MOTTURA Serie Personal Under 11.1331 Key-Operated Wall Safe Instruction Manual

1. Introduction and Overview

Thank you for choosing the MOTTURA Serie Personal Under 11.1331 Key-Operated Wall Safe. This high-quality security safe is designed to protect your valuables, documents, and other important items. It features a robust construction and a reliable key locking mechanism, certified to EN 14450 S2 standards for security.

To ensure proper installation, operation, and longevity of your safe, please read this instruction manual thoroughly before use. Keep this manual in a safe place for future reference.

Image 1.1: Front view of the MOTTURA Serie Personal Under 11.1331 wall safe, showing its keyhole and robust door.

2. Safety Information

Heavy Item: The safe weighs 40 kg. Exercise extreme caution when handling and moving the safe to prevent injury. Always use appropriate lifting techniques or seek assistance.
Secure Installation: Proper installation is crucial for the safe's security. Ensure the safe is securely anchored to a structurally sound wall as per the instructions. Improper installation can compromise security and may lead to injury.
Key Security: The safe operates with a key lock. Keep all keys in a secure location, away from the safe itself and out of reach of unauthorized individuals. Never store spare keys inside the safe.
Children and Pets: Keep children and pets away from the safe during installation and operation.
Maintenance: Do not attempt to modify or repair the safe yourself. Refer to the maintenance section or contact qualified personnel for service.

3. Package Contents

Please check the contents of your package carefully. If any items are missing or damaged, contact your retailer immediately.

MOTTURA Serie Personal Under 11.1331 Wall Safe Unit
Set of Double-Bit Keys (typically 2 keys)
Instruction Manual (this document)
Mounting Hardware (e.g., anchor bolts, washers) - Note: Specific hardware may vary.

4. Setup and Installation

The MOTTURA Serie Personal Under 11.1331 is designed as a wall safe, requiring professional installation into a suitable wall structure. Incorrect installation can severely compromise the safe's security and stability. If you are unsure about any step, consult a qualified professional.

4.1. Choosing a Location

Select a location in a structurally sound wall (e.g., brick, concrete, or reinforced stud wall).
Consider a discreet or concealed location for added security.
Ensure there are no electrical wires, plumbing, or other obstructions within the wall at the chosen installation site.

4.2. Required Tools (Not Supplied)

Measuring tape and pencil
Level
Angle grinder or wall saw (for cutting wall opening)
Drill with appropriate masonry bits
Hammer
Wrench/Spanner (for anchor bolts)
Protective gear (gloves, safety glasses, dust mask)

4.3. Installation Steps (General Guidance)

Mark and Cut Opening: Carefully measure the safe's external dimensions (H.395 L 495 T 325 mm) and mark the precise opening on the wall. Cut the opening using appropriate tools, ensuring a snug fit for the safe body.
Prepare Cavity: Clear any debris from the wall cavity. Ensure the cavity is deep enough to accommodate the safe's depth (325 mm) and allow for flush mounting.
Insert Safe: Carefully slide the safe into the prepared wall opening. Use a level to ensure it is perfectly horizontal and vertical.
Secure Anchoring: The safe features pre-drilled holes for anchoring. Mark the positions of these holes on the wall. Remove the safe, drill pilot holes into the wall, and then re-insert the safe. Secure it firmly using the provided anchor bolts and washers. Tighten all bolts securely.
Finish Wall: Once the safe is securely anchored, finish the surrounding wall area with plaster, drywall, or other suitable material to conceal the installation and integrate the safe seamlessly.

Important: Always ensure the safe door is closed and locked during installation to prevent accidental opening or damage.

5. Operation

The MOTTURA Serie Personal Under 11.1331 safe uses a high-security double-bit key lock.

5.1. Opening the Safe

Insert one of the supplied double-bit keys fully into the keyhole.
Turn the key clockwise (or counter-clockwise, depending on the specific lock mechanism) until the locking bolts retract. You should feel a distinct click.
Pull the door open.

5.2. Closing and Locking the Safe

Ensure all items are placed inside the safe and nothing obstructs the door from closing completely.
Close the safe door firmly.
Insert the key into the keyhole.
Turn the key counter-clockwise (or clockwise) until the locking bolts extend and the door is securely locked.
Remove the key and store it in a secure, separate location.

Key Management: It is highly recommended to keep one key as a spare in a very secure, separate location, not inside the safe. Never give keys to unauthorized persons.

6. Maintenance

Regular, simple maintenance will help ensure the smooth operation and longevity of your MOTTURA safe.

Cleaning: Wipe the exterior of the safe with a soft, damp cloth. Avoid abrasive cleaners or solvents, as these can damage the finish.
Lock Mechanism: The key lock mechanism is designed for maintenance-free operation. Do not apply oil, grease, or any lubricants into the keyhole or locking mechanism, as this can attract dust and cause malfunctions. Keep the keyhole clean and free of debris.
Door Hinges: Periodically check the door hinges for any signs of wear or looseness. If the door does not open or close smoothly, contact customer support.
Mounting Security: Occasionally check the security of the safe's mounting. Ensure all anchor bolts remain tight and the safe is firmly fixed in the wall.

7. Troubleshooting

If you encounter any issues with your MOTTURA safe, refer to the following common problems and solutions.

Problem	Possible Cause	Solution
Key does not turn or is stiff.	Wrong key inserted. Debris in keyhole. Lock mechanism obstruction.	Ensure you are using one of the original supplied keys. Gently try to clear any visible debris from the keyhole. Do not force the key. If the problem persists, contact customer support.
Door does not open after turning key.	Bolts not fully retracted. Door seal sticking.	Ensure the key is turned fully until the bolts retract. Apply gentle pressure to the door while turning the key.
Door does not close or lock properly.	Obstruction inside the safe. Door misaligned.	Check for items blocking the door or locking bolts. Ensure the safe is installed level and square. If misalignment is severe, professional assistance may be required.

If you cannot resolve the issue using the troubleshooting guide, please contact MOTTURA customer support for assistance.

8. Specifications

Brand	MOTTURA
Model Number	11.1331 (Serie Personal Under)
Lock Type	Key (Double-Bit)
Color	Black
Material	Alloy Steel
Item Weight	40 Kilograms
External Dimensions (H x L x D)	395 mm x 495 mm x 325 mm
Certification	EN 14450 S2

9. Warranty and Support

MOTTURA products are manufactured to high standards and are designed for durability and security. For specific warranty information regarding your MOTTURA Serie Personal Under 11.1331 safe, please refer to the warranty card included with your purchase or visit the official MOTTURA website.

For technical support, spare parts, or any other inquiries, please contact MOTTURA customer service through their official channels. When contacting support, please have your safe's model number (11.1331) and purchase details readily available.

MOTTURA Official Website: www.mottura.it (Please check for local country-specific websites if applicable.)

MOTTURA 11.1331