Introduction
This instruction manual provides guidance for assembling and caring for your Make It Real Neon Black & White Bracelets craft kit. This kit allows users to create custom beaded bracelets using the provided materials.
Recommended for ages 8 and up.
Safety Information
- Choking Hazard: This kit contains small parts (beads). Not suitable for children under 3 years. Adult supervision is recommended for all users.
- Keep all materials away from pets.
- Do not ingest any components of this kit.
- Dispose of packaging materials properly.
What's Included
Your Make It Real Neon Black & White Bracelets kit includes the following components:
- Assorted black, white, and neon cords (approximately 2 meters total).
- Over 160 assorted beads in various shapes and colors (neon, black, white).
- Assorted charms.
- PlayTray workstation.
- Instruction sheet.
Image: All components included in the kit, featuring colorful cords, a variety of beads, and small charms, laid out on a white surface.
Setup and Preparation
- Unpack Components: Carefully remove all items from the packaging.
- Prepare Workstation: Place the PlayTray workstation on a clean, flat surface. The PlayTray helps organize beads and prevents them from rolling away during assembly.
- Sort Materials: Separate cords, beads, and charms into different sections of the PlayTray or into small containers for easier access.
Operating Instructions: Bracelet Assembly
Follow these steps to create your custom bracelets:
- Choose Your Design: Decide on the colors of cords and the sequence of beads and charms you wish to use for your bracelet.
- Cut Cords: Measure and cut the desired length of cord for your bracelet. Ensure to leave extra length for tying knots. A typical bracelet length for a child is about 6-8 inches, plus 4-6 inches for knots.
- Start Beading:
- Tie a secure knot at one end of the cord, leaving a tail for later tying.
- Begin threading beads and charms onto the cord in your chosen pattern.
- For intricate designs, you may use multiple cords and braid them together as you add beads.
- Secure the Bracelet: Once all beads and charms are threaded, tie another secure knot at the other end of the cord, leaving a tail.
- Finishing Touches:
- To wear, tie the two ends of the cord together with a double knot.
- Trim any excess cord, leaving a small amount for adjustment if desired.
- Ensure knots are tight to prevent beads from falling off.
Image: Examples of completed bracelets, showcasing different designs and color combinations possible with the kit's materials.
Image: A child displaying several bracelets on her wrist, demonstrating how the finished products can be worn.
Maintenance and Care
- Storage: Store unused beads, cords, and charms in a secure container to prevent loss and keep them clean. The PlayTray can also be used for storage.
- Cleaning: If bracelets become dirty, gently wipe them with a damp cloth. Avoid harsh chemicals or excessive water, which may damage the cords or beads.
- Durability: Bracelets are designed for casual wear. Avoid prolonged exposure to water, direct sunlight, or extreme temperatures to maintain their appearance and integrity.
Troubleshooting
- Beads not fitting on cord: Ensure you are using the correct cord thickness for the bead hole size. Some beads may have smaller holes.
- Knots unraveling: Always use double knots and pull them tight. A small drop of clear craft glue (not included) can be applied to knots for extra security once the bracelet is finalized.
- Running out of materials: This kit is designed to create five bracelets. If more materials are desired, similar craft supplies can be purchased separately.
Specifications
| Brand | Make It Real |
| Model Name | Neon Black & White Bracelets |
| Model Number | 1209 |
| UPC | 695929012090 |
| Number of Pieces | 175 (including cords, beads, and charms) |
| Recommended Age | 8 years and up |
| Material | Plastic (beads), Textile (cords) |
| Product Dimensions | 1.57 x 6.3 x 9.84 inches (packaging) |
| Item Weight | 4.2 ounces |
Warranty Information
This product is a craft kit and does not typically come with a specific warranty for individual components once opened and used. Please inspect all components upon receipt. If any parts are missing or damaged upon arrival, please contact customer support within 30 days of purchase.
Customer Support
For questions, missing parts, or assistance, please contact Make It Real customer support:
- Website: makeitrealplay.com
- Email: Refer to the product packaging or official website for the most current contact email.
- Phone: Refer to the product packaging or official website for the most current contact number.
When contacting support, please have your product model number (1209) and purchase information ready.
