AFI Orlando Queen Size Platform Bed with Footboard & Twin XL Trundle in White

1. Introduction

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your AFI Orlando Queen Size Platform Bed with Footboard and Twin XL Trundle. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image 1: The AFI Orlando Queen Size Platform Bed with Footboard and Twin XL Trundle in White. This image displays the complete bed setup in a bedroom environment, showcasing its design and the trundle unit extended.

2. Safety Information

• Always follow assembly instructions precisely.
• Ensure all hardware is securely tightened before use. Periodically check and re-tighten as necessary.
• Do not exceed the maximum weight capacity of 800 lbs for the bed.
• Keep small parts and packaging materials away from children during assembly.
• Do not allow children to play on or under the bed without supervision.
• The trundle bed is designed for a mattress height of up to 8 inches. Using a thicker mattress may impede its proper function.
• This product is made of wood. Proposition 65 Warning: This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

3. Components List

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, contact customer support.

• Headboard
• Footboard
• Side Rails
• Slat Kit (for main bed)
• Trundle Unit (including frame and slats)
• Surface Mount Turbo Charger (with 6-foot cord)
• All necessary hardware (screws, bolts, Allen wrenches)
• Installation Manual (this document)

4. Assembly Instructions

Assembly of the AFI Orlando Platform Bed requires careful attention to detail. It is recommended to have two people for assembly. All necessary tools are typically included.

4.1. General Assembly Tips

• Unpack all components and lay them out on a clean, soft surface to prevent scratches.
• Identify all hardware and match them to the diagrams in the detailed assembly guide (provided separately in the packaging).
• Do not fully tighten screws until all parts are loosely assembled, then tighten securely.

4.2. Bed Frame Assembly

The main bed frame consists of the headboard, footboard, and side rails. These connect using a hook mechanism, which should be secured as per the specific instructions in your packaged manual.

Image 2: An overhead view of the bed frame with its wooden slats installed. This image illustrates the internal structure that supports the mattress, eliminating the need for a box spring.

4.3. Slat Kit Installation

The slat kit is designed for lasting durability and supports your mattress directly, increasing airflow for a more comfortable sleep. Install the slats evenly across the bed frame, ensuring they are securely fastened to the side rails.

4.4. Trundle Unit Assembly

Assemble the trundle unit according to the specific instructions. The trundle rolls easily on wheels and can be positioned on either side of the main bed. Ensure the wheels are properly attached for smooth operation.

Image 3: A side view of the bed with the trundle unit fully extended from underneath the main bed frame. This demonstrates the functional aspect of the trundle for additional sleeping space.

4.5. Charging Station Installation

The Surface Mount Turbo Charger includes 2 USB Ports (.5V/3.5A) and an ETL listed 6-foot cord. Install the charging station in the designated location on the bed frame, typically on the headboard or side rail, ensuring the cord is safely routed and plugged into a power outlet.

Image 4: A close-up view of the Surface Mount Turbo Charger, showing its two USB ports and compact design, integrated into the bed frame.

5. Operating Instructions

5.1. Adjustable Headboard

The headboard features two height options to accommodate various mattress heights and foundation combinations. To adjust the headboard height, follow the specific instructions in your assembly manual. The tall height is 37.25 inches, and the low height is 33.5 inches.

Image 5: A diagram illustrating the two adjustable height options for the headboard: Tall Height (37.25 inches) and Low Height (33.5 inches).

5.2. Trundle Bed Usage

The Twin XL trundle unit can be easily pulled out from under the main bed to provide an additional sleeping surface. It rolls on wheels for convenience and can be positioned on either side of the bed. Ensure the trundle mattress does not exceed 8 inches in height for proper storage and movement.

5.3. USB Charging Station

Utilize the integrated Surface Mount Turbo Charger to conveniently charge your electronic devices. Simply plug your USB cables into the two available ports. Ensure the charger is connected to a live power outlet.

6. Care and Maintenance

• Cleaning: Wipe the bed frame with a dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish.
• Hardware: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability and safety.
• Trundle Wheels: Keep the trundle wheels free of dust and hair to ensure smooth operation.
• Slat Condition: Inspect the wooden slats regularly for any signs of damage or wear. Replace any broken slats immediately to maintain mattress support and prevent injury.

7. Troubleshooting

8. Product Specifications

Image 6: A technical drawing showing the detailed dimensions of the AFI Orlando Queen Size Platform Bed and its Twin XL Trundle, including length, width, and height measurements for all major components.

9. Warranty Information

This AFI Orlando Platform Bed is covered by a 1-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific details regarding coverage and how to make a claim, refer to the warranty documentation included with your product or contact AFI customer support.

10. Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact AFI Furnishings customer support. Refer to the contact information provided in your product packaging or visit the official AFI Furnishings website for support options.

For more information about AFI Furnishings and their commitment to quality and sustainable manufacturing, you may watch the video below: