Introduction
This manual provides comprehensive instructions for the safe installation, proper operation, and effective maintenance of your VIGO Sutton VG08021ST Shower Panel System. Please read all instructions carefully before beginning installation or operation to ensure optimal performance and longevity of the product.
Image: The VIGO Sutton Shower Panel System in Stainless Steel, installed in a contemporary bathroom setting.
Safety Information
Always follow local plumbing and building codes. Ensure water supply is turned off before installation. If you are unsure about any part of the installation process, consult a qualified professional plumber.
Product Components
The VIGO Sutton Shower Panel System includes the following main components:
- Shower Panel with integrated controls
- Adjustable Square Rainfall Shower Head
- 4 High-Pressure Body Jets
- Hand Shower Wand with 58-inch FlexFlow Hose
- Mounting Hardware (Bracket, Screws, Anchors)
- Supply Lines
- Thermostatic Valve
- Pressure Balance/Scald Guard
- Vacuum Breaker
Setup and Installation
Pre-Installation
Before installation, verify all components are present and undamaged. Ensure your wall can support the weight of the shower panel and that water supply lines (hot and cold) are accessible at the desired installation height.
Tools Required
- Drill
- Drill bits (appropriate for wall material)
- Measuring Tape
- Level
- Pencil or Marker
- Adjustable Wrench
- Plumber's Tape
Installation Steps
- Turn off Water Supply: Locate the main water shut-off valve and turn off both hot and cold water supplies to the shower area.
- Position the Panel: Hold the shower panel against the wall at the desired height. Use a level to ensure it is straight. Mark the locations for the mounting bracket and water supply connections.
- Install Mounting Bracket: Drill pilot holes at the marked locations for the mounting bracket. Insert wall anchors if necessary, then secure the mounting bracket to the wall using the provided screws.
- Connect Water Supply Lines: Connect the hot and cold water supply lines from your wall to the corresponding inlets on the back of the shower panel. Use plumber's tape on all threaded connections to prevent leaks. Ensure connections are tight but do not overtighten.
- Mount the Panel: Carefully hang the shower panel onto the installed mounting bracket. Secure the bottom of the panel to the wall if additional mounting points are available.
- Test for Leaks: Slowly turn the main water supply back on. Check all connections for leaks. If leaks are detected, turn off the water supply and re-tighten the connections.
Image: Front view dimensions of the VIGO Sutton Shower Panel, indicating a height of 58 1/16 inches and a width of 5 inches.
Image: Side view dimensions of the VIGO Sutton Shower Panel, showing a height of 58 1/16 inches, a width of 5 inches, and a depth of 12 7/8 inches.
Video: This video provides a 360-degree view of the VIGO Sutton Shower Panel System, showcasing its design and components from all angles.
Operating Instructions
The VIGO Sutton Shower Panel System features an EZDivert knob for easy function selection and separate controls for water temperature and flow.
Temperature and Flow Control
- Temperature Knob: Rotate the lower knob to adjust the water temperature.
- Flow Control: The main handle controls the water flow. Lift or turn to increase/decrease flow.
Function Selection (EZDivert Knob)
The top EZDivert knob allows you to switch between the different shower functions:
- Rainfall Shower: Turn the EZDivert knob to activate the overhead rainfall showerhead. The pivoting showerhead provides full-body water coverage.
- Massage Jets: Turn the EZDivert knob to activate the four high-pressure body jets. These jets provide a targeted 1.8 GPM water flow.
- Handheld Shower: Turn the EZDivert knob to activate the handheld shower wand. The 58-inch FlexFlow hose offers extended reach and versatility for various showering needs.
Image: The VIGO Sutton Shower Panel System in operation, demonstrating water flow from both the rainfall showerhead and the body jets.
Image: A detailed view of the VIGO Sutton Shower Panel's control knobs and square body jets, highlighting the functional design.
Video: This video demonstrates the operational features of the VIGO Sutton Shower Panel System, including the rainfall shower, massage jets, and handheld shower functions.
Maintenance
Cleaning the Shower Panel
To maintain the finish of your VIGO Sutton shower panel, clean regularly with a soft cloth and mild soap or a non-abrasive cleaner. Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the stainless steel finish.
Self-Cleaning Nozzles
The rainfall showerhead and body jets are equipped with soft silicone nozzles. These nozzles are designed to resist mineral deposits and soap scum buildup. To clean, simply rub the nozzles with your finger or a soft cloth to dislodge any accumulated debris. This helps maintain optimal water flow and pressure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Pressure | Partially closed shut-off valve; clogged nozzles; mineral buildup in supply lines. | Ensure all shut-off valves are fully open. Clean silicone nozzles by rubbing them. Consult a plumber if supply lines are suspected to be clogged. |
| Water Leaks from Connections | Loose connections; insufficient plumber's tape. | Turn off water supply. Tighten connections. Apply additional plumber's tape if necessary. |
| Inconsistent Water Temperature | Thermostatic valve issue; water heater settings. | Check water heater settings. If the issue persists, contact customer support or a qualified plumber to inspect the thermostatic valve. |
| EZDivert Knob Not Switching Functions | Internal mechanism obstruction or wear. | Ensure no external obstruction. If the knob is stuck or not functioning, contact customer support. |
Specifications
- Model Number: VG08021ST
- Brand: VIGO
- Color: Stainless Steel
- Material: Aluminum (Panel), Brass (Handle)
- Finish Type: Stainless Steel
- Number of Handles: 1
- Mounting Type: Wall Mount
- Dimensions (H x W): 58 1/16 inches x 5 inches
- Depth: 12 7/8 inches
- Item Weight: 19 Pounds
- Hand Shower Hose Length: 58 inches
- Massage Jet Flow Rate: 1.8 GPM
- Included Components: All Mounting Hardware, Bracket, Hand Shower, Handles, Pressure Balance/Scald Guard, Supply Lines, Thermostatic Valve, Vacuum Breaker
- UPC: 849922059433
Warranty Information
VIGO provides a limited lifetime warranty for the Sutton VG08021ST Shower Panel System. This warranty covers manufacturing defects and ensures quality assurance. For specific terms and conditions, or to make a warranty claim, please refer to the official VIGO warranty documentation or contact VIGO customer support.
Customer Support
If you require assistance with installation, operation, or troubleshooting that is not covered in this manual, please contact VIGO customer support. Have your model number (VG08021ST) and purchase information ready when you call or email.
VIGO Customer Service:
- Contact information typically found on the manufacturer's website or product packaging.