ZdalaMit KT1440

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

ZdalaMit KT1440 Replacement Universal Remote Control

Model: KT1440

Introduction

The ZdalaMit KT1440 is a universal replacement remote control designed for a wide range of devices, including various TV and DVD brands. This remote is engineered for ease of use, typically requiring no complex programming. Simply insert the batteries, and it is ready for operation with many compatible models.

Setup

Battery Installation

The KT1440 remote control requires two AAA size alkaline batteries (not included). Follow these steps to install the batteries:

  1. Locate the battery compartment on the back of the remote control.
  2. Slide open the battery compartment cover.
  3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Slide the battery compartment cover back into place until it clicks securely.
ZdalaMit KT1440 remote control with battery compartment visible

Image: Rear view of the KT1440 remote control, showing the battery compartment.

Initial Use and Device Compatibility

For many compatible devices, the KT1440 remote control requires no programming. After installing the batteries, it should function directly with the following brands and models:

  • Haier: 21' CRT, 29' CRT
  • ATEC: DTV, Híbrido
  • Panda: 21' CRT
  • Parker: 21' TV2195, 14' TV14F5
  • KONKA: All Híbridos TVs, All Analógicos TVs, All Cajitas Digitales (Set-top boxes)
  • Soyea: DTV, SPD160
  • Mico: DT46-N03, DT25-2080
  • RealTv: HMA1
  • Gelec: SD-HL-215G, HD-HL-1209
  • Runch: All Cajitas Digitales (Set-top boxes)
  • Wentai: 3031/3032 (DVDs)
  • AV Link: LW 109A (DVDs)

If your device is not listed or if the remote does not function immediately, please refer to the included code list and follow the programming instructions provided with your remote for manual setup. This typically involves entering a specific code for your device brand.

Video: A seller demonstrates how to program a universal remote control for a TV using a code list. This process may be similar for the KT1440 if automatic setup does not work.

Operating Instructions

The KT1440 remote control features a standard layout for intuitive operation. Below are the primary functions:

ZdalaMit KT1440 remote control, top-down view showing all buttons

Image: Top-down view of the KT1440 remote control, highlighting the button layout.

  • Power Button (⏻): Turns the connected device on or off.
  • Number Buttons (0-9): Used for direct channel selection or entering codes during programming.
  • TV/RADIO: Toggles between TV and Radio modes.
  • CAJA DVD: Selects the set-top box or DVD input.
  • Navigation Pad (OK, Up, Down, Left, Right): Used to navigate menus and confirm selections.
  • Volume Up/Down (VOL+/VOL-): Adjusts the audio volume.
  • Channel Up/Down (CH+/CH-): Changes the channel.
  • Mute: Silences the audio.
  • Menu: Accesses the device's main menu.
  • Exit: Exits the current menu or function.
  • Input: Cycles through available input sources (HDMI, AV, etc.).
  • Playback Controls (Play, Pause, Stop, Rewind, Fast Forward): Controls media playback on compatible devices.
  • Colored Buttons (A, B, C, D): These buttons may have specific functions depending on the device and its menu options.

Maintenance

Battery Replacement

Replace the AAA batteries when the remote's performance degrades or it stops responding. Always use new alkaline batteries for optimal performance. Do not mix old and new batteries, or different types of batteries.

Cleaning

To clean the remote control, wipe it with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the remote's surface or internal components.

Troubleshooting

  • Remote not responding: Ensure batteries are correctly installed and are not depleted. Replace with new batteries if necessary.
  • Some functions not working: If the remote works partially, try re-entering the device code or attempting other codes from the provided list to find the best match for full functionality.
  • Remote LED not lighting up: Check battery installation and ensure batteries are fresh. If the issue persists, the remote may be faulty.

Specifications

BrandZdalaMit
ModelKT1440
Product Dimensions5.2 x 1.8 x 0.6 inches
Item Weight2.47 ounces
Batteries Required2 x AAA (Alkaline, not included)
ColorBlack
Special FeatureErgonomic
Max Number of Supported Devices1 (per programmed code)
Compatible DevicesTelevision, DVD, Set-top boxes (specific brands listed above)

Warranty & Support

For any questions, technical support, or warranty inquiries regarding your ZdalaMit KT1440 Universal Remote Control, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact information and warranty terms.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.