Fel-Pro 260-1122
FEL-PRO 260-1122 Gasket Kit Instruction Manual
Model: 260-1122 | Brand: Fel-Pro
Product Overview
The FEL-PRO 260-1122 Gasket Kit provides a comprehensive set of application-specific gaskets designed for complete engine sealing. Fel-Pro gaskets are engineered to meet or exceed original equipment specifications, ensuring reliable performance and durability for professional repair environments.
Image: A complete set of FEL-PRO 260-1122 Gasket Kit components, including various engine gaskets such as head gaskets, valve cover gaskets, intake manifold gaskets, oil pan gaskets, and O-rings, laid out on a white background.
Compatibility
This gasket kit is designed for specific vehicle applications. Before installation, it is crucial to verify compatibility with your vehicle's make, model, year, engine, and trim. Refer to the following list for common applications:
- 1979-1980 Buick Century
- 1980-1981 Buick Century
- 1980-1980 Buick Electra
- 1980-1980 Buick Estate Wagon
- 1977-1980 Buick LeSabre
- 1979-1980 Buick Regal
- 1980-1981 Buick Regal
- 1977-1977 Buick Skylark
- 1979-1979 Oldsmobile Delta 88
- Pontiac Firebird (specific years/engines, verify with part number)
Note: Always cross-reference the part number 260-1122 with your vehicle's specific requirements to ensure proper fitment.
Installation Guidelines
The FEL-PRO 260-1122 Gasket Kit includes all necessary parts to complete the repair. Proper installation is critical for optimal sealing and engine performance. It is recommended that installation be performed by a qualified automotive technician.
General Steps:
- Preparation: Ensure all mating surfaces are clean, dry, and free from old gasket material, oil, or debris. Use appropriate cleaning agents and tools.
- Inspection: Inspect engine components for warpage, cracks, or damage that could affect sealing. Address any issues before gasket installation.
- Gasket Placement: Carefully position each gasket according to the engine component it seals. Ensure correct orientation and alignment with bolt holes and passages.
- Fastener Torque: Follow manufacturer's torque specifications and tightening sequences for all fasteners. Overtightening or undertightening can lead to leaks or component damage.
- Lubrication (if applicable): Some gaskets or O-rings may require light lubrication with engine oil or specific sealants as per engine manufacturer recommendations.
- Post-Installation Check: After assembly, perform a thorough check for proper fitment and ensure all connections are secure.
Consult your vehicle's service manual for detailed, step-by-step instructions specific to your engine and the components being serviced.
Maintenance and Care
Once installed, Fel-Pro gaskets are designed for long-term durability. Regular engine maintenance, such as timely oil changes and coolant flushes, contributes to the longevity of all engine components, including gaskets. Monitor for any signs of leaks (oil, coolant, exhaust) and address them promptly to prevent further damage.
Troubleshooting Common Issues
While Fel-Pro gaskets are designed for reliable sealing, issues can arise from improper installation or underlying engine problems. Here are common issues and potential causes:
| Issue | Possible Cause | Resolution |
|---|---|---|
| Oil/Coolant Leak after Installation | Improper surface preparation, incorrect torque, damaged gasket during installation, warped component. | Re-inspect surfaces, re-torque fasteners to specification, replace gasket if damaged, check components for warpage. |
| Engine Overheating | Head gasket failure (less common with new gasket), air in cooling system, other cooling system issues. | Perform cooling system pressure test, bleed air, inspect thermostat/water pump. If head gasket suspected, professional diagnosis is needed. |
| Exhaust Leak | Improperly seated exhaust manifold gasket, cracked manifold, loose fasteners. | Check gasket seating, inspect manifold, tighten fasteners. |
For persistent issues, consult a certified automotive mechanic.
Specifications
- Model Number: 260-1122
- Manufacturer: Fel-Pro
- Item Weight: 2.15 pounds
- Product Dimensions: 23.38 x 10.38 x 0.94 inches
- Exterior Finish: Machined
Warranty and Support
Fel-Pro products are manufactured to high-quality standards. For specific warranty information regarding the 260-1122 Gasket Kit, please refer to the official Fel-Pro website or contact their customer support directly. Keep your purchase receipt as proof of purchase.
For technical assistance or further inquiries, you may visit the official Fel-Pro website or contact their customer service department. Always provide the model number (260-1122) when seeking support.
Note: Warranty terms and conditions may vary.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.