SW-Motech BC.HTA.11.740.30500

Download PDF
Contents

SW-Motech PRO BLAZE H Saddlebag Set

Instruction Manual - Model BC.HTA.11.740.30500

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your SW-Motech PRO BLAZE H Saddlebag Set. Please read these instructions thoroughly before attempting to install or use the product. Retain this manual for future reference.

The SW-Motech PRO BLAZE H Saddlebag Set is designed to provide secure and convenient storage for your motorcycle. It features a robust construction and a quick-release system for ease of use.

2. Safety Instructions

  • Always ensure all components are securely fastened before riding. Loose parts can cause accidents.
  • Do not exceed the maximum load capacity specified for the saddlebags. Overloading can affect motorcycle handling and stability.
  • Distribute weight evenly between the two saddlebags to maintain balance.
  • Regularly inspect the saddlebags and mounting system for wear, damage, or loose connections.
  • Be aware that the added width of the saddlebags may affect maneuverability, especially in narrow spaces.
  • Keep the saddlebags away from hot exhaust components to prevent damage.

3. Package Contents

Verify that all items are present in your package:

  • PRO BLAZE H Saddlebags (Left and Right)
  • BLAZE Support Arms (Left and Right)
  • Mounting Hardware Kit
  • Rain Covers (2)
  • Instruction Manual

4. Setup and Installation

Installation of the PRO BLAZE H Saddlebag Set requires careful attention to detail. If you are unsure about any step, consult a qualified motorcycle mechanic.

4.1 Installing the BLAZE Support Arms

The BLAZE support arms provide the necessary clearance and stability for the saddlebags. The exact mounting points vary by motorcycle model. Refer to your motorcycle's specific mounting instructions provided with the support arms.

  1. Identify the designated mounting points on your motorcycle's rear frame or passenger footpeg mounts.
  2. Attach the BLAZE support arms using the provided mounting hardware. Ensure all bolts are tightened to the manufacturer's specifications.
  3. Verify that the support arms are securely fixed and do not interfere with any moving parts of the motorcycle (e.g., suspension, chain, wheel).
Motorcycle rear view showing the BLAZE support arms installed without saddlebags.

Image: Rear view of a motorcycle with the BLAZE support arms installed, ready for saddlebag attachment.

Close-up of motorcycle rear showing the BLAZE support arm mounting point.

Image: Detailed view of the BLAZE support arm attachment point on the motorcycle's rear.

4.2 Attaching the Saddlebags

  1. Position each saddlebag over its respective support arm.
  2. Engage the quick-release mechanism on the saddlebag with the corresponding attachment point on the support arm. Ensure a distinct 'click' or positive engagement is felt.
  3. Secure the saddlebags further using the integrated straps, typically over the passenger seat or under the tail section, to prevent movement during travel.
  4. Double-check that both saddlebags are firmly attached and do not wobble.
Pair of SW-Motech PRO BLAZE H saddlebags.

Image: The SW-Motech PRO BLAZE H saddlebags, ready for installation.

Close-up of SW-Motech PRO BLAZE H saddlebag mounted on a motorcycle.

Image: A close-up view of the PRO BLAZE H saddlebag securely mounted on the motorcycle's side.

Another close-up of SW-Motech PRO BLAZE H saddlebag mounted on a motorcycle.

Image: An alternative close-up showing the saddlebag's fit and finish on the motorcycle.

5. Operating Instructions

5.1 Loading the Saddlebags

  • Open the main compartment zipper.
  • Place items inside, ensuring heavier items are placed lower and closer to the motorcycle's center of gravity.
  • Do not overfill the bags. Ensure zippers can close easily without strain.
  • Utilize the included rain covers in wet weather conditions to protect contents.

5.2 Detaching the Saddlebags

  1. Unfasten any additional securing straps.
  2. Operate the quick-release mechanism on each saddlebag to disengage it from the support arm.
  3. Carefully lift the saddlebags off the support arms.
Motorcycle with SW-Motech PRO BLAZE H saddlebags installed, full view.

Image: A motorcycle equipped with the PRO BLAZE H saddlebag set, showcasing the overall appearance.

Rear view of a motorcycle with SW-Motech PRO BLAZE H saddlebags installed.

Image: Rear perspective of a motorcycle with the saddlebags mounted, illustrating their profile.

6. Maintenance

6.1 Cleaning

  • Clean the saddlebags with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners.
  • Allow the bags to air dry completely before storage or re-use.
  • Clean zippers regularly to ensure smooth operation.

6.2 Storage

  • Store the saddlebags in a cool, dry place away from direct sunlight when not in use.
  • Ensure the bags are empty and clean before long-term storage.

6.3 Inspection

  • Periodically check all stitching, zippers, and attachment points for signs of wear or damage.
  • Inspect the BLAZE support arms for any bends, cracks, or corrosion.
  • Ensure all mounting bolts remain tight.

7. Troubleshooting

  • Saddlebag not securing properly: Check that the quick-release mechanism is fully engaged and that no obstructions are preventing a proper fit. Ensure the support arms are correctly installed.
  • Excessive movement during riding: Verify that all securing straps are tightened and that the saddlebags are properly seated on the support arms. Ensure weight is evenly distributed.
  • Water ingress: Ensure rain covers are correctly fitted over the saddlebags in wet conditions. Check for any tears or damage to the bag material.

8. Specifications

FeatureDetail
BrandSW-Motech
Model NumberBC.HTA.11.740.30500
Capacity20 Liters (per bag, approximate)
Product Weight4.5 Kilograms (total set)
Dimensions (Package)10 x 10 x 10 cm (approximate)
TypeSoft Saddlebag

9. Warranty and Support

SW-Motech products are manufactured to high-quality standards and come with a manufacturer's warranty against defects in materials and workmanship. Please refer to the official SW-Motech website or your point of purchase for specific warranty terms and conditions.

For technical assistance, spare parts, or warranty claims, please contact SW-Motech customer support through their official website or your local distributor. When contacting support, please have your product model number (BC.HTA.11.740.30500) and proof of purchase available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.