in battery is charged.
• Connection Issues: Ensure all function boards and iPhone components are securely connected. Clean connectors if necessary.
• "Read" or "Write" Failures: This could indicate a faulty component, an incorrect connection, or a need for a firmware update. Consult the Qianli official website for specific error codes or troubleshooting guides.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact Qianli directly through their official website or authorized distributors. Keep your purchase receipt as proof of purchase.