1. Introduction
Thank you for choosing the Teka C1RTK Carbon Filter. This manual provides essential information for the proper installation, operation, and maintenance of your new filter. Please read these instructions carefully before use and retain them for future reference.
2. Product Overview
The Teka C1RTK is a conventional activated carbon filter designed for use in kitchen hoods operating in recirculation mode. Its primary function is to purify the air by removing cooking odors and grease particles, allowing clean air to be reintroduced into your kitchen environment.
- Recirculation Function: Specifically designed for use in kitchen hoods operating in recirculation mode. It effectively eliminates odors and air contaminants, ensuring clean air is returned to the kitchen.
- Cleaner Environment: This activated carbon filter helps maintain a cleaner and healthier kitchen by removing unpleasant odors and grease particles from the air.
- Square Design: The filter features a square design for easy adaptation to the hood's internal space. Its carbon color provides a discreet and aesthetic appearance.

Figure 1: Front view of the Teka C1RTK Carbon Filter.

Figure 2: Angled view of the Teka C1RTK Carbon Filter, showing its square shape.
3. Compatibility
The Teka C1RTK Carbon Filter is compatible with the following Teka hood models:
- DLV Series
- DVT 68660
- DVT 78660
- DVT 98660
Ensure your hood model is listed above for proper fit and function.
4. Installation and Replacement
The replacement of the activated carbon filter is designed to be simple and does not require special tools. Follow these general steps for installation or replacement:
- Safety First: Before beginning, ensure the extractor hood is completely turned off and disconnected from the main power supply to prevent electrical hazards.
- Locate Filter Housing: Refer to your specific hood's user manual to locate the carbon filter housing. This is typically found behind the grease filters.
- Remove Old Filter (if applicable): If replacing an old filter, carefully remove it from its housing. Note its orientation for correct installation of the new filter.
- Install New Filter: Insert the new Teka C1RTK Carbon Filter into the housing. Ensure it is securely seated and correctly oriented according to your hood's design. The square design allows for easy adaptation.
- Secure Components: Reinstall any covers or grease filters that were removed during the process.
- Reconnect Power: Once the filter is securely in place, reconnect the hood to the power supply.
Regular replacement ensures optimal performance of your extractor hood in recirculation mode.

Figure 3: Close-up view of the carbon filter material.
5. Operation
The Teka C1RTK Carbon Filter operates passively within your recirculation hood system. Once installed, it continuously filters the air drawn in by the hood, trapping odors and grease particles before the purified air is released back into the kitchen. No direct user interaction is required for its operation beyond proper installation.
6. Maintenance
Carbon filters are consumable items and require periodic replacement to maintain effective odor and grease removal. The lifespan of the filter depends on usage frequency and cooking habits. It is recommended to:
- Inspect Regularly: Visually inspect the filter every 3-6 months.
- Replace as Needed: Replace the filter when you notice a decrease in odor absorption or when the filter material appears saturated. For optimal performance, replacement is typically recommended every 6-12 months, or as indicated by your hood's specific instructions.
This filter is not washable or regenerable. Attempting to clean it will compromise its effectiveness.
7. Troubleshooting
If you experience reduced effectiveness in odor removal after installing a new filter, consider the following:
- Incorrect Installation: Ensure the filter is correctly seated and oriented within its housing. Refer to Section 4.
- Filter Saturation: If the filter has been in use for an extended period, it may be saturated and require replacement.
- Hood Malfunction: If the issue persists with a new, correctly installed filter, the problem might lie with the extractor hood itself. Consult your hood's instruction manual or contact a qualified technician.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | C1RTK |
| Manufacturer Part Number | 113290015 |
| Material | Activated Carbon |
| Compatible Devices | Extractor Hood (DLV, DVT 68660/78660/98660) |
| Product Weight | 1 Kilogram |
| Number of Items | 1 |
| Country of Origin | Spain |
| Included Components | Teka 113290015 C1RTK Regenerative Carbon Filter |
9. Warranty
This product is covered by the manufacturer's warranty. Please refer to the warranty documentation provided with your original hood purchase or contact Teka customer service for specific details regarding warranty terms and conditions.
10. Support
For further assistance, technical support, or to purchase replacement filters, please visit the official Teka website or contact their customer service department. Contact information can typically be found on the Teka website or on your original product packaging.