Lineeye LE-200PR Multi-Protocol Analyzer / Communication Data Logger

1. Product Overview

The Lineeye LE-200PR is a versatile PC-connected multi-protocol analyzer and communication data logger designed for advanced communication analysis and data recording. It supports various communication protocols and offers flexible operation modes.

Figure 1: Lineeye LE-200PR Multi-Protocol Analyzer. This image shows the compact, silver-colored device with a black front panel. The front panel features LED indicators for Power, Error, Run, Act, SD, U1, RD, U2, and WiFi, along with the model number 'LE-200PR' and 'MULTI PROTOCOL ANALYZER LINEEYE' text.

Key Features:

• PC-Connected Protocol Analysis: When connected to a PC, it functions as an RS-232C/RS-422/RS-485 protocol analyzer. It supports synchronous communication (BSC, HDLC) in addition to 1Mbps asynchronous communication (ASYNC, PPP, etc.), offering both monitoring and simulation capabilities.
• Wireless Remote Measurement: Supports wireless remote measurement via Wi-Fi connection, providing flexibility in various testing environments.
• Standalone Data Logger: When used independently, it operates as a communication data logger, capable of saving long-term communication data directly to an SD card.

2. Included Components

Please verify that all the following items are included in your package:

• RS-232C Monitor Cable (LE-25M1)
• Mini USB Cable
• External Trigger Cable (LE-4TG)
• Analysis Software CD
• SD Card (8GB)
• Instruction Manual (this document)

3. Setup Guide

Follow these steps to set up your LE-200PR unit:

1. Unpack the Device: Carefully remove the LE-200PR unit and all included accessories from the packaging.
2. Insert SD Card: Insert the provided 8GB SD card into the designated SD card slot on the LE-200PR unit. Ensure it is inserted correctly until it clicks into place.
3. Connect to Power: Connect the LE-200PR to a suitable power source using the appropriate power adapter (not explicitly listed as included, but implied for operation). The device does not use batteries.
4. Install Software: Insert the Analysis Software CD into your PC's CD/DVD drive and follow the on-screen instructions to install the necessary analysis software. Ensure your PC meets the minimum system requirements.
5. Connect to PC (for analysis): Use the Mini USB Cable to connect the LE-200PR unit to your PC. This connection enables PC-based protocol analysis and simulation.
6. Connect to Device Under Test: Depending on your application, use the RS-232C Monitor Cable (LE-25M1) or other appropriate cables (e.g., for RS-422/RS-485) to connect the LE-200PR to the communication lines of the device you wish to analyze.
7. External Trigger Connection (Optional): If using external triggering, connect the External Trigger Cable (LE-4TG) to the LE-200PR and your external trigger source.

4. Operating Instructions

4.1. PC-Connected Protocol Analysis/Simulation

1. Ensure the LE-200PR is connected to your PC via the Mini USB cable and powered on.
2. Launch the installed analysis software on your PC.
3. Configure the communication parameters (baud rate, data bits, parity, stop bits, protocol type) within the software to match the device under test.
4. Select either monitoring mode to capture and analyze communication data, or simulation mode to generate and send specific data patterns.
5. Utilize the software's features for real-time data display, filtering, decoding, and logging.

4.2. Standalone Communication Data Logging

1. Ensure the SD card is inserted into the LE-200PR.
2. Connect the LE-200PR to the communication lines you wish to log.
3. Refer to the detailed instructions in the full instruction manual (provided on CD) for configuring standalone logging parameters (e.g., trigger conditions, logging duration) using the device's interface or pre-configuration via PC.
4. The LE-200PR will automatically log communication data to the SD card.
5. To retrieve data, remove the SD card and insert it into a card reader connected to your PC, then use the analysis software to view and process the logged data.

4.3. Wi-Fi Remote Measurement

1. Ensure the LE-200PR's Wi-Fi function is enabled (refer to the full manual for specific steps).
2. Connect your PC or mobile device to the LE-200PR's Wi-Fi network.
3. Access the remote measurement interface through the analysis software or a dedicated application/web interface (details in the full manual).
4. Perform monitoring and control operations remotely.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the LE-200PR. Do not use liquid cleaners or abrasive materials.
• Storage: Store the device in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
• Cable Care: Inspect all cables regularly for signs of wear or damage. Replace any damaged cables immediately.
• Software Updates: Periodically check the Lineeye official website for software and firmware updates to ensure optimal performance and compatibility.

6. Troubleshooting

If you encounter issues with your LE-200PR, please refer to the following common troubleshooting steps:

For more detailed troubleshooting or issues not covered here, please refer to the comprehensive manual on the Analysis Software CD or contact Lineeye customer support.

7. Specifications

8. Warranty and Support

For detailed information regarding the product warranty, technical support, and service, please refer to the official documentation provided with your LE-200PR unit (e.g., the full instruction manual on the Analysis Software CD) or visit the official Lineeye website.

Lineeye provides comprehensive support for its products, including FAQs, software downloads, and contact information for technical assistance.