Introduction
The Doona Car Seat & Stroller is an innovative all-in-one travel system designed for infants from 4 lbs to 35 lbs. It seamlessly transitions from a car seat to a compact stroller, offering convenience for parents on the go. This manual provides essential information for the safe and proper use, installation, and maintenance of your Doona Car Seat & Stroller.
Please read this manual thoroughly before using the product and keep it for future reference. Always prioritize your child's safety by following all instructions and warnings.
What's Included
Your Doona Car Seat & Stroller package includes the following components:
- Doona Car Seat
- Doona Stroller (integrated)
- Doona Infant Insert and Head Support
- Doona Vehicle Seat Protector
- Doona LATCH Car Seat Base
Figure 1: All included components of the Doona Car Seat & Stroller system.
Setup and Installation
Unboxing and Initial Setup
Carefully remove all components from the packaging. Ensure all listed items are present. The Doona Car Seat & Stroller comes pre-assembled as an integrated unit.
Video 1: Unboxing and initial setup of the Doona Car Seat & Stroller.
Infant Insert and Head Support
The Doona Infant Insert and Head Support are designed to provide near-flat ergonomic support for newborns, ensuring proper alignment of the neck and back. Use these components for infants weighing 4 lbs to 11 lbs (or until the infant outgrows them).
Figure 2: Doona Car Seat with Infant Insert and Head Support installed.
Car Seat Installation (with or without LATCH Base)
The Doona Car Seat can be installed in a vehicle using the LATCH Car Seat Base or directly with the vehicle's seat belt. Always ensure the car seat is rear-facing only.
- Place the Doona Vehicle Seat Protector on your vehicle's seat to protect upholstery.
- For LATCH installation: Secure the LATCH Car Seat Base according to its separate instruction manual. Ensure it is tightly installed and does not move more than one inch in any direction.
- Place the Doona Car Seat onto the installed LATCH Base until it clicks securely into place. Verify the indicators show a secure connection.
- For seat belt installation (without base): Follow the detailed instructions in the Doona Car Seat manual for proper routing and tightening of the vehicle's seat belt. Ensure the car seat is stable and secure.
The one-click secure mechanism ensures correct installation every time.
Operating Instructions
Transforming from Car Seat to Stroller
The Doona transitions from car seat to stroller in seconds, allowing for seamless movement without disturbing your child.
- Ensure the car seat is removed from the vehicle or base.
- Locate the release button/lever (usually at the back or side of the car seat).
- Press the release button/lever and extend the handle upwards.
- The wheels will automatically deploy, transforming the car seat into a stroller.
- Adjust the handlebar to your desired height for comfortable pushing.
Figure 3: Step-by-step transformation from car seat to stroller.
Video 2: Demonstration of transforming the Doona Car Seat & Stroller.
Securing Your Child
Always secure your child using the 5-point safety harness. Ensure the straps are snug against your child's body and the chest clip is at armpit level.
Figure 4: Child secured in the Doona Car Seat with 5-point harness.
Braking System
The Doona features a foot-activated braking system. Press the red pedal to engage the brake and the green pedal to release it. Always engage the brake when the stroller is stationary.
Maintenance
Cleaning Instructions
The fabric materials of the Doona Car Seat & Stroller are washable. Refer to the care labels on the fabric for specific washing instructions. For the frame and plastic parts, wipe clean with a damp cloth and mild soap. Do not use abrasive cleaners.
Storage
When not in use, store the Doona in a cool, dry place away from direct sunlight. Ensure it is in its compact car seat mode for optimal storage.
Troubleshooting
- Wheels not deploying/retracting smoothly: Ensure all release levers are fully engaged/disengaged. Check for any obstructions in the wheel mechanism.
- Car seat not securing to base: Verify the LATCH base is correctly installed and tightened. Ensure the car seat is properly aligned with the base connectors before pushing down firmly.
- Harness difficult to adjust: Check for any twists in the harness straps. Ensure the harness adjuster button is fully pressed when attempting to loosen or tighten.
If you encounter persistent issues, please refer to the detailed troubleshooting section in the full product manual or contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Suitable Age Range | Infant |
| Rear Facing Minimum Weight | 4 Pounds |
| Maximum Weight Recommendation | 35 Pounds (15 Kilograms) |
| Rear Facing Car Seat Maximum Height | 32 Inches |
| Car Seat/Stroller Weight | 17.2 lbs |
| LATCH Base Weight | 9.7 lbs |
| Folded Dimensions (L x W x H) | 17.4 x 26 x 22.4 inches |
| Open Dimensions (L x W x H) | 17.4 x 32.3 x 39 inches |
| Harness Type | 5 Point |
| Material Type | PA+GF, PP, Al, PU, Polyester, EPS |
| Safety Certifications | TUV, FAA, REACH |
Warranty
The Doona Car Seat & Stroller comes with a Manufacturer's Warranty. For specific details regarding coverage, duration, and claims process, please refer to the warranty card included with your product or visit the official DOONA website.
Support
For further assistance, product registration, or to purchase accessories, please visit the official DOONA Store or contact customer service:
- Official DOONA Store: DOONA on Amazon
- Refer to your product packaging for direct customer service contact information.
