SEGA SG94977

Download PDF
Contents

SEGA Demon Slayer: Kimetsu no Yaiba PM Perching Figure Shinobu Kocho Instruction Manual

Brand: SEGA | Model: SG94977

1. Introduction

This manual provides essential information for the SEGA Demon Slayer: Kimetsu no Yaiba PM Perching Figure featuring Shinobu Kocho. This is an official licensed product designed for display. Please read these instructions carefully to ensure proper handling and care of your figure.

2. What's in the Box

Upon opening the package, verify that all components are present:

  • Shinobu Kocho Figure
  • Base Stand
Image of the product packaging for the Shinobu Kocho figure.

Figure packaging sample. The figure and base stand are securely packed inside.

3. Safety Information

WARNING:

  • Keep away from small children. This product contains small parts that may pose a choking hazard.
  • This product is intended for display purposes only and is not a toy.
  • Avoid dropping the figure, as this may cause damage or breakage.

4. Setup and Assembly

The Shinobu Kocho figure is designed to perch. Follow these steps for proper setup:

  1. Carefully remove the figure and its base stand from the packaging.
  2. Identify the designated perching area on the base stand.
  3. Gently place the Shinobu Kocho figure onto the base stand, ensuring it is stable and balanced. The figure's legs are designed to hang over the edge of a surface.
Front view of the Shinobu Kocho figure perching on its base stand.

Front view of the Shinobu Kocho figure correctly placed on its base stand.

Side view of the Shinobu Kocho figure perching on its base stand, showing the butterfly-wing pattern on her haori.

Side view illustrating the figure's perching posture and the detail of her attire.

5. Display and Placement

To maintain the figure's condition and appearance, consider the following:

  • Place the figure on a stable, flat surface to prevent accidental falls.
  • Avoid direct sunlight exposure, as prolonged exposure can cause colors to fade.
  • Keep the figure away from extreme temperatures or high humidity.
  • Ensure the display area is free from dust and debris.
Another front view of the Shinobu Kocho figure, highlighting its detailed design.

The figure is designed with intricate details, suitable for prominent display.

Close-up view of Shinobu Kocho figure's face and upper body, showing facial expression and uniform details.

Detailed view of the figure's craftsmanship, including facial features and uniform.

6. Maintenance and Care

To keep your figure in optimal condition:

  • Dust the figure regularly with a soft, dry cloth or a soft brush.
  • Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the paint or material.
  • For stubborn dirt, lightly dampen a soft cloth with water and gently wipe the affected area, then dry immediately.

7. Troubleshooting

If you encounter any issues with your figure:

  • Figure is unstable on the base: Ensure the figure is correctly seated on the base stand. Check for any obstructions or uneven placement.
  • Minor dust accumulation: Refer to the "Maintenance and Care" section for cleaning instructions.

8. Specifications

FeatureDetail
Product Dimensions6 x 6 x 8 inches
Item Weight6.3 ounces
ASINB08W2TN54N
Item Model NumberSG94977
Manufacturer Recommended Age15 years and up
Release DateSeptember 1, 2021
ManufacturerSEGA

9. Warranty and Support

This product is an official licensed item from SEGA. For any inquiries regarding manufacturing defects or product support, please contact the official SEGA customer service or the retailer from whom the product was purchased. Please retain your proof of purchase for warranty claims, if applicable.

© 2026 SEGA. All rights reserved. Demon Slayer: Kimetsu no Yaiba is a registered trademark.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.