Lexicon Voda Metal Counter Height Writing Desk with 6 Storage Shelves

Introduction

Thank you for choosing the Lexicon Voda Metal Counter Height Writing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The Lexicon Voda Counter Height Writing Desk, featuring a weathered natural brown top and black metal frame, shown in a modern home office environment with decorative items on the shelves.

Safety Information

• Always assemble the desk on a soft, clean surface to prevent scratches.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not overload the desk or shelves. The maximum weight recommendation for the desk is 100 pounds.
• Keep small parts and packaging materials away from children and pets to prevent choking hazards.
• Use caution when moving the assembled desk to avoid injury or damage.

Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Desk Top (1)
• Leg Frames (2)
• Center Leg Frame (1)
• Shelves (6)
• Hardware Pack (Screws, bolts, Allen wrench, etc.)

Setup and Assembly Instructions

Assembly of the Lexicon Voda Writing Desk is required. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface. Identify each component using the package contents list.
2. Assemble Leg Frames: Attach the leg frames to the center leg frame using the provided hardware. Ensure all connections are finger-tightened initially.
3. Install Shelves: Secure the six shelves into the designated slots on the leg frames. Ensure they are level and properly seated.
4. Attach Desk Top: Carefully place the desk top onto the assembled frame. Align the pre-drilled holes on the desk top with the holes on the frame. Secure the desk top using the provided screws.
5. Final Tightening: Once all components are in place, systematically tighten all screws and bolts with the provided Allen wrench until secure. Do not overtighten.
6. Position Desk: Carefully lift and move the assembled desk to its desired location. Avoid dragging the desk to prevent damage to the legs or floor.

Image: Front view of the Lexicon Voda Writing Desk, illustrating the overall structure and placement of the six storage shelves within the metal frame.

Image: Back view of the Lexicon Voda Writing Desk, highlighting the robust metal frame construction and how the shelves are integrated into the support structure.

Operating Instructions

The Lexicon Voda Writing Desk is designed for use as a workspace and storage unit. Its counter height design is suitable for standing work or use with a counter-height stool.

• Use the spacious desktop for writing, computer work, or other tasks.
• Utilize the six open shelves for organizing books, files, office supplies, or decorative items.
• Distribute weight evenly across the desktop and shelves to maintain stability.

Maintenance

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Wood Care: For the engineered wood top, avoid prolonged exposure to moisture and direct sunlight. Use coasters under drinks to prevent water rings.
• Metal Frame Care: The powder-coated metal frame can be cleaned with a damp cloth. Avoid scratching the finish.
• Hardware Check: Periodically inspect all screws and bolts to ensure they remain tight. Re-tighten as needed to maintain structural integrity.

Image: A detailed view of the desk's top surface, showcasing the weathered natural brown finish and wood grain texture of the engineered wood with ash veneers.

Troubleshooting

Desk feels wobbly after assembly:

Ensure all screws and bolts are fully tightened. Check that the desk is placed on a level surface. If necessary, adjust the feet (if applicable) or place shims under the legs to stabilize.

Difficulty inserting screws during assembly:

Verify that you are using the correct screw for the designated hole. Do not force screws; ensure proper alignment before tightening. If a hole appears stripped, contact customer support for assistance.

Scratches on surfaces:

Minor scratches on the wood finish may be touched up with a wood repair marker. For deeper scratches or damage to the metal frame, contact customer support for advice.

Specifications

Image: Front dimension diagram of the Lexicon Voda Writing Desk, indicating a width of 60 inches and a height of 36 inches.

Image: Side dimension diagram of the Lexicon Voda Writing Desk, illustrating a depth of 28 inches and a height of 36 inches.

Warranty and Support

For information regarding product warranty, please refer to the documentation included with your purchase or contact Lexicon customer support directly. If you have any questions, require replacement parts, or need assistance with assembly or troubleshooting, please visit the official Lexicon website or contact their customer service department.

You can find more information and contact details by visiting the Lexicon Store on Amazon.