1. Introduction
Thank you for choosing the BRILONER LED Panel Ceiling Light. This modern, ultra-flat LED ceiling light is designed to provide versatile and efficient illumination for various indoor spaces. Featuring dimmability, adjustable color temperature (warm white to cold white), and a unique backlight effect, it offers customizable lighting to suit your preferences. The included remote control allows for convenient operation. Please read this manual carefully before installation and use to ensure proper function and safety.
2. Safety Instructions
- Indoor Use Only: This product has an IP20 protection class and is intended exclusively for indoor environments. Do not expose to moisture or outdoor conditions.
- Electrical Safety: Installation must be performed by a qualified electrician or a person with appropriate electrical knowledge to prevent electric shock or fire hazards.
- Power Disconnection: Always disconnect the main power supply before attempting any installation, maintenance, or cleaning.
- Mounting Surface: Ensure the mounting surface is structurally sound and can support the weight of the fixture.
- Ventilation: Do not cover the fixture with insulating material or any other objects that could impede heat dissipation.
- Cleaning: Use a soft, dry cloth for cleaning. Avoid abrasive cleaners or solvents.
- Damaged Components: Do not operate the light if any part is damaged. Contact customer support for replacement parts or service.
3. Package Contents
Please check that all components are present and undamaged:
- BRILONER LED Panel Ceiling Light (Model 7081-016)
- Remote Control
- Mounting Hardware (screws, wall plugs)
- Instruction Manual
4. Installation Guide
Follow these steps for safe and correct installation:
- Prepare for Installation: Ensure the main power supply to the installation area is switched off at the circuit breaker.
- Mark Drilling Points: Hold the mounting bracket (usually attached to the light fixture) against the ceiling at the desired installation location. Use a pencil to mark the drilling points.
- Drill Holes: Drill holes at the marked points using an appropriate drill bit for your ceiling material. Insert the provided wall plugs into the drilled holes.
- Secure Mounting Bracket: Attach the mounting bracket to the ceiling using the provided screws. Ensure it is securely fastened.
- Electrical Connection: Connect the household electrical wires to the terminal block on the light fixture. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes.
- Attach Light Fixture: Carefully align the LED panel with the mounting bracket and secure it. Most fixtures slide onto the bracket or twist into place. Ensure it is firmly attached to prevent it from falling.
- Restore Power: Once the light is securely installed and all connections are checked, restore power at the circuit breaker.
Figure 4.1: Example of the LED panel ceiling light installed in a kitchen.
Figure 4.2: The LED panel ceiling light providing illumination in a hallway.
5. Operating Instructions
The BRILONER LED Panel Ceiling Light is operated using the included remote control.
Figure 5.1: BRILONER LED Panel Ceiling Light and Remote Control.
5.1 Remote Control Functions
Figure 5.2: Remote Control Button Layout and Functions.
- ON/OFF Button: Powers the light on or off.
- Light Colour Change: Adjusts the color temperature between warm white, neutral white, and cool white.
- Dim Up/Down: Increases or decreases the brightness continuously.
- Dim Levels (10%, 50%, 100%): Quickly set the brightness to predefined levels.
- Nightlight Function: Activates a very low brightness setting, ideal for night use.
- User Memory (D1, D2): Save and recall your preferred light settings.
5.2 Adjusting Brightness and Color Temperature
Use the dim up/down buttons for continuous brightness adjustment or the 10%/50%/100% buttons for quick changes. The light color change button cycles through warm white (2700K) to cool white (6500K).
Figure 5.3: Color temperature adjustment from Warm White to Cool White.
5.3 Backlight Effect
The fixture includes a backlight effect that creates a subtle glow around the main panel, enhancing the ambiance of your room.
Figure 5.4: The LED panel ceiling light demonstrating the backlight effect.
5.4 Memory Function
The light is designed to remember your last setting when turned off via the remote control. If you turn the light off and on using a wall switch, it may revert to a default setting (e.g., full brightness, cool white). To ensure your preferred setting is saved, turn the light off using the remote control first, then the wall switch. Wait approximately 30 seconds before turning it back on with the wall switch to recall the last remote-controlled setting.
6. Maintenance
To maintain the appearance and performance of your BRILONER LED Panel Ceiling Light, follow these simple guidelines:
- Cleaning: Ensure the power is off before cleaning. Wipe the surface of the light fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish or electrical components.
- No User-Serviceable Parts: The LED module is permanently installed and not user-replaceable. Do not attempt to disassemble the fixture.
7. Troubleshooting
If you encounter issues with your LED panel light, refer to the table below for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Remote control battery is dead. Incorrect wiring. | Check circuit breaker and wall switch. Replace remote control battery. Verify electrical connections (consult a qualified electrician). |
| Remote control not responding. | Battery is dead or inserted incorrectly. Obstruction between remote and light. | Replace battery, ensure correct polarity. Ensure clear line of sight to the light. |
| Light settings not saved (memory function). | Light turned off via wall switch before remote. | Always turn off the light with the remote control first, then the wall switch. Wait 30 seconds before turning on with the wall switch to recall the last remote setting. |
| Multiple lights in one room respond to a single remote. | Standard remote control pairing. | This is a characteristic of the product. Individual control of multiple identical lights in close proximity with one remote is not possible. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 7081-016 |
| Dimensions (L x W x H) | 293 x 293 x 28 mm (29.3 x 29.3 x 2.8 cm) |
| Weight | 870 g |
| Power Consumption | 18 Watt |
| Luminous Flux | 2400 Lumen |
| Color Temperature | 2700K (Warm White) to 6500K (Cool White) |
| Dimmability | Yes, stepless and preset levels via remote |
| Backlight Effect | Yes |
| Material | Plastic |
| Protection Class | IP20 (Indoor Use Only) |
| Average Lifespan | Approx. 25,000 hours |
| Power Source | AC |
Figure 8.1: Product Dimensions.
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
